2. iCR
  3. iCR 3600

iCR iCR 3600 Quick Start

  • Hello, I'm your chat assistant. I've reviewed the iCR 3600 Computer Mounting Instructions. This document contains step-by-step visual instructions for mounting a computer to the iCR 3600 unit, detailing the use of specific screws and washers for secure attachment. I’m ready to answer any questions you have regarding the mounting process.
  • What type of screws are used to attach the Back Computer Mounting bracket to the Computer Mounting Bracket?
    How many screws are used to fasten the computer mounting bracket to the CR unit?
    What size screw and washer is used to fasten the computer to the mounting bracket?
Quick Start: iCR 3600 Computer Mounting Instructions
1.
Attach the Back Computer Mounting bracket to the Computer Mounting Bracket using four (4)
6-32 x 1
4” flathead screws (Figure 1).
Figure 1
2. Align the computer mounting bracket on the back of the cassette tray.
3.
Once the screw holes are aligned, fasten the computer mounting bracket to the CR unit using four
(4) 6-32 x 3
8” truss head screws (Figure 2).
Figure 2
1 of 3 Document # F-141 Rev C January 26, 2010
Quick Start: iCR 3600 Computer Mounting Instructions
4. Carefully slide the computer into the computer mounting bracket (Figure 3).
NOTE: For easy access to the CD-ROM drive, make sure the drive opens towards the outside of
the unit.
Figure 3
5.
Fasten the computer to the mounting bracket using one (1) 8-32 x
3
8
” truss head screws and #10 flat
washer. The computer’s security tab should be in between the washer and the mounting bracket
(Figure 4).
2 of 3 Document # F-141 Rev C January 26, 2010
Quick Start: iCR 3600 Computer Mounting Instructions
Figure 4
3 of 3 Document # F-141 Rev C January 26, 2010
/