ZyXEL Powerline Ethernet Multiplug Center PLA491 User manual

Page is loading ...

About This User's Guide

PLA-4xx Series User’s Guide

3

About This User's Guide

Intended Audience

This manual is intended for people who want to configure the PLA-400, PLA-400 v2, PLA-

401, PLA401 v2, PLA402 v2, PLA-470, PLA470 v2 and PLA491 using the PLA-4xx Series

Configuration Utility version 3.0.5(AG). You should have your basic Internet access or home

network already set up.

Related Documentation

• Quick Start Guide

The Quick Start Guide is designed to help you get up and running right away. It contains

information on making your hardware connections.

• Supporting Disk

Refer to the included CD for support documents.

• ZyXEL Web Site

Please refer to www.zyxel.com

for additional support documentation and product

certifications.

User Guide Feedback

Help us help you. Send all User Guide-related comments, questions or suggestions for

improvement to the following address, or use e-mail instead. Thank you!

The Technical Writing Team,

ZyXEL Communications Corp.,

6 Innovation Road II,

Science-Based Industrial Park,

Hsinchu, 300, Taiwan.

E-mail: [email protected]

Document Conventions

PLA-4xx Series User’s Guide

4

Document Conventions

Warnings and Notes

These are how warnings and notes are shown in this User’s Guide.

1 Warnings tell you about things that could harm you or your device.

" Notes tell you other important information (for example, other things you may

need to configure or helpful tips) or recommendations.

Syntax Conventions

• The PLA-400, PLA-400 v2, PLA-401, PLA401 v2, PLA402 v2, PLA-470, PLA470 v2

and PLA491 may be referred to as the “PLA-4xx”, the “ZyXEL device”, the “device” or

the “powerline adapter” in this User’s Guide.

• The PLA-4xx Series Configuration Utility version 3.0.5(AG) may be referred to as the

“configuration utility” or the “utility” in this User’s Guide.

• Product labels, screen names, field labels and field choices are all in bold font.

• A key stroke is denoted by square brackets and uppercase text, for example, [ENTER]

means the “enter” or “return” key on your keyboard.

• “Enter” means for you to type one or more characters and then press the [ENTER] key.

“Select” or “choose” means for you to use one of the predefined choices.

• A right angle bracket ( > ) within a screen name denotes a mouse click. For example,

Maintenance > Log > Log Setting means you first click Maintenance in the navigation

panel, then the Log sub menu and finally the Log Setting tab to get to that screen.

• Units of measurement may denote the “metric” value or the “scientific” value. For

example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000”

or “1048576” and so on.

• “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”.

Document Conventions

PLA-4xx Series User’s Guide

5

Icons Used in Figures

Figures in this User’s Guide may use the following generic icons. The PLA-4xx icons used

may not be an exact representation of your device.

PLA-4xx Computer Notebook computer

Safety Warnings

PLA-4xx Series User’s Guide

6

Safety Warnings

1 For your safety, be sure to read and follow all warning notices and instructions.

• Do NOT use this product near water, for example, in a wet basement or near a swimming

pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.

• Do NOT store things on the device.

• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk

of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do NOT open the device or unit. Opening or removing covers can expose you to

dangerous high voltage points or other risks. ONLY qualified service personnel should

service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Use ONLY an appropriate power adapter or cord for your device.

• Connect the power adapter or cord to the right supply voltage (for example, 110V AC in

North America or 230V AC in Europe).

• Do NOT allow anything to rest on the power adapter or cord and do NOT place the

product where anyone can walk on the power adapter or cord.

• Do NOT use the device if the power adapter or cord is damaged as it might cause

electrocution.

• If the power adapter or cord is damaged, remove it from the power outlet.

• Do NOT attempt to repair the power adapter or cord. Contact your local vendor to order a

new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a

remote risk of electric shock from lightning.

• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your

device.

• If you wall mount your device, make sure that no electrical lines, gas or water pipes will

be damaged.

PLA-401 v2 models only:

• This power unit is intended to be correctly orientated in a vertical or floor mount position.

PLA-402 v2 models only:

• Make sure that the cable system is grounded so as to provide some protection against

voltage surges.

Safety Warnings

PLA-4xx Series User’s Guide

7

PLA-491 models only:

• Caution: Use only in dry locations.

• Caution: REDUNDANT BONDING CONDUCTOR SHALL BE CONNECTED TO A

LOCAL GROUNDING POINT UNLESS THE TOTAL SYSTEM LEAKAGE

CURRENT FROM ALL LOADS COMBINED IS VERIFIED TO BE LESS THAN 500

uA.

• For continued protection against risk of fire, replace only with same type and rating of

fuse.

• To reduce the risk of shock-use only indoors.

• For Household Use Only.

This product is recyclable. Dispose of it properly.

Safety Warnings

PLA-4xx Series User’s Guide

8

Table of Contents

PLA-4xx Series User’s Guide

9

Table of Contents

About This User's Guide..........................................................................................................3

Document Conventions............................................................................................................4

Safety Warnings........................................................................................................................6

Table of Contents......................................................................................................................9

List of Tables...........................................................................................................................13

List of Figures.........................................................................................................................15

Part I: Introduction................................................................................. 17

Chapter 1

Introducing the PLA-4xx ........................................................................................................19

1.1 Overview .............................................................................................................................. 19

1.2 Expand Your Network with the PLA-4xx .............................................................................. 19

1.3 Coaxial Cable Networks with the PLA402 v2 ...................................................................... 20

1.4 PLA491 Power Strip with EMI Filter ..................................................................................... 20

1.5 Ways to Manage the PLA-4xx ............................................................................................. 21

1.6 Security ................................................................................................................................ 22

1.6.1 Passwords .................................................................................................................. 22

1.6.2 Setting Up Security .................................................................................................... 22

1.7 Multiple Networks ................................................................................................................ 23

Chapter 2

Installing the Utility.................................................................................................................25

2.1 Overview of the Installation Process .................................................................................... 25

2.2 Installing the Utility ............................................................................................................... 25

Part II: Managing the PLA-4xx.............................................................. 31

Chapter 3

Firmware Tools........................................................................................................................33

3.1 Firmware Detection Tool ...................................................................................................... 33

3.1.1 Firmware Detection Issues ......................................................................................... 33

Table of Contents

PLA-4xx Series User’s Guide

10

3.1.2 Firmware Detection Procedure .................................................................................. 34

3.2 Firmware Upgrade Tool ....................................................................................................... 36

Chapter 4

The ENCRYPT Button.............................................................................................................39

4.1 ENCRYPT Button Overview ................................................................................................ 39

4.2 Set Up a HomePlug AV Network with ENCRYPT ................................................................ 39

4.3 Setting Up Multiple Networks ..............................................................................................41

4.4 ENCRYPT Button Behavior ................................................................................................. 43

Chapter 5

The Configuration Utility........................................................................................................45

5.1 Overview .............................................................................................................................. 45

5.1.1 Powerline Network Security ....................................................................................... 46

5.1.2 Device Access Key (DAK) .......................................................................................... 46

5.2 Starting the Configuration Utility .......................................................................................... 46

5.3 Configuration Screen .......................................................................................................... 47

5.4 Firmware Screen ................................................................................................................ 48

5.5 Network Info Screen ........................................................................................................... 49

5.6 Advanced Screen ............................................................................................................... 50

5.7 About Screen ....................................................................................................................... 53

Chapter 6

Powerline Network Setup Tutorial.........................................................................................55

6.1 Overview .............................................................................................................................. 55

6.1.1 Important Terms ......................................................................................................... 56

6.1.2 Accessing Your Powerline Adapter ............................................................................ 56

6.1.3 Adding a Powerline Adapter ....................................................................................... 57

6.1.4 Setting Up a New Network with a New Adapter ......................................................... 59

6.1.5 Splitting a Network into Two Networks ....................................................................... 60

6.2 Troubleshooting ................................................................................................................... 63

Chapter 7

LEDs and Troubleshooting....................................................................................................65

7.1 LEDs .................................................................................................................................... 65

7.1.1 PLA-401/PLA401 v2 ................................................................................................... 65

7.1.2 PLA-400/400 v2/402 v2 .............................................................................................. 67

7.1.3 PLA-470/PLA470 v2 ................................................................................................... 68

7.1.4 PLA491 ...................................................................................................................... 70

7.2 Power and Light Problems ..................................................................................................71

7.3 Configuration Utility Problems .............................................................................................73

7.4 Powerline Problems ............................................................................................................. 73

7.5 ENCRYPT Button Problems ................................................................................................ 74

Table of Contents

PLA-4xx Series User’s Guide

11

Part III: Appendices and Index.............................................................. 77

Appendix A Product Specifications.........................................................................................79

Appendix B Legal Information................................................................................................87

Appendix C Customer Support...............................................................................................91

Index.........................................................................................................................................97

Table of Contents

PLA-4xx Series User’s Guide

12

List of Tables

PLA-4xx Series User’s Guide

13

List of Tables

Table 1 Devices that can cause EMI on the power circuit ..................................................................... 21

Table 2 Password Summary .................................................................................................................. 22

Table 3 Firmware Detection Tool: Result Screen ................................................................................... 35

Table 4 Time ENCRYPT Button is Pressed and Action ......................................................................... 43

Table 5 Configuration Screen ................................................................................................................ 47

Table 6 Network Info Screen ................................................................................................................. 50

Table 7 Priority Settings ......................................................................................................................... 51

Table 8 Advanced Screen ...................................................................................................................... 53

Table 9 About Screen ............................................................................................................................ 53

Table 10 PLA-401 Lights ....................................................................................................................... 65

Table 11 PLA-401 v2 Lights ................................................................................................................... 66

Table 12 PLA-400 Lights ....................................................................................................................... 67

Table 13 PLA-400 v2/402 v2 Lights ....................................................................................................... 67

Table 14 PLA-470 Lights ....................................................................................................................... 69

Table 15 PLA470 v2 Lights .................................................................................................................... 69

Table 16 PLA491 Lights ......................................................................................................................... 71

Table 17 Hardware Specifications ......................................................................................................... 79

Table 18 Firmware Specifications .......................................................................................................... 81

Table 19 Performance ........................................................................................................................... 82

Table 20 Standards Supported .............................................................................................................. 82

Table 21 RJ-45 Connector Pin Assignments ......................................................................................... 84

List of Tables

PLA-4xx Series User’s Guide

14

List of Figures

PLA-4xx Series User’s Guide

15

List of Figures

Figure 1 Expand Your Network with the PLA-4xx ................................................................................... 19

Figure 2 Expand Your Network with the PLA402 v2 over Coaxial Cable Wiring .................................... 20

Figure 3 PLA491 Power Strip ................................................................................................................. 21

Figure 4 .NET Framework Installation Prompt ....................................................................................... 26

Figure 5 Microsoft’s Agreement .............................................................................................................. 26

Figure 6 .NET Framework Installation Process ...................................................................................... 27

Figure 7 Microsoft’s Agreement .............................................................................................................. 27

Figure 8 InstallShield Wizard Start Screen ............................................................................................. 27

Figure 9 Customer Information Input ...................................................................................................... 28

Figure 10 Install Destination Folder ........................................................................................................ 28

Figure 11 Restart Screen ........................................................................................................................ 29

Figure 12 Firmware Detection With an Early Firmware Local Device .................................................. 34

Figure 13 Firmware Detection With a Latest Firmware Local Device ................................................... 34

Figure 14 Firmware Detection Tool: Start ............................................................................................... 35

Figure 15 Firmware Detection Tool: Result ........................................................................................... 35

Figure 16 Firmware Upgrade Tool: Start ................................................................................................. 36

Figure 17 Firmware Upgrade Tool: Upgrading ...................................................................................... 37

Figure 18 Firmware Upgrade Tool: Finish ............................................................................................. 37

Figure 19 ENCRYPT Connection Procedure ......................................................................................... 40

Figure 20 Adding More Powerline Adapters to Your Network ............................................................... 41

Figure 21 One Existing Powerline Network ...........................................................................................41

Figure 22 Two Separate Powerline Networks ....................................................................................... 42

Figure 23 Example Network Setup ......................................................................................................... 45

Figure 24 PLA-4xx Series Configuration Utility Icon ............................................................................... 46

Figure 25 Configuration Screen ............................................................................................................. 47

Figure 26 Firmware Screen ................................................................................................................... 49

Figure 27 Network Info Screen .............................................................................................................. 49

Figure 28 Priority Settings ...................................................................................................................... 52

Figure 29 Advanced Screen ................................................................................................................... 52

Figure 30 About Screen .......................................................................................................................... 53

Figure 31 Plug Your Powerline Adapter into a Power Socket ................................................................. 56

Figure 32 Connect Your Powerline Adapter to a Computer .................................................................... 56

Figure 33 Click on the PLA-4xx Series Configuration Utility Icon ........................................................... 57

Figure 34 Add a Printer to Your Powerline Network ............................................................................... 57

Figure 35 Adding a New Adapter ........................................................................................................... 58

Figure 36 Adding an Adapter to an Existing Network .............................................................................58

Figure 37 Network Name Pop-up ........................................................................................................... 58

Figure 38 Add New Adapters to Make a Second Network ..................................................................... 59

List of Figures

PLA-4xx Series User’s Guide

16

Figure 39 Making a New Network with the New Adapter ....................................................................... 60

Figure 40 Local/Remote Adapters on a Powerline Network .................................................................. 61

Figure 41 Adding an Adapter to Your New Network ...............................................................................61

Figure 42 Incorrect DAK or No DAK ....................................................................................................... 62

Figure 43 Correct DAK .......................................................................................................................... 62

Figure 44 An Adapter on Your New Network .......................................................................................... 62

Figure 45 Adapters on a New Powerline Network ..................................................................................63

Figure 46 PLA-401 Lights ....................................................................................................................... 65

Figure 47 PLA-400/400 v2/ 402 v2 Lights .............................................................................................. 67

Figure 48 PLA-470 and PLA-470 v2 Lights ............................................................................................ 68

Figure 49 PLA491 Lights ........................................................................................................................ 70

Figure 50 Electromagnetic Interference (EMI) ........................................................................................ 83

Figure 51 Wall-mounting Example (PLA-4xx) ......................................................................................... 84

Figure 52 Wall-mounting Example (PLA-491) ........................................................................................ 84

Figure 53 RJ-45 Connector Pins ............................................................................................................ 84

17

PART I

Introduction

Introducing the PLA-4xx (19)

Installing the Utility (25)

Page is loading ...

PLA-4xx Series User’s Guide

19

CHAPTER 1

Introducing the PLA-4xx

1.1 Overview

This chapter introduces the main applications and features of the PLA-4xx HomePlug AV

compliant powerline adapter. See Appendix A on page 79 for detailed product specifications.

In this User’s Guide the electrical wiring network and coaxial cable network are both referred

to as “HomePlug AV”. The HomePlug AV standard specifies how network devices

communicate using standard electrical wiring.

1.2 Expand Your Network with the PLA-4xx

The PLA-4xx plugs into an ordinary power outlet to easily extend a cable or DSL broadband

connection or existing Ethernet (LAN) network to any other electrical outlet in any room of a

house, all without the need for any new cabling. Devices can securely communicate with each

other at high data transfer rates. (See Appendix A on page 79 for speeds currently supported

by the PLA-4xx.) The PLA-4xx uses 128-bit Advanced Encryption Standard (AES) to ensure

safe transfer of information.

Figure 1 Expand Your Network with the PLA-4xx

Connect your PLA-4xx to an Internet gateway such as a modem and plug it into an ordinary

power outlet in your home. Plug a second PLA-4xx into another power outlet and connect a

computer to the PLA-4xx for Internet access. Your network can be further expanded by

plugging additional PLA-4xxs into other outlets in your home and connecting other computers

or network devices (for example, a printer) to them.

Refer to your Quick Start Guide for hardware connection information. Refer to Appendix A on

page 79 for wall mounting instructions.

Chapter 1 Introducing the PLA-4xx

PLA-4xx Series User’s Guide

20

1.3 Coaxial Cable Networks with the PLA402 v2

The PLA402 v2 allows you to be more flexible in expanding your network by adding the

coaxial cable capability.

Figure 2 Expand Your Network with the PLA402 v2 over Coaxial Cable Wiring

As well as being able to connect your PLA402 v2 to a power outlet, you also have the option

of connecting to a coaxial cable outlet. Connect other powerline adapters in your powerline

network to coaxial cable outlets on the same line. Then set up your network with additional

devices such as a computer or printer the same way you would set up a powerline network on

an electrical circuit.

A coaxial connection has a far greater range than a powerline connection. This enables you to

set up networks for large areas.

If you are setting up a coaxial connection in a room with only one coaxial outlet you can use a

coaxial splitter to connect more than one device. For example, if you want to connect a TV and

a PLA402 v2 to a single outlet you could use a coaxial splitter.

1.4 PLA491 Power Strip with EMI Filter

The PLA491 is a powerline adapter and power strip for connecting electric devices. The power

outlets each have an EMI (Electromagnetic Interference) filter that reduces interference on the

power circuit from applicances such as hairdryers and lamps. Devices that cause interference

may reduce the speed of the traffic in your powerline network.

For an example of interference on a powerline network please refer to the Electromagnetic

Interference Example on page 82.

The following figure shows devices connected to the PLA491’s power outlets. A cell phone

charger can cause EMI on the power circuit so it is connected to a filtered power outlet on the

PLA491 to reduce any possible interference.

Chapter 1 Introducing the PLA-4xx

PLA-4xx Series User’s Guide

21

Figure 3 PLA491 Power Strip

" Do not connect a powerline adapter to the PLA491’s power outlets. Powerline

adapters connected in this way will not function correctly due to the EMI filter.

The table below lists some devices that can cause EMI on a power circuit. You may want to

connect these types of devices to the PLA491’s filtered power outlets to reduce the possibility

of interference on your powerline network.

1.5 Ways to Manage the PLA-4xx

Use the ENCRYPT button to add powerline devices to your powerline network if they have

this button. See Chapter 4 on page 39 for instructions on using the ENCRYPT feature.

Use the PLA-4xx Series Configuration Utility (or utility, for short) to manage the PLA-4xx.

See Section 2.2 on page 25 for instructions on installing the utility.

Use the firmware detection and firmware upgrade tools to upgrade to the latest firmware.

Because the latest PLA-4xxs are only compatible with other powerline devices with the latest

HomePlug AV firmware, as well as the latest version Utility, these tools are available to help

you upgrade. You can download both of these tools from the ZyXEL website

(www.zyxel.com.tw). See Chapter 3 on page 33 for information in using these tools.

Table 1 Devices that can cause EMI on the power circuit

DEVICES

Cell phone chargers

Lamps

Hair Dryers

Vaccuum Cleaners

Devices with motors, for example electric drills

Chapter 1 Introducing the PLA-4xx

PLA-4xx Series User’s Guide

22

" This User’s Guide describes the latest version utility. This utility is only

compatible with a PLA-4xx which has the latest firmware installed. If you don’t

already have them, download the latest firmware and utility from the ZyXEL

website.

1.6 Security

Since your powerline network may extend outside your premises, it is important to set up

security on your PLA-4xx.

1.6.1 Passwords

You use two types of passwords in the HomePlug AV powerline network. The following table

describes the differences between the passwords.

1.6.2 Setting Up Security

The ENCRYPT feature automatically sets up security on your powerline network. Use this

feature if your powerline devices have the ENCRYPT button.

If your devices do not have the ENCRYPT button, use the PLA-4xx Series Configuration

Utility to set up security on the PLA-4xx. Although the PLA-4xx is a “plug-and-play”

network expanding solution there are several reasons for enabling security on the powerline

network in your home.

1 It’s easy and only requires you to change a network name.

2 It’s a good idea to ensure privacy of your communication. When you use the PLA-4xx

and other powerline adapters, the electrical wiring in your home becomes an extension

of your Ethernet network. Your network traffic flows freely within the electrical circuit

of your home and is bounded in most cases by a power meter.

Table 2 Password Summary

PASSWORD DESCRIPTION

Network Name All powerline adapters that follow the HomePlug AV standard are

shipped with the same powerline network name “HomePlugAV”.

Change the network name via the PLA-4xx Series Configuration

Utility to create a private network. See Section 5.3 on page 47.

DAK (Data Access

Key) Password

In order to manage the powerline adapters on your powerline

network you must enter the adapters’ DAK password in the PLA-4xx

Series Configuration Utility. This password is printed on the

powerline adapter itself.

You don’t need to add the password for the powerline adapter

directly connected to the computer running the configuration utility

(local powerline adapter), you only have to add the remote powerline

adapters’ passwords (those on your circuit, but not directly

connected to your computer).

Chapter 1 Introducing the PLA-4xx

PLA-4xx Series User’s Guide

23

Without security (encryption) your information is accessible to anyone using a powerline

adapter on the same electrical circuit. In some cases, a circuit can be shared by more than

one household.

To prevent compromising your network security, you can create a private network. A

private network uses a secret password (Network Name) to make sure that only

permitted powerline adapters can communicate in your network. See Section 5.3 on page

47 for information on setting up a private network.

" Buildings and even streets may share a coaxial cable connection. If your

powerline network uses a coaxial cable, the network will probably extend

outside your premises. In this case make your network more secure with a

private network name.

3 You may need to change the Network Name to create multiple powerline networks. See

the next section for more information on how to set up a multiple network.

1.7 Multiple Networks

Multiple powerline networks can coexist on a single powerline circuit. You might want to

implement multiple powerline networks in a small office environment where you have two

separate Ethernet networks.

1 Connect one powerline adapter to a router or switch on the first Ethernet network and

assign a Network Name (for example “Password1”) to this powerline adapter. Add

additional powerline adapters to your network by plugging them into your powerline

outlets and assigning them “Password1”. This completes the configuration of your first

powerline network.

2 Connect another powerline adapter to a router or switch on the second Ethernet network

and assign a different Network Name (for example “Password2”) to this powerline

adapter. Again, add additional powerline adapters and assign them “Password2”.

You now have two private networks on your powerline circuit. Information is not shared

between the two networks as only powerline adapters with the same Network Name can

communicate with each other.

Page is loading ...

ZyXEL Powerline Ethernet Multiplug Center PLA491 User manual

ZyXEL Powerline Ethernet Multiplug Center PLA491 User manual

Related papers

Other documents