Gigabyte LGA3647 User manual

R161-340

Dual LGA3647 sockets motherboard for Intel

®

Scalable Family Processors

Service Guide

Rev. 1.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or pub-

lished in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:



For detailed product information, carefully read the User's Manual.

For More Information

For related product specications, the latest rmware and software, and related information, please visit

our website at:

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal:

http://reseller.b2b.gigabyte.com

For further information & technical assistance, please contact your GIGABYTE sales representative.

You may also message GIGABYTE server directly by email, Facebook or twitter

Email: server[email protected]

Facebook: https://www.facebook.com/gigabyteserver

Conventions

The following conventions are used in this user's guide:

NOTE!

Gives bits and pieces of additional

information related to the current topic.

CAUTION!

Gives precautionary measures to

avoid possible hardware or software problems.

WARNING!

Alerts you to any damage that might

result from doing or not doing specic actions.

Server Warnings and Cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

• Unplug the power cord from the power supply to disconnect power to the equipment.

• Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING!

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal

system components to cool before touching them.

WARNING!

This server is equipped with high speed fans. Keep away from hazardous moving fan

blades during servicing.

CAUTION!

• Do not operate the server for long periods with the access panel open or removed. Operat-

ing the server in this manner results in improper airow and improper cooling that can lead to

thermal damage.

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer’s instructions.

Electrostatic Discharge (ESD)

CAUTION!

ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU

PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,

PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT-

TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER

WHEN HANDLING PARTS.

Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by

their edges without any component and pin touching. After removing a board from its protective

wrapper or from the system, place the board component side up on a grounded, static free sur-

face. Use a conductive foam pad if available but not the board wrapper. Do not slide board over

any surface.

System power on/off: To remove power from system, you must remove the system from rack.

Make sure the system is removed from the rack before opening the chassis, adding, or removing

any non hot-plug components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present

on power, telephone, and communication cables. Turn off the system and discon-nect the cables

attached to the system before servicing it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage drives, boards, and

other parts. We recommend that you perform all procedures in this chapter only at an ESD work-

station. If one is not available, provide some ESD protection by wearing an antistatic wrist strap

attached to chassis ground (any unpainted metal surface on the server) when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely sensi-tive to

electrostatic discharge (ESD). Hold boards only by their edges. After removing a board from its

protective wrapper or from the system, place the board component side up on a grounded, static

free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide

board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over

two jumper pins. Some jumpers have a small tab on top that can be gripped with n-gertips or

with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when us-

ing needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the

pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the jumper,

causing intermittent problems with the function con-trolled by that jumper. Take care to grip with,

but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the board may

bend or break.

CAUTION!

Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-

teries according to the manufacturer’s instructions.

- 7 -

Table of Contents

Chapter 1 Hardware Installation ...................................................................................10

1-1 Installation Precautions .................................................................................. 10

1-2 Product Specications .................................................................................... 11

1-3 System Block Diagram ................................................................................... 14

Chapter 2 System Appearance ..................................................................................... 15

2-1 Front View ...................................................................................................... 15

2-2 Rear View ....................................................................................................... 15

2-3 Front Panel LED and Buttons ........................................................................ 16

2-4 Rear System LAN LEDs ................................................................................. 17

2-5 Hard Disk Drive LEDs .................................................................................... 18

2-6 Power Supply Unit LED .................................................................................. 19

Chapter 3 System Hardware Installation ......................................................................21

3-1 Removing and Installing the Chassis Cover .................................................. 22

3-2 Removing and Installing the Fan Duct ........................................................... 23

3-3 Removing and Installing the CPU and Heat Sink ........................................... 24

3-4 Removing and Installing Memory ................................................................... 26

3-4-1 Six-Channel Memory Conguration ........................................................................26

3-4-2 Removing and Installing a Memory Module ...........................................................27

3-4-3 DIMM Population Table ..........................................................................................27

3-5 Removing and Installing the PCI Expansion Card ......................................... 28

3-6 Removing and Installing the Hard Disk Drive ................................................. 29

3-7 Installing and Removing an M.2 Solid State Drive ......................................... 30

3-8 Replacing the Fan Assembly .......................................................................... 31

3-9 Removing and Installing the Power Supply .................................................... 32

3-10 Cable Routing ................................................................................................ 33

Chapter 4 Motherboard Components ...........................................................................35

4-1 Motherboard Components ............................................................................. 35

4-2 Jumper Settings ............................................................................................. 37

Chapter 5 BIOS Setup ..................................................................................................39

5-1 The Main Menu .............................................................................................. 41

5-2 Advanced Menu ............................................................................................. 44

5-2-1 Trusted Computing .................................................................................................45

5-2-2 Serial Port Console Redirection .............................................................................46

- 8 -

5-2-3 SIO Conguration ...................................................................................................49

5-2-4 PCI Subsystem Settings .........................................................................................50

5-2-5 USB Conguration ..................................................................................................52

5-2-6 Post Report Conguration ......................................................................................53

5-2-7 NVMe Conguration ...............................................................................................54

5-2-8 Chipset Conguration .............................................................................................55

5-2-9 Network Stack Conguration ..................................................................................56

5-2-10 iSCSI Conguration ................................................................................................57

5-2-11 Intel(R) I210 Gigabit Network Connection ..............................................................58

5-2-12 VLAN Conguration ................................................................................................60

5-2-13 Driver Health ...........................................................................................................62

5-3 Chipset Setup Menu ....................................................................................... 63

5-3-1 Processor Conguration .........................................................................................64

5-3-2 Common RefCode Conguration ...........................................................................67

5-3-3 UPI Conguration ...................................................................................................68

5-3-4 Memory Conguration ............................................................................................69

5-3-5 IIO Conguration ....................................................................................................71

5-3-6 Advanced Power Management Conguration ........................................................73

5-3-7 PCH Conguration .................................................................................................76

5-3-8 Miscellaneous Conguration ..................................................................................78

5-3-9 Server ME Conguration ........................................................................................79

5-3-10 Runtime Error Logging ...........................................................................................80

5-3-11 Power Policy ...........................................................................................................82

5-4 Server Management Menu ............................................................................. 84

5-4-1 System Event Log ..................................................................................................86

5-4-2 View FRU Information ............................................................................................87

5-4-3 BMC VLAN Conguration .......................................................................................88

5-4-4 BMC Network Conguration ...................................................................................89

5-4-5 IPv6 BMC Network Conguration ...........................................................................90

5-5 Security Menu ................................................................................................ 91

5-5-1 Secure Boot ...........................................................................................................92

5-6 Boot Menu ...................................................................................................... 94

5-6-1 UEFI NETWORK Drive BBS Priorities ..................................................................96

5-6-2 UEFI Application Boot Priorities

................................................................... 97

5-7 Save & Exit Menu ........................................................................................... 98

5-8 BIOS POST Codes ...................................................................................... 100

5-8-1 AMI Standard - PEI ...............................................................................................100

5-8-2 AMI Standard - DXE .............................................................................................100

5-8-3 AMI Standard - ERROR .......................................................................................102

5-8-4 Intel UPI POST Codes ..........................................................................................103

5-8-5 Intel UPI Error Codes ...........................................................................................103

5-8-6 Intel MRC POST Codes .......................................................................................104

- 9 -

5-8-7 Intel MRC Error Codes .........................................................................................104

5-8-8 Intel PM POST Codes ..........................................................................................105

5-8-9 Intel PM POST Codes ..........................................................................................105

5-9 BIOS POST Beep code (AMI standard) ....................................................... 106

5-9-1 PEI Beep Codes ...................................................................................................106

5-9-2 DXE Beep Codes .................................................................................................106

5-10 BIOS Recovery Instruction ........................................................................... 107

- 10 - Hardware Installation

1-1 Installation Precautions

The motherboard/system contain numerous delicate electronic circuits and components which

can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully

read the service guide and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap, keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

Hardware Installation - 11 -

1-2 Product Specications

Socket

CPU  2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors

 Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon®

Silver Processor and Intel® Xeon® Bronze Processor

 CPU TDP up to 125W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be

unavailable

Socket

Socket  2 x LGA 3647

 Socket P

Socket

Chipset

 Intel® C621 Express Chipset

Socket

Memory  16 x DIMM slots

 DDR4 memory supported only

 6-channel memory architecture

 RDIMM modules up to 64GB supported

 LRDIMM modules up to 128GB supported

 1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz

NOTE: 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only

Socket

LAN  2 x 1Gb/s LAN ports (Intel® I210-AT)

 1 x 10/100/1000 management LAN

 * 2 x 10Gb/s LAN ports (Intel® X557) as an option

 * 2 x 25Gb/s SFP28 ports (Mellanox® ConnectX-4 Lx) as an option

Socket

Expansion Slot Riser Card CRS1014:

 - 1 x PCIe x16 slots (Gen3 x16), Full height half-length

Riser Card CRS1015:

 - 1 x PCIe x16 slot (Gen3 x16), Full height half-length

2 x M.2 slots:

 - M-key

 - PCIe Gen3 x4

 - Supports NGFF-2260/2280 cards

Socket

Video  Integrated in Aspeed® AST2500

 2D Video Graphic Adapter with PCIe bus interface

 1920x1200@60Hz 32bpp, DDR4 SDRAM

Socket

Storage  4 x 3.5" SATA/SAS hot-swappable HDD/SSD bays

 2.5" HDD/SSD supported

 SAS card is required for SAS devices support

 1 x 2.5" internal xed SATA HDD/SSD bay

 2 x 2.5" internal xed SATA HDD/SSD bays as an option

Socket

SATA  2 x 7-pin SATA III 6Gb/s with SATA DOM supported

 By using pin_8 or external cable for power function

- 12 - Hardware Installation

Socket

SAS  Supported via add-on SAS Card

Socket

Support RAID

Function

 Intel® SATA RAID 0/1/10/5

Socket

Internal

Connectors

 2 x Power supply connectors

 5 x SlimSAS connectors

 2 x SATA 7-pin connectors

 2 x CPU fan headers

 1 x USB 3.0 header

 1 x TPM header

 1 x VROC connector

 1 x Front panel header

 1 x HDD back plane board header

 1 x IPMB connector

 1 x Clear CMOS jumper

 1 x BIOS recovery jumper

Socket

Front Panel

LED/Buttons

 2 x USB 3.0

 1 x Power button with LED

 1 x ID button with LED

 1 x Reset button

 1 x NMI button

 1 x System status LED

 1 x HDD activity LED

 2 x LAN activity LEDs

Socket

Rear Panel I/O  2 x USB 3.0

 1 x VGA

 1 x COM (as an option)

 2 x RJ45

 1 x MLAN

 1 x ID button with LED

Socket

Backplane I/O  4 x SATA/SAS ports

 Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

Socket

TPM  1 x TPM header with SPI interface

 Optional TPM2.0 kit: CTM010

Hardware Installation - 13 -

Socket

System

Management

 Aspeed® AST2500 management controller

 Avocent® MergePoint IPMI 2.0 web interface:

 Network settings

 Network security settings

 Hardware information

 Users control

 Services settings

 IPMI settings

 Sessions control

 LDAP settings

 Power control

 Fan proles

 Voltages, fans and temperatures monitoring

 System event log

 Events management (platform events, trap settings, email settings)

 Serial Over LAN

 vKVM & vMedia (HTML5)

Socket

Power Supply  1 x 550W single PSUs

 80 PLUS Platinum

 AC Input:

 - 100-240V~/ 8-4A, 50-60Hz

 DC Input:

 - 240Vdc/ 2.75A

 DC Output:

 - 550W

 +12V/ 44A

 +12Vsb/ 2.1A

 * Enable to upgrade to 2 x 550W redundant PSU (as an option)

Socket

Environment

Ambient

Temperature

Relative

Humidity

 Operating temperature: 10°C to 35°C

 Non-operating temperature: -40°C to 60°C

 Operating humidity: 8-80% (non-condensing)

 Non-operating humidity: 20%-95% (non-condensing)

Socket

System

Dimension

 1U

 438mm (W) x 43.5mm (H) x 730mm (D)

* We reserves the right to make any changes to the product specications and product-related information without

prior notice.

- 14 - Hardware Installation

1-3 System Block Diagram

Uplink x8

PCIe3.0 x1

LPC

6 Channels

DDR4

6 Channels

DDR4

2933 MHz (1DPC)

2666 MHz (2DCP)

8 x DIMM slots

2933 MHz (1DPC)

2666 MHz (2DCP)

8 x DIMM slots

DMI3 x 4

UPI 10.4GT/s

2A~2D

PCIe3.0

x

8

PCIe3.0

x16

PCIe3.0

x4

PCIe3.0

x

16

PCIe3.0

x

16

MLAN

2 x USB 2.0

Intel

I210

Intel

I210

Intel

X557-AT2

Front 2x USB 3.0

Rear 2 x USB 3.0

COM (Header)

VGA

PCH

Intel C621

Lewisburg

SW_RAID

For VROC

2 x SSATAIII

(SSATA DOM)

ASPEED

AST2500

10/100/1G

PHY(1ch)

MAC

BMC

PCIe x16

CRS1014

PCIe x16

CRS1015

PCIe x16

CNVP140 (option)

Skylake-SP

LGA 3647

Socket P0

CPU0

Skylake-SP

LGA 3647

Socket P0

CPU1

2 x 1G LAN

TPM

2 x 10G LAN

(option)

8 x SATAIII

3 x SlimLine SAS

2 x U.2

2 x M.2

2 x SSATAIII

4 x SSATAIII

SPI TPM

2 x 10G SFP+

2 x 25G SFP28

(Option)

Mellanox

SFP+/SFP28

PCIe3.0

x4

- 15 - System Appearance

1 2

Chapter 2 System Appearance

2-1 Front View

No. Description

1.

Front Panel LEDs and buttons

2. Front USB 3.0 ports

• Refer to Chapter

2-3 Front Panel LED

and Buttons for a detailed description of the function

of the LEDs.

2-2 Rear View

No. Description

1. VGA Port

2. 1Gbe LAN Port x 2

3. USB 3.0 Port x 2

4. 10/100/1000 Server management LAN port

5. ID Button

6. PCIe Card Bay #1

7. PCIe Card Bay #2

• Refer to Chapter

2-4 Rear System LAN LEDs

for a detailed description of the function of

the LEDs.

HDD1 HDD2 HDD3 HDD4

1 2 3 4

7

6

5

System Appearance - 16 -

2-3 Front Panel LED and Buttons

L2 SYS

ID

L1

RST

NMI

87654321

No. Name Color Status Description

1.

NMI button

Press the button server generates a NMI to the processor

if the multiple-bit ECC errors occur, which effectively halt

the server.

2.

Reset Button Press the button to reset the system.

3/4.

LAN 1/2

Active/Link

LEDs

Green

Solid

On

Link between system and network or no access.

Green Blink Data trasmission or receiving is occuring

N/A Off No data transmission or receiving is occuring

5.

HDD Status

LED

Green

On HDD locate

Blink HDD access

Amber On HDD fault

Green/

Amber

Blink HDD rebuilding

N/A Off No HDD access or no HDD fault.

6.

System

Status LED

Green

Solid

On

System is operating normally.

Amber

Solid

On

Critical condition, may indicate:

System fan failure

System temperature

Blink

Non-critical condition, may indicate:

Redundant power module failure

Temperature and voltage issue

Chassis intrusion

N/A Off

System is not ready, may indicate:

POST error

NMI error

Processor or terminator missing

7.

ID Button Press the button to activate system identication

8.

Power button

with LED

Green On System is powered on

Green Blink System is in ACPI S1 state (sleep mode)

N/A Off

• System is not powered on or in ACPI S5 state

(power off)

• System is in ACPI S4 state (hibernate mode)

System Appearance - 17 -

2-4 Rear System LAN LEDs

No. Name Color Status Description

1.

1GbE

Speed LED

Yellow On 1 Gbps data rate

Green On 100 Mbps data rate

N/A Off 10 Mbps data rate

2.

1GbE

Link/

Activity

LED

Green

On Link between system and

network or no access

Blink Data transmission or receiving is occurring

N/A Off No data transmission or

receiving is occurring

1 2 1 221

- 18 - System Appearance

2-5 Hard Disk Drive LEDs

/('

/('

RAID SKU

HDD Fault

Locate

HDD

Access

HDD Present

(No Access)

No RAID configuration

(via HBA, PCH)

RAID configuration

(via HW RAID Card or

SW RAID Card)

Disk LED

(LED on

Back Panel)

Amber

Removed HDD Slot

(LED on Back Panel)

Disk LED

Removed HDD Slot

Green

ON(*1)

OFF

BLINK (*2)

OFF

ON

OFF

ON(*1)

OFF

ON

OFF

ON

(Low Speed: 2 Hz)

(*3)

OFF

--

Green

Amber

Green

ON(*1) OFF --

--

Green

OFF

--

Amber

OFF

Rebuilding

OFF

LED1

LED 2

HDD Present No HDD

Green

ON

OFF

NOTE:

*1: Depends on HBA/Utility Spec.

*2: Blink cycle depends on HDD's activity signal.

*3: If HDD is pulled out during rebuilding, the disk status of this HDD is regarded as faulty.

System Appearance - 19 -

2-6 Power Supply Unit LED

PSU LED

State Description

Off No AC power to all power supplies

GREEN Output ON and OK

1Hz Blink GREEN AC present/ only standby on/ Cold redundant mode

2Hz Blink GREEN Power supply F.W updateing mode

Green BLINKING

0.25 Sec./On

0.25 Sec./Off

2Hz

PSU Sleep Mode (cold Redundant/Ofine mode)

Amber

AC cord unplugged or AC power lost; with a second

power supply in parallel still with AC input power

Power supply critical event causing shut down:

failure, OCP, OVP, Fan Fail, UVP

1Hz Blink AMBER

Power supply warning events where the

power supply continues to operate:

high temp, high power, high current, slow fan

System Appearance - 20 -

This page intentionally left blank

Page is loading ...

Gigabyte LGA3647 User manual

This manual is also suitable for

Gigabyte LGA3647 User manual

Related papers

Other documents