RF CDW Color Remote Controller 09.02804.04726

Operation

1. Pair with RF receivers:

Turn on the

2. How to delete the pairing:

Press and hold down “Learning Key” on the receiver for over 3 seconds until connected LED lights flicker twice,

which means the pairing is deleted successfully.

Function introduction

Front side

Bottom side

• Control 1 zone

• Dual color controller

• High sensitive & high stable touch color wheel, fast & precise color control.

• Compatible with all universal series RF receivers

• 1 receiver can be paired by max 8 different remote controls.

• Waterproof grade: IP20

Product Data

• This device contains a lithium battery that shall be stored and disposed properly.

Lear ning Ke y

RF LED Rec eiv er

Working status indicator, the sender is

in dormant status when the indicator is

off. The sender is under working when

the indicator is flashing rapidly. If the

indicator continues flashing at the

frequency of 1 second, it indicates that

the sender batteries low and needs to

brightness of all channels

brightness of all channels

Touch color wheel, touch to adjust

color temperature of WW, NW, CW.

On/Off

Press and hold down to decrease

brightness of Warm White

Press and hold down to increase

brightness of Warm White

Press and hold down to decrease

brightness of Natural White

Press and hold down to increase

brightness of Natural White

Press and hold down to decrease

brightness of cold white

Press and hold down to increase

brightness of cold white