Kallista P21661-00-AG Installation guide

Kallista
Brand
Kallista
Model
P21661-00-AG
Type
Installation guide

This manual is also suitable for

Kallista P21661-00-AG is a wall supply elbow for handshowers. It is made of solid brass and has a polished chrome finish. The elbow has a 1/2-inch NPT male inlet and a 1/2-inch NPT female outlet. It is designed to be installed on a finished wall and can be used with any standard handshower hose.

The Kallista P21661-00-AG is a durable and reliable product that is easy to install. It is a great choice for anyone who is looking for a high-quality wall supply elbow for their handshower.

Here are some of the features and benefits of the Kallista P21661-00-AG:

  • Made of solid brass for durability

Kallista P21661-00-AG is a wall supply elbow for handshowers. It is made of solid brass and has a polished chrome finish. The elbow has a 1/2-inch NPT male inlet and a 1/2-inch NPT female outlet. It is designed to be installed on a finished wall and can be used with any standard handshower hose.

The Kallista P21661-00-AG is a durable and reliable product that is easy to install. It is a great choice for anyone who is looking for a high-quality wall supply elbow for their handshower.

Here are some of the features and benefits of the Kallista P21661-00-AG:

  • Made of solid brass for durability
INSTALLATION INSTRUCTIONS
Wall Supply Elbow
1213840-2-B
1 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
©2013 KALLISTA
P21661
INSTALLATION INSTRUCTIONS
Wall Supply Elbow
1213840-2-B
2 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
ThANk YOU FOR ChOOSINg kALLISTA
We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual
before you install your KALLISTA product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BeFORe YOU BegIN
NOTe: Plumbing codes may require a vacuum breaker be installed in-line to handshowers. Please consult with
local plumbing codes.
Carefully plan the location of the wall supply elbow to avoid the possibility of the handshower hose
interfering with the operation of any faucets and/or drains, etc.
Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the main water supply.
Inspect the supply piping for damage. Replace as necessary.
KALLISTA reserves the right to make revisions in the design of products without notice, as specied in the
Price Book.
TOOLS ANd MATeRIALS
Thread
Sealant
Pencil Clear Silicone
Sealant
Strap
Wrench
Tape
Measure
INSTALLATION INSTRUCTIONS
Wall Supply Elbow
1213840-2-B
3 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
1. INSTALL The PIPe NIPPLe
Apply sealant tape.
1/2" Pipe Nipple
1/4" (6 mm)
Finished Wall
Install a 1/2″ NPT pipe nipple that extends 1/4″ (6 mm) from the nished wall when fully tightened.
Run water through the system to ush out dirt and debris.
Apply sealant tape around the exposed threads of the pipe nipple.
2. INSTALL The SUPPLY eLBOw
1/2" Pipe Nipple
Supply Elbow
Outlet
Thread the supply elbow onto the 1/2″ pipe nipple.
Using a clean strap wrench, tighten the supply elbow ush to the wall with the outlet oriented down.
Apply a bead of clear silicone sealant around the perimeter of the supply elbow.
Turn on the water and allow water to ow through the supply elbow.
Check connection for leaks. Repair as needed.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kallista P21661-00-AG Installation guide

Kallista
Brand
Kallista
Model
P21661-00-AG
Type
Installation guide
This manual is also suitable for

Kallista P21661-00-AG is a wall supply elbow for handshowers. It is made of solid brass and has a polished chrome finish. The elbow has a 1/2-inch NPT male inlet and a 1/2-inch NPT female outlet. It is designed to be installed on a finished wall and can be used with any standard handshower hose.

The Kallista P21661-00-AG is a durable and reliable product that is easy to install. It is a great choice for anyone who is looking for a high-quality wall supply elbow for their handshower.

Here are some of the features and benefits of the Kallista P21661-00-AG:

  • Made of solid brass for durability
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents