CHARGING YOUR MOBILE DEVICE
• Plug the charging cord of your mobile device to its
charging outlet.
• Plug the charging cord into the power pack.
• Hold the switch of the power pack for 1-2
seconds. When your mobile device is connected
successfully, the battery status indicator will
illuminate according to the battery capacity inside
the battery pack.
• When the mobile device is fully charged, disconnect
it from the power pack.
• The power pack will be able to charge a mobile
device until the battery capacity of the power pack
is drained. When it is drained, the battery status
indicator will be off.
LED FLASHLIGHT
• To turn ON the flashlight, hold the switch of the
power pack for 3 seconds. When the flashlight
is ON, the battery status indicator will be on
throughout the flashlight operation.
• To turn off the flashlight, hold the switch of the
power pack for 3 seconds.
WARNING
KEEP OUT OF REACH OF CHILDREN. READ ALL
INSTRUCTION BEFORE USE.
Danger – shock hazard. Keep the power pack away from
water and other liquids.