EN
1. External indicators of Power On and alarms
2. Control panel
3. Main LED’s lighting
4. Fan
5. Lighting in Multi-flow*
6. Shelf divider*
7. Multi-flow cold air area*
8. Bottle rack *
9. Sensor cover
10. Zero degrees drawer*
11. Rating plate with commercial name
12. Cooler compartment (best for meat and fish)
13. Area shelves
14. Fruits and vegetables crisper
15. Crisper divider *
16. Door reversibility kit
17. Egg tray*
18. Bottle holder*
19. Door trays
20. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply,
the display lights up and all the icons appear on the
display for approximately 1 second. The default (factory)
values of the freezer compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary
from model to model
2
4
7
6
9
17
12
18
8
10
13
X
X
3
5
19
20
16
1
11
14
15
Read the Instructions for Use carefully before
using the appliance.
5019 420 00042
QUICk START GUIDE
ALARMS TABLE
ALARM TYPE Signal Cause Cure
Door open alarm
The acoustical alarm is activated and the Alarm Indicator
blinks.
The door has remained open for more than 2 minutes Close the door or press the Stop Alarm to mute the acoustical alarm.
Malfunction The letter “F” blinks on the display (°C) Product malfunction. Contact the After-sales Service
UA
ROBG
RU
HUSKCZPLFIDKNOSEGRITPTESNLFRGBDE
KZ
4
1. INSTALLING TWO APPLIANCES
During installing the freezer and the fridge
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit (as shown on the drawing).
You can buy it in Service.
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
Two seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button. After about 15 seconds without
performing any action, the display goes off again.
When function is deactivated the normal display is
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Interface on the door.
2.2. 6th SENSE /
GREEN INTELLIGENCE
The 6th Sense/ Green Intelligence function works to
maintain the right temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in the
freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezing quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Sense/ Green Intelligence function. Therefore
significant duration variations are quite normal.
*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
GREEN INTELLIGENCE
This function automatically works to ensure the
optimal conditions to preserve the stored food. To
deactivate the
4
1. INSTALLING TWO APPLIANCES
During installing the freezer and the fridge
together ensure that the freezer is located on the left and
the fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit (as shown on the drawing).
You can buy it in Service.
2. FUNCTIONS
2.1. SMART DISPLAY*
This function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function.
Two seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button. After about 15 seconds without
performing any action, the display goes off again.
When function is deactivated the normal display is
restored. The Smart Display is automatically disabled
after a power failure. Remember that this function does
not disconnect the appliance from the power supply,
but only reduce the energy consumed by external
display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
This function is available only on the model with User
Interface on the door.
2.2. 6th SENSE /
GREEN INTELLIGENCE
The 6th Sense/ Green Intelligence function works to
maintain the right temperature in the following cases:
- Door opened for a while
The function activates when door opening causes the
internal temperature to increase to values that do not
ensure safe storage of food and remains active until
optimal storage conditions have been restored.
- Fresh food stored in the freezer
The function activates when fresh food is placed in the
freezer and remains active until optimal freezing
conditions are reached so as to ensure the best
freezing quality with the lowest power consumption.
Note: Besides the quantity of food loaded into the
freezer, ambient temperature and the quantity of food
already inside the freezer affect the duration of the 6th
Sense/ Green Intelligence function. Therefore
significant duration variations are quite normal.
*Available on selected models only. Please on the QUICK START GUIDE if this function is actually available on your model.
Green Intelligence, press and hold
Vacation
and Stop Alarm buttons at the same
time for 3 seconds until an audible signal sounds and
fan icon turns off as confirmation that the feature
has been deactivated. To reactivate this function
repeat the same procedure.
Note: Deactivation of the function switch-off the FAN
in the fridge.
POWER ON (EXTERNAL LED) indicator
An external green LED showing that the appliance is switched ON.
It automatically turns off when opening the door.
ALARM (EXTERNAL LED) indicator
This red LED can blink to show the occurrence of an alarm or a failure even when the
door is closed. Please open the door and check on the internal Control Panel which
alarm/failure is occurring.
TEMPERATURE
DISPLAY
ON/STANDBY button
To put the product in Stand-by, press
and hold the button for 3 seconds.
All the icons turn off except On/
Standby indicator . To reactivate
the appliance press once (briefly) this
button. (see the Instructions for Use).
TEMPERATURE button
Press the Temperature button
to change
the temperature: the value changes cyclically
between 8°C ad 2°C.
Note: Displayed set points correspond to the
average temperature throughout the whole
refrigerator.
FAST COOL button
Using Fast Cool function it is possible to increase the cooling capacity in the refrigerator
compartment. The use of this function is recommended when placing a very high quantity of food
in the refrigerator compartment. Press the Fast Cool button
to activate Fast Cool function.
When activated, the Fast Cool indicator turns on. The function is automatically disabled after
6 hours, or can be manually disabled by pressing Fast Cool button
again.
STOP ALARM button
Press in case of alarm to mute the acoustic alarm.
VACATION button
This function can be activated to reduce the energy
consumption of the appliance during a prolonged
period of time. Before activating the feature, all
perishable food should be removed from the
refrigeration compartment and make sure that the
door is closed properly, since the refrigerator will
maintain a suitable temperature to prevent the
formation of unpleasant odors (+12°C). To activate/
deactivate press the Vacation mode button for
3 seconds. When the function is enabled, the
related symbol will light up and the temperature of
the refrigerator compartment will be set to a higher
setpoint (the temperature display will show the
new temperature setpoint of +12°C). Changing the
temperature setpoint will automatically deactivate the
function.
FAN
The Fan improves temperature distribution inside the
product, allowing better preservation of stored food.
By default, the fan is switched on. To switch off the
FAN press and hold Vacation
and Stop Alarm
buttons at the same time for 3 seconds until an
audible signal sounds and fan icon will turn off
as confirmation that the fan has been switched off.
To switched on the FAN repeat the same procedure.
As a confirmation audible signal sounds and the icon
turns on.
FAST COOL indicator
ALARM indicator (see the below Alarms Table)
ON/STANDBY indicator
VACATION indicator
Printed in Italy 01/14 - Bauknecht
®
Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2013. All rights reserved - http://www.bauknecht.eu
