Whirlpool WTC37662 A++NFCX Program Chart

Brand: Whirlpool

Model: WTC37662 A++NFCX

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

WTC 3746 A+NFCX

Whirlpool WTC37662 A++NFCX is a refrigerator-freezer that features HydroSense shelves to contain spills, a fan for improved temperature distribution, and a "Zero Degrees" box to keep food fresher for longer. The fan helps maintain even temperature and can be turned off when not needed. The "Zero Degrees" box can be activated to maintain a temperature of approximately 0°C, ideal for storing meat, fish, fruit, and winter vegetables. The refrigerator compartment temperature can be adjusted between +2°C and +8°C, while the freezer compartment temperature can be set between -16°C and -24°C.

A. Refrigerator Compartment

1. Filter in fan

2. LED's lighting

3. Shelves / Shelf area

4. Multi-flow cold air system

5. Cooler compartment (best for meat and fish) or

"Zero Degrees" box (to keep foods fresher for

longer)

6. Rating plate with commercial name

7. Fruits and vegetables crisper

7a. Crisper divider

8. Egg tray

9. Reversibility kit

10. Separator

11. Door trays

B. Freezer Compartment

12. Area for freezing ( with/without flap)

13. Area for storing frozen foods

14. Ice tray

15. Plastic shelf

16. The freezer door tray for pizza or other frozen

products with a short storage time (2** storage

compartment)

17. Door seals

C. Control panel and display

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (1)

- Antibacterial additives in the Crisper (7)

- Door seals are made of material able to inhibit bacterial

growth (17).

Notes:

- Depending on the model the number and type of

accessories may vary.

- In case it'll have a flap, please remember that to

maximize the storage volume it's suggested to remove

it.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on

the ambient temperature, frequency of opening the

doors, as well as location of the appliance. Temperature

setting must consider these factors.

- The appliance accessories are not suitable for washing

in dishwasher.

HYDROSENSE SHELVES

(depending of the model)

The special contour of the HydroSense shelves creates a

barrier that contain spills and simplifies cleanup,

preventing liquids from leaking onto shelves below.

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the

upper part of the condenser at the

rear of the appliance. When the

appliance is connected to the

power supply, the display lights up

and all the symbols appear on the

display for a few seconds. The

freezer factory setting -18°C appears and flashes, while the

refrigerator display shows a temperature of +5°C (factory-

set). While the appliance is working to reach the factory-set

temperature, an acoustic alarm sounds and temperature

symbol on the freezer display flashes (- -). This indicates that

the appliance has not yet reached the optimal temperature

for storage of foodstuffs. Press and hold the button "Reset"

until the acoustic alarm disables. The icon disappears when

the freezer compartment reaches a temperature below -

12°C, the display will show the temperature -18°C. After

being switched on, the refrigerator needs from 4 to 6 hours

to reach the correct temperature to store a typical volume

of food in the refrigerator compartment.

Important:

• If food is placed in the refrigerator before the appliance

has cooled completely, it may deteriorate.

• Turning the refrigerator and freezer controls to a colder

than recommended setting will not cool the

compartments any faster.

• A built-in exterior moisture control continuously guards

against moisture build-up on the front edges.

Do not be alarmed if these edges sometimes feel warm to

the touch.

The inside light switches on when the refrigerator door is

opened.

After 10 minutes of door opening the light switches off.

FAN WITH A BUTTON

The fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation of

stored food. By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the "Fresh

Control" / "ProFresh" function can work and also when

the ambient air temperature is over 27 ÷ 28°C or if you

perceive drops of water on the glass shelves or in the

severe humidity conditions.

Note

Do not obstruct the air intake area with food items.

When "Fresh Control" / "ProFresh" is disabled

remember to turn off the fan when there is a lower

ambient air temperature.

To turn off the fan press the button (1a).

If the appliance has the fan it can be equipped with the

antibacterial filter.

Remove it from the box (found in the crisper drawer

(item 7) and insert into the cover of fan (item 1b).

The replacement procedure is attached with the filter.

PRODUCT SHEET

UKR CAROBGRUSHSKCZPLIGB FINDKNSGRPENLFD

CONTROL PANEL DESCRIPTION

Buttons:

1. Options button

2. Setting temperature in freezer compartment button

3. Appliance On-Stand-by button

4. Confirmation button

5. Setting temperature in fridge compartment button

6. Reset button.

Switching on the appliance: Press & hold for 3 sec. the

"On-Stand-by" button to activate the product.

Switching off the appliance: Press & hold for 3 sec. the

"On-Stand-by" button again.

Adjusting the temperature: To change the temperature

inside the refrigerator or freezer compartment, press the

Freezer or Fridge button.

Displaying the refrigerator and freezer

compartment temperatures.

The temperature inside the refrigerator compartment can

be adjusted between +2°C and +8°C. In the same way,

the freezer compartment temperature can be adjusted

between -16°C and -24°C.

“ZERO DEGREES” BOX

(depending on the model)

The "Zero Degrees" box is specifically designed to

maintain a low temperature and a suitable humidity level,

in order to keep foods fresher for longer (e.g. meat, fish,

fruit and winter vegetables).

Activating and deactivating the box

The temperature inside the box, when active, is

approximately 0°.

The following factors are vital for the "Zero Degrees" box

to work properly:

- the refrigerator compartment must be switched on

- the temperature of the refrigerator compartment must

be between +2°C and +5°C

- the box must be inserted to enable activation

- no special functions must have been selected (Standby,

Cooling-Off, Vacation – where applicable).

If one of these special functions has been selected, the

"Zero Degrees" box must be deactivated manually, and

any fresh food inside it removed. If manual deactivation

does not take place, the box will be deactivated

automatically after 8 hours.

Note:

- if the symbol does not light up when the box is

activated, check that the box is properly inserted; if the

problem persists, contact your nearest authorized

After-sales Service

- if the box is active and the drawer open, the symbol on

the control panel may be deactivated automatically. If

the drawer is inserted, the symbol will become active

again

- irrespective of the state of the box, a slight noise may

be heard: this is normal and is not a cause for concern.

- when the box is not active, the temperature inside it

depends on the general temperature inside the

refrigerator compartment. In this case, we recommend

it is used to store fruit and vegetables which are not

sensitive to cold temperatures (fruits of the forest,

apples, apricots, carrots, spinach, lettuce, etc.).

Important: when the function is activated and there are

foodstuffs with a high water content, condensation may

form on shelves. In this case, disable the function

temporarily.

Removing the "Zero Degrees" box:

The "Zero Degrees" box can be

removed to create more space

inside the refrigerator. In this

case proceed as follows:

- switch off the box

- pull out the drawer and the

white plastic shelf underneath

the box.

Note: the upper shelf and the side supports cannot be

removed.

To restore "Zero Degrees" box operation, make sure you

replace the white plastic shelf underneath the box before

inserting the drawer and reactivating the function. To

optimise energy consumption, we recommend you

deactivate the "Zero Degrees" box and remove it.

Clean the box and all its parts regularly, using a cloth and a

solution of warm water and neutral detergent specifically

formulated for refrigerator interiors (take care not to

immerse the white plastic shelf underneath the box in

water).

Before cleaning the box (including the outside),

remove the drawer so as to disconnect the box from

the electricity supply.

Never use abrasive detergents.

GUIDE TO SELECTING FUNCTIONS

Functions and settings for the refrigerator

compartment.

Fridge

Refrigerator compartment temperature setting.

Vacation

This function turns the refrigerator compartment

to a warmer state if you are going away for some

time.

To select the function, press the "Options" button

several times, until the vacation symbol will

blink, then press "OK" to confirm.

To turn the refrigerator back to setting point

repeat this procedure. When the function is active

fridge temperature display shows " - " symbol.

Important: after activating this function, remove

all perishable foodstuffs from the refrigerator

compartment and leave the door closed, since the

refrigerator maintains a suitable temperature to

UKR CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

To activate/deactivate the box, press

the button as illustrated in the figure.

When the box has been

activated, the symbol lights up.

prevent the formation of unpleasant odours.

The freezer compartment will keep on working

as usual also during the Vacation mode.

On-Stand-by

This function turns off both the refrigerator and

freezer compartments. To enable the stand-by

function, press & hold the "On-stand-by" button

for 3 seconds, hyphens appear on both display to

indicate that the appliance is in stand-by. To

switch the appliance on again, follow the same

procedure until the previously set temperature is

shown on the display. When the appliance is in

stand-by the light inside the refrigerator

compartment does not work.

Remember that this operation does not

disconnect the appliance from the power supply.

Fast Cooling

The use of this function is recommended

when placing a very high quantity of food in

the refrigerator compartment.

To select the function, press the "Options" button

several times, until the Fast Cooling symbol

will blink, then press "OK" to confirm. The

function is automatically disabled after 6 hours, or

can be manually disabled by repeating the same

procedure.

Functions and settings for the freezer compartment

Freezer

Freezer compartment temperature setting.

Extra Load

The use of this function is recommended when

placing a very high quantity of food to be frozen in

the freezer compartment.

Activate this function 24 hours before freezing

fresh food. To select the function, press the

"Options" button just once, the Extra Load symbol

will blink, then press "OK" to confirm.

After 24 hours place the food to be frozen in the

upper basket of freezer compartment.

The function is automatically disabled after

48 hours, or can be manually disabled by

repeating the same procedure.

Party Mode

To select the function, press the "Options" button

several times, until the Party Mode symbol

will blink, then press "OK" to confirm. Use this

function to chill drinks inside the freezer

compartment. 30 minutes after selection (the

time required to chill a 0.75 l bottle without the

glass breaking), the symbol flashes, an acoustic

alarm sounds and the display lights up: remove

the bottle from the freezer compartment and

press the "Reset" button to disable the function.

Important: do not leave the bottle inside the

freezer compartment longer than the time

necessary for chilling.

Appliance, alarm and malfunction symbols

"6th Sense" function

The "6th Sense" function is automatically activated

when:

• a large amount of food is loaded into the

refrigerator and/or freezer

• the refrigerator and/or freezer door is left open

for a long time

• a prolonged power failure takes place, causing

the internal temperature of the appliance to

increase to values that cannot guarantee safe

storage of food.

The 6th Sense icon remains permanently lit.

"Key Lock" function

This function prevents anyone from inadvertently

changing settings or switching off the appliance.

To lock keys, press button "Options" for 3

seconds until the display shows the symbol :

an acoustic signal confirms the function has been

selected. To disable the function, follow the same

procedure until the symbol switches off.

Malfunction and After-sales Service symbol

(Call After-sales Service).

“Fresh Control”/“ProFresh”

The “Fresh Control”/“Profresh” is activated by

default and is working only with Fan on. To

deactivate the function, press the "Options"

button several times, until the “Fresh Control”/

“ProFresh” symbol will blink, then press "OK"

to confirm. The function can be reactivated by

repeating the same procedure. This function

controls the fridge fan in order to optimize food

preservation in any ambient temperature

conditions. To minimize the Energy consumption

is suggested to disable the “Fresh Control”/

“ProFresh” function and fan.

Function indicating the necessity

to replace the Anti-bacterial filter

The replacement of the filter is described on the

first page of this Product Sheet.

After 5 months of operation the icon appears,

indicating that filter shall be replace soon.

After 6 months of operation, the acoustic alarm

appears and icon will blink, indicating that it is

necessary to replace the filter. After replacing the

filter, keep the "Reset" button pressed for 3

seconds and the icon disengage permanently.

It is possible to mute alarm until the filter is

replaced by pressing the "Reset" button shortly.

The filter alarm will be visible till the reset of the

filter alarm by "Reset" button pressed for more

than 5 seconds. The filter can be replace at any

time and filter icon status can be refresh by the

User interface pressing "Reset" button for 3

seconds and the icon disengage permanently.

Alarms

In the event of an alarm, the acoustic sound is

activated.

Overtemperature alarm

The acoustic alarm sounds and the freezer

temperature indicator flashes "- -".

The alarm is activated when:

• The appliance is connected to the power supply

for the first time or after prolonged disuse

• The freezer compartment temperature is too

high

UKR CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

• The quantity of foods loaded into the freezer

exceeds that indicated on the data plate

• The freezer door has been left open for a long

time

To mute alarm buzzer press "Reset" button just

once, and the acoustic alarm goes off.

Power failure alarm "Black Out Alert"

In the event of an interruption in electricity, your

fridge-freezer is designed to automatically

monitor the temperature in the freezer when

electricity is resupplied. If the temperature in the

freezer rises above freezing level, the Black Out

Alert (icon and buzzer) is activated when

electricity is re-supplied. Freezer compartment

temperature display shows the highest

temperature reached during the Black Out.

To reset the alarm press the "Reset" button, the

acoustic alarm goes off and the icon disengage.

If the Alarm is activated, the following actions are

recommended:

• If the food in the freezer is unfrozen but still

cold, all the food in the freezer should be

moved to the fridge compartment and eaten

within the next 24 hours.

• If the food in the freezer is frozen, this indicates

the food was thawed and then refrozen when

electricity was re-supplied which degrades

taste, quality and nutritional value and also

could be unsafe.

It is recommended to not consume the food but

to dispose of the entire content of the freezer.

The Black Out Alert system is designed to

provide guidance on food quality in the freezer in

the event of electricity black out.

This system does not guarantee food quality or

safety and consumers are advised to use their

own judgment in evaluating food quality in freezer

and refrigerator compartments.

Refrigerator door open alarm

The refrigerator door symbol lights up blinking

and the acoustic alarm sounds.

The alarm is activated when the refrigerator's

door is left open for more than 2 minutes. Press

"Reset" to mute the acoustic alarm.

If the door is not closed, the acoustic alarm will

sound again after two minutes. To disengage the

door alarms close the fridge door.

Operation alarms

In the event of operation alarms, other alarms will

also be displayed in the refrigerator or freezer

compartment, depending on the malfunction site,

(e.g. CF, AL01, AL02, AL03 etc...) call After-sales

Service and specify the alarm code.

CLEANING

Press the Stand-by button, which allows you to switch off

the appliance. Remember that this operation does not

disconnect the appliance from the power supply.

The refrigerator / freezer compartment can now be

emptied and cleaned.

DEFROSTING THE FREEZER COMPARTMENT

No Frost freezers provide chilled air circulation around

the storage areas and prevent the formation of ice,

thereby completely eliminating the need for defrosting.

Frozen items don't stick to the walls, labeling stays legible

and storage space remains neat and clear.

In combination with , not only does it control the

sensor, but directs the cooling power exactly where it is

needed, optimizing energy efficiency.

DEFROSTING THE REFRIGERATOR

COMPARTMENT

Refrigerator compartment defrosting is completely

automatic.

Droplets of water on the rear wall inside the refrigerator

compartment indicate that the automatic defrost phase is

in progress. The defrost water is automatically run into a

drain hole and collected in a container, where it

evaporates.

LED'S LIGHTING

If the inside LED light is not

working, it must be replace by

service.

HOW CAN INCREASE THE FREEZER

COMPARTMENT CAPACITY

In certain models you can increase the freezer

compartment capacity by:

- Removing the shelf with the turntable.

- Removing the turntable only.

Please refer to the figures beside to see how to proceed.

How to make ice cubes

Depending on the model:

With a turntable and ice-cube trays

• Remove the turntable, fill the trays with water to

approx. 3/4 and place back in the appliance.

• The ice-cubes will be automatically ejected into the

container after turning the ice-cube tray knobs

With an ice-cube tray

• Fill the ice-cube tray with water to approx. 3/4 and

insert it into the SFF section of the freezer

compartment.

• Do not use any sharp or cutting items to remove the

tray.

UKR CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

5019 636 01015

Printed in Poland 05/11

Whirlpool WTC37662 A++NFCX Program Chart

Brand: Whirlpool

Model: WTC37662 A++NFCX

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

WTC 3746 A+NFCX

Download PDF

report

Whirlpool WTC37662 A++NFCX Program Chart

This manual is also suitable for

Whirlpool WTC37662 A++NFCX Program Chart

Related papers

Other documents