Electrolux 728423 (RH14RD4F) Datasheet
- Category
- Dishwashers
- Type
- Datasheet
This manual is also suitable for
Identification:
Technical Bulletin:
Date:
Issuer:
Factory:
D04
CGX2008-07 (page 1 of 3),
14 March 2008
R. Sartor (DWS Customer Support)
CGX – Dishwashing – Pordenone (I)
Subject
Control Panels in HT high capacity
Model
Hood Type high capacity (LS10EA-14EA / WT65E), all brands, Franstal
excluded.
Reason
Introduction of more visible brand in all models and “Wash Safe Control” in
Electrolux standard models.
From serial number 81100001 we have introduced new control panels and
new frontal panels (without metal badge) as follow:
Action in
Factory
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380636
++39 0434 385646
Share more of our thinking at www.electrolux.com
Technical Bulletin (Control Panels).doc
Brand Description Model
OLD
Spare part code
NEW
Spare part code
With water softener built-in
0L1136
0L1684
Upper half
Without water softener built-in
0L1134
Frontal
panel
Thai WT65
0L1135
0L1685
Round
corners
Manual WT65
0L1137
0L1673
with Wash Safe Control logo
Automatic WT65
0L1138
0L1672
with Wash Safe Control logo
WT65 Medical line
0L1139
0L1678
with Medical line logo
Electrolux
Membrane
Thai WT65
(membrane like WT55)
0L0087
0L1674
without Wash Safe Control logo
With water softener built-in
0L0808
0L1684
Upper half
Without water softener built-in
0L1133
Frontal
panel
Thai LS14
0L1135
0L1685
Round
corners
LS10EA
0L0008
0L1677
with Active logo
Manual LS14EA
0L0001
0L1676
with Active logo
Automatic LS14EA
0L0005
0L1675
with Active logo
Zanussi
Membrane
Thai LS14
(membrane like LS9)
0L0085
0L1680
without Active logo
Share more of our thinking at www.electrolux.com
2
Brand Description Model
OLD
Spare part code
NEW
Spare part code
With water softener built-in
0L0809
0L1684
Upper half
Frontal
panel
Without water softener built-in
049842
0L1683
Square
corners
HT1000
049607
0L1682
Alpeninox
Membrane
HT1200
049609
0L1681
With water softener built-in
0L1352
0L1684
Upper half
Frontal
panel
Without water softener built-in
049843
0L1683
Square
corners
Ecotemp
Membrane All ET12
049610
0L1679
Action in
Field
“New” membranes are not interchangeable towards “old” ones.
The “WASH SAFE CONTROL” for Electrolux models works like the “ACTIVE”
system for Zanussi models:
• Green led = correct rinse temperature
• Red led = low rinse temperature
While the rinse pump guarantees the correct rinse pressure.
Of course this means the main board in standard Electrolux models (Thai
WT65 excluded)
must be set like the main board in Zanussi models with
Active system (atmospheric boiler), i.e. with the parameter
User Interface
model UI = 9 instead of UI = 8 (see CFG parameters).
How standard Electrolux models and standard Zanussi models look like from
serial number 81100001:
Hood Type with water softener
built-in may still have old
frontal panel and old
membrane after serial number
811000001 because of
different clearance stock
Share more of our thinking at www.electrolux.com
3
-
1
-
2
-
3
Electrolux 728423 (RH14RD4F) Datasheet
- Category
- Dishwashers
- Type
- Datasheet
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Electrolux FCG101 Datasheet
-
-
-
-
-
-
-
-
-