Bauknecht KR 365 A2+ FRESH PT Program Chart

Brand: Bauknecht

Model: KR 365 A2+ FRESH PT

Type: Program Chart

This manual is also suitable for

Bauknecht KR 365 A2+ FRESH PT offers precise temperature control within the range of 3 to 7°C, ensuring optimal food preservation. Activate the Fast Cool mode for rapid cooling, ideal for quickly chilling drinks or preserving the freshness of food after grocery shopping. Utilize the energy-saving Vacation mode for extended absences, maintaining a suitable temperature to prevent odor formation while minimizing energy consumption.

1. Lighting

2. Fan with filter (if provided); for the filter, see

the instructions enclosed with it

3. Multi-flow air circulation system

4. Shelves / Shelf zone

5. "Zero Degrees" special compartment

(if available)

6. Rating plate (at the side of crisper)

7. Crisper

8. Control panel

9. Door trays

10. Removable bottle holder (if provided)

11. Bottle holders

Notes: The number of shelves and shape of

accessories may vary, depending on the model.

All the shelves and door trays are removable.

Attention: Do not place the refrigerator

accessories in a dishwasher.

IGB FINDKNSGRPENLFD

PRODUCT SHEET

FINDKNSGRIPENLFGBD

Refrigerator inside temperature adjustment

The appliance is normally factory-set for operation at the recommended temperature of 5°C.

The inside temperature setting can be adjusted between 3°C and 7°C, proceeding as follows:

• Press the inside temperature adjustment button D. The storage temperature can be changed by 1°C

with each press of the button: the value flashes cyclically between 3°C and 7°C.

Vacation mode

The vacation mode function allows a reduction in electric energy consumption in case of prolonged

absence.

The function is activated by pressing the button I for 3 seconds; the LED E lights up and stays on. The

Vacation function is not compatible with the Fast Cool function. To restore normal functioning of the

refrigerator compartment, repeat the operation. After activating the function, remove perishable food

from the refrigerator compartment and keep the door closed, since the refrigerator maintains an adequate

temperature to prevent the formation of odors

Note: The refrigerator can operate at ambient temperatures between +10°C and +38°C and optimum

performance is obtained at temperatures between +16°C and +38°C.

The ambient air temperature, the frequency of door opening and the position of the appliance

can affect the temperatures inside the refrigerator. Take these factors into consideration when

setting the thermostat knob.

For the complete shutdown of the product, unplug it

A. Green Intelligence. "Green Intelligence"

activation indicator (see enclosed instructions)

B. On/Standby. Press for at least 3 seconds to

put the product in standby mode. Press the

icon once to reactivate the product.

C. Temperature. Set temperature indicator.

D. Temperature. Temperature setting button

E. Vacation mode. Vacation function on indicator.

(see the specific section)

F. Key Lock. Press for at least 3 seconds to

activate/deactivate the Key Lock. When

activated, pressing the other icons activates an

audible signal.

G. Door open. Door open indicator.

H. Stop alarm. Press in case of alarm.

I. Fast Cool/Vacation mode. Press once to

activate the Fast Cool mode. The function

switches off automatically after about 6 hours.

Press for at least 3 seconds to activate the

Vacation Mode.

CONTROL PANEL

ABCDE

FGH I

FINDKNSGRIPENLFGBD

The fan ensures a uniform temperature inside the refrigerator compartment, for optimum food storage.

To activate the fan, press the corresponding button (2a). It is advisable to switch the fan on when the

ambient temperature exceeds 27 - 28°C, or if water droplets form on the glass shelves, or else in very

humid conditions.

Note: Do not obstruct the front air inlet with food (2b).

The fan will start ONLY when the compressor is working.

Remember to switch off the fan when the ambient temperature decreases.

FAN WITH BUTTON (if available)

ALARM SIGNALING

Signal Cause Cure

Door open alarm The audible alarm is

activated and the light G

remains comes on.

The door has remained

open for more than 2

minutes

Close the door

Malfunction The message "F" flashes

on the display C

Product malfunction Contact the After-Sales

Service

This optional function can be used to save energy. To activate the Eco mode, press the buttons F and I

together for 3 seconds until an audible signal sounds. Two seconds after activation of the Eco mode, the

display goes off, except the "Green Intelligence" icon (and the audible signal is deactivated, if on). To

adjust the temperature or use other functions, it is necessary to activate the display by pressing any

button. After about 15 seconds without performing any action, the display goes off again and only the

Green Intelligence icon remains visible. To deactivate this function, press the buttons F and I together for 3

seconds until an audible signal sounds. The normal display is restored. The Eco mode is automatically

disabled after a power failure or a fault alarm. Remember that this function does not disconnect the

appliance from the power supply

ECO MODE

5019 403 01035 Printed in Italy 03/12 - Bauknecht

Bauknecht KR 365 A2+ FRESH PT Program Chart

Brand: Bauknecht

Model: KR 365 A2+ FRESH PT

Type: Program Chart

This manual is also suitable for

Download PDF

report

Bauknecht KR 365 A2+ FRESH PT Program Chart

This manual is also suitable for

Bauknecht KR 365 A2+ FRESH PT Program Chart

Related papers

Other documents