Greenheck 452583 Damper Guard Operating instructions

Document 452583

Damper Guard Installation Kit

For Use With Sidewall Propeller Fans

WALL, WALL COLLAR OR WALL HOUSING

BACKDRAFT DAMPER

Depending on mounting ﬂange

location, the damper will either

protrude into wall as shown,

or into damper guard.

DAMPER GUARD

INCLUDED HARDWARE

Description Quantity

1/4-20 x 1/2 Inch Spinlock Bolt 8

1/4-20 Inch Spinlock Nut 8

NOTE: Due to various conditions, hardware supplied

in this kit is only for attachment to the manufacturers

products. For attachment to walls and other

surfaces, fasteners to be supplied by others.

Assembly and Installation Instructions

Please read these instructions carefully before attempting to assemble and install the product

described. Protect yourself and others by observing all safety information. Failure to comply with

instructions could result in personal injury and/or property damage!