Whirlpool WME1899 DFC W Program Chart

Brand: Whirlpool

Model: WME1899 DFC W

Type: Program Chart

This manual is also suitable for

Whirlpool WME1899 DFC W is a modern refrigerator with advanced features for optimal food storage and preservation. It offers precise temperature control, allowing you to adjust the inside temperature between 3°C and 7°C to suit your needs. With its "6th Sense" technology, the refrigerator can intelligently sense and adapt to temperature changes, ensuring ideal conditions for food freshness. Additionally, the "Vacation" mode helps save energy during prolonged absences by maintaining a stable temperature while minimizing energy consumption.

1. Lighting

2. Fan with filter (if provided); for the filter, see

the instructions enclosed with it

3. Multi-flow air circulation system

4. Shelves / Shelf zone

5. "Zero Degrees" special compartment

(if available)

6. Rating plate (at the side of crisper)

7. Crisper

8. Control panel

9. Door trays

10. Removable bottle holder (if provided)

11. Bottle holders

Notes: The number of shelves and shape of

accessories may vary, depending on the model.

All the shelves and door trays are removable.

Attention: Do not place the refrigerator

accessories in a dishwasher.

GB UKRROBGRUSHSKCZPL

PRODUCT SHEET

UKRROBGRUSHSKCZPLGB

Refrigerator inside temperature adjustment

The appliance is normally factory-set for operation at the recommended temperature of 5°C.

The inside temperature setting can be adjusted between 3°C and 7°C, proceeding as follows:

• Press the inside temperature adjustment button D. The storage temperature can be changed by 1°C

with each press of the button: the value flashes cyclically between 3°C and 7°C.

Vacation mode

The vacation mode function allows a reduction in electric energy consumption in case of prolonged

absence.

The function is activated by pressing the button I for 3 seconds; the LED E lights up and stays on. The

Vacation function is not compatible with the Fast Cool function. To restore normal functioning of the

refrigerator compartment, repeat the operation. After activating the function, remove perishable food

from the refrigerator compartment and keep the door closed, since the refrigerator maintains an adequate

temperature to prevent the formation of odors.

Note: The refrigerator can operate at ambient temperatures between +10°C and +38°C and optimum

performance is obtained at temperatures between +16°C and +38°C.

The ambient air temperature, the frequency of door opening and the position of the appliance

can affect the temperatures inside the refrigerator. Take these factors into consideration when

setting the thermostat knob.

For the complete shutdown of the product, unplug it.

A. 6th Sense. "6th Sense" activation indicator (see

enclosed instructions)

B. On/Standby. Press for at least 3 seconds to

put the product in standby mode. Press the

icon once to reactivate the product.

C. Temperature. Set temperature indicator.

D. Temperature. Temperature setting button

E. Vacation mode. Vacation function on indicator.

(see the specific section)

F. Key Lock. Press for at least 3 seconds to

activate/deactivate the Key Lock. When

activated, pressing the other icons activates an

audible signal.

G. Door open. Door open indicator.

H. Stop alarm. Press in case of alarm.

I. Fast Cool/Vacation mode. Press once to

activate the Fast Cool mode. The function

switches off automatically after about 6 hours.

Press for at least 3 seconds to activate the

Vacation Mode.

CONTROL PANEL

ABCDE

FGH I

UKRROBGRUSHSKCZPLGB

The fan ensures a uniform temperature inside the refrigerator compartment, for optimum food storage.

To activate the fan, press the corresponding button (2a). It is advisable to switch the fan on when the

ambient temperature exceeds 27 - 28°C, or if water droplets form on the glass shelves, or else in very

humid conditions.

Note: Do not obstruct the front air inlet with food (2b).

The fan will start ONLY when the compressor is working.

Remember to switch off the fan when the ambient temperature decreases.

FAN WITH BUTTON (if available)

ALARM SIGNALING

Signal Cause Cure

Door open alarm The audible alarm is

activated and the light G

remains comes on.

The door has remained

open for more than 2

minutes

Close the door

Malfunction The message "F" flashes

on the display C

Product malfunction Contact the After-Sales

Service

5019 308 01058 Printed in Italy 03/12 - Whirlpool

This optional function can be used to save energy.

To activate the Eco mode, press the buttons F and I together for 3 seconds until an audible signal sounds.

Two seconds after activation of the Eco mode, the display goes off, except the "6th Sense" icon (and the

audible signal is deactivated, if on).

To adjust the temperature or use other functions, it is necessary to activate the display by pressing any

button.

After about 15 seconds without performing any action, the display goes off again and only the "6th Sense"

icon remains visible.

To deactivate this function, press the buttons F and I together for 3 seconds until an audible signal sounds.

The normal display is restored.

The Eco mode is automatically disabled after a power failure or a fault alarm. Remember that this function

does not disconnect the appliance from the power supply.

ECO MODE

Whirlpool WME1899 DFC W Program Chart

Brand: Whirlpool

Model: WME1899 DFC W

Type: Program Chart

This manual is also suitable for

Download PDF

report

Whirlpool WME1899 DFC W Program Chart

This manual is also suitable for

Whirlpool WME1899 DFC W Program Chart

Related papers

Other documents