sks VELODETECT+ User manual

GERMANY

B 2x

C 2x

A 1x

E 2x

D 2x

F 1x

G 1x

MANUAL › VELODETECT+ › 12002

ALLROAD ROAD MOUNTAIN

EN . VELODETECT+

With the VELO/DETECT+, an Apple AirTag can be inconspicuously integrated on the bike frame. Well concealed, for example under the drinking

bottle holder, the ﬂat mounting is hardly noticeable. Simply insert the AirTag, close the two halves of the housing and screw it to the bottle holder

mount.

Scope of delivery 1. Glue rubber

3a. Screw connection with bottle holder

3b. Screw connection without bottle holder

2. Apple AirTag insert

Preparing the VELODETECT+:

a. Attach the required accessory

adapters (C) to the wings of

the VELODETECT+ (A).

b. Route the short hook and loop

fasteners (B) through the opening on

the VELODETECT+ with the hook and

loop side facing the bike.

Secure the accessory with the short

hook and loop fasteners (B) and

shorten all protruding hook

and loop fasteners.

NOTE! Mounting possible with

or without bottle holder.

NOTE! Apple AirTag not included

in delivery.