Greenheck 470998 Extension Pin Kit & Manual Quadrant kit for VCDRM Operating instructions

Greenheck
Brand
Greenheck
Model
470998 Extension Pin Kit & Manual Quadrant kit for VCDRM
Type
Operating instructions

Greenheck 470998 Extension Pin Kit & Manual Quadrant kit for VCDRM is designed to make it easier to adjust the position of a damper in a duct system. The extension pin kit includes a swivel bracket and a swivel plate that can be attached to the damper shaft. The manual quadrant kit includes a manual quadrant that can be attached to the swivel plate. This allows the user to manually adjust the position of the damper by turning the quadrant. The kit also includes decals that can be used to indicate the open and closed positions of the damper.

Greenheck 470998 Extension Pin Kit & Manual Quadrant kit for VCDRM is designed to make it easier to adjust the position of a damper in a duct system. The extension pin kit includes a swivel bracket and a swivel plate that can be attached to the damper shaft. The manual quadrant kit includes a manual quadrant that can be attached to the swivel plate. This allows the user to manually adjust the position of the damper by turning the quadrant. The kit also includes decals that can be used to indicate the open and closed positions of the damper.

Document Number 470998
Extension Pin Kit and Manual Quadrant Kit
for VCDRM Series
Installation Instructions for
Extension Pin Kit:
1) Assemble loosely swivel bracket (Item 1) onto the
swivel plate (Item 2) with nuts and bolts (Items 3 & 4)
provided.
2) Line up centerline of hole in swivel plate (Item 2) with
the centerline of the damper shaft. Slide the assembly
onto the damper shaft until the four mounting feet
of the swivel bracket (Item 1) are in contact with the
duct.
3) Attach swivel brackets (Item 1) to duct using
fasteners supplied by the installer. Maintain center
alignment and adjustment of swivel plate (Item 2) so
that the face of the bracket is perpendicular with the
damper shaft.
4) Tighten the nuts and bolts (Items 3 & 4) to lock swivel
bracket (Item 1) to swivel plate (Item 2).
1
2
3
4
Item Number Description Qty
1 Swivel Bracket 2
2 Swivel Plate 1
3
1
⁄4-20 Spinlock Nut 4
4
1
⁄4-20 Spinlock Bolt 4
®
• 470998 Ext Pin Kit and Man Quad Kit for VCDRM
Installation Instructions for Manual
Quadrant Kit
1) Please OPEN decal over SHUT stamp and CLOSED
decal (Item 7) over OPEN stamp on the manual
quadrant (Item 5).
2) Attach manual quadrant (Item 5) to swivel plate
(Item 2) using #10 x 1/2 in. HWH TEK screws (Item 6).
3) Assemble loosely swivel brackets (Item 1) onto the
swivel plate (Item 2) with nuts and bolts (Items 3 & 4).
4) Line up centerline of hole in swivel plate (Item 2) with
the centerline of the damper shaft. Slide the assembly
onto the damper shaft until the four mounting feet of
swivel bracket (Item 1) are in contact with the duct.
5) Attach swivel brackets (Item 1) to duct using
fasteners supplied by installer. Maintain center
alignment and adjustment of swivel plate (Item 2) so
that the face of the bracket is perpendicular with the
damper shaft.
6) Tighten nuts and bolts (Items 3 & 4) to lock swivel
bracket (Item 1) to swivel plate (Item 2).
7) Place quadrant lever in open position and damper
blades in full open position.
8) Tighten bolt on manual quadrant (Item 5) to secure it
to the damper shaft.
9) Adjust damper open/closed position to desired
setting.
10) Tighten manual quadrant with wing nut.
Item Number Description Qty
1 Swivel Bracket 2
2 Swivel Plate 1
3
1
⁄4-20 Spinlock Nut 4
4
1
⁄4-20 Spinlock Bolt 4
5
1/2 in. dia. Manual
Quadrant
1
6
#10 x 1/2 in. HWH TEK
ZP
2
7
OPEN and CLOSED
decals
1
• 470998 Ext Pin Kit & Man. Quad Kit for VCDRM Rev 2, November 2016 Copyright 2016 © Greenheck Fan Corporation
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in
the Library under Warranties.
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
®
  • Page 1 1
  • Page 2 2

Greenheck 470998 Extension Pin Kit & Manual Quadrant kit for VCDRM Operating instructions

Greenheck
Brand
Greenheck
Model
470998 Extension Pin Kit & Manual Quadrant kit for VCDRM
Type
Operating instructions

Greenheck 470998 Extension Pin Kit & Manual Quadrant kit for VCDRM is designed to make it easier to adjust the position of a damper in a duct system. The extension pin kit includes a swivel bracket and a swivel plate that can be attached to the damper shaft. The manual quadrant kit includes a manual quadrant that can be attached to the swivel plate. This allows the user to manually adjust the position of the damper by turning the quadrant. The kit also includes decals that can be used to indicate the open and closed positions of the damper.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents