2. Computers & electronics
  3. Networking
  4. Power Line Communication (PLC)
  5. PowerLine network adapters
  6. ICIDU
  7. 200 MBPS

ICIDU 200 MBPS, NI-707525 Homeplug starterkit Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the ICIDU 200 MBPS Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MANUAL
NI-707525
HOMEPLUG ADAPTER
STARTER KIT
200 MBPS
Firstly, thank you for purchasing this ICIDU Homeplug adapter. With this 200 Mbps Homeplug
adapter you can quickly and easily set up a network so that you perform tasks such as sharing
the internet and fi les. This adapter uses the electrical sockets in your home or offi ce to create a
connection between laptops or PCs with a transfer speed of 200 Mbps.
- PACKAGE CONTENTS
- TECHNICAL SPECIFICATIONS
- USE
- HARDWARE INSTALLATION
- SOFTWARE INSTALLATION
- SECURITY USING THE SECURITY
AND RESET BUTTON
- LED INDICATORS
- WARRANTY
ENGLISH
HOMEPLUG ADAPTER
STARTER KIT
200 MBPS
PACKAGE CONTENTS
Before you begin the installation, check that all of the required components are present.
The following should be present in the package:
- 2x Homeplug adapter
- 2x RJ45 Ethernet cable
- CD with manual and software
TECHNICAL SPECIFICATIONS
- Data transfer via electrical socket
- 200 Mbps data transfer
- 1x LAN
- Encryption: 128 AES
- Power consumption: 5W
- Windows 98SE, 2000, XP, Vista and Windows 7
USE
This Homeplug adapter allows you to provide multiple computers with simple access to your
broadband internet connection. In addition to sharing the internet connection, you can also set
up a network between different PCs.
HARDWARE INSTALLATION
Before installing the hardware, please take the following steps:
- Ensure that there is at least 1 free electrical socket available for each adapter.
- Insert the second, third etc. adapters into other electrical sockets, where applicable.
- Connect the adapter to the network and/or the computer using the network cables. There are 3
options for connection:
1 from router/switch to PC
2 from PC to PC
3 from router/switch to router/switch
Check that the LEDs ignite as indicated under heading “LED indicators”
SOFTWARE INSTALLATION
Install the Homeplug Utility from the CD using the ICIDU start screen. This provides additional
functionality and security. If you do not need this, you do not have to install the software. Without
software, you can use the Homeplug adapter immediately.
PLEASE NOTE: SECURING THE NETWORK IS ONLY NECESSARY IN THE EVENT THAT OTHERS ARE
ABLE TO ACCESS YOUR ELECTRICITY NETWORK.
SECURITY USING THE SECURITY AND RESET BUTTON
In order to create a secure network with two or more Homeplug adapters, you can use the
“Security” button. The security code is saved in the equipment, and cannot therefore be read.
SCENARIO 1: SETTING UP A SECURE NETWORK BETWEEN ADAPTER “A” AND “B”.
1. Press the “Security” button on adapter A for 10 seconds until the lamps go out.
2. Press the “Security” button on adapter B for 10 seconds until the lamps go out.
3. Press the “Security” button on adapter A for 1 second.
4. Press the “Security” button on adapter B for 1 second.
5. The lamps on both adapters will go out and then on again. After a maximum of 1
minute, the connection will be set up and secured.
SCENARIO 2: ADD AN ADDITIONAL ADAPTER “C” TO THE NETWORK BETWEEN “A” AND “B”.
1. Press the “Security” button on adapter C for 10 seconds until the lamps go out.
2. Press the “Security” button on adapter A for 1 second.
3. Press the “Security” button on adapter B for 1 second.
4. The lamps on adapter C will go out and then on again. After a maximum of 1 minute,
the connection will be set up and secured.
The “reset” button can be used to return an adapter to its factory settings. The adapter will then
be unsecured, and will only be able to communicate with unsecured adapters. To reset, press
the button for 2 seconds. All lamps will go out briefl y.
LED INDICATORS
The ICIDU 200 Mbps Homeplug adapter has 3 LED indicators
LED indicator Status Indication
Data On Another adapter has been detected on the same network.
Off No adapter has been detected on the same network.
Flashing Activity on the Homeplug network.
Power On The adapter is connected.
Ethernet On The network port is connected correctly and ready to
send/receive data.
Off The network port is not connected correctly.
Flashing The network port is sending/receiving data.
WARRANTY
Unless specifi ed otherwise, all items sold under the ICIDU name are covered by a ten-years
warranty. No warranty or support is provided for the software and rechargeable batteries that
are provided. Claims under warranty can be made only via the dealer from whom the item was
purchased.
Specifi cations can be changed without notice.
All ICIDU products comply with current European safety and environmental
standards and legislation. For further details, visit our website www.icidu.com
ICIDU is a registered trademark. All other brand names and rights in connection with
them are and remain the property of the rightful owner.
© Copyright 2010 ICIDU
All rights expressly reserved
/