WWW.LEGRAND.US
12
WALL PLATE VOLUME CONTROL
(PART NO. 2601-40884-000)
Audio reinforcement is a crucial
part of a classroom, lecture
hall, or conference room. This
mechanical volume control wall
plate conveniently adds control to
an amplifier that is concealed in the
ceiling or another location.
The volume control is designed to
work with amplifier 2601-40880-000
or 2601-40881-000 and will work with
any 10k ohms 3-wire amplifier.
70/25V 50W AUDIO AMPLIFIER
PLENUM RATED
(PART NO. 2601-40881-000)
This audio amplifier is an ideal
solution for supporting a distributed
audio system in a classroom,
conference room, or other
environment that requires installation
in a plenum space. This amplifier
supplies 50 watts of power – 25 watts
per channel. The amplifier offers
three separate inputs and will work
in conjunction with existing PA
paging systems.
Notes: Available as an 8 ohms system -
2601-40880-000.
BULK 18AWG SHIELDED SPEAKER
WIRE – PLENUM CMP-RATED
(PART NO. 2601-29203-025)
This wire is constructed from two
color-coded (red and black) 18AWG
twisted pair copper cables to ensure
easy identification, and features a
100% coverage foil shield to protect
against EMI/RFI signal interference.
Connect an amplifier to speakers in
a plenum space, near electrical runs,
or light ballasts with full confidence
that there will be no interference.
Notes: Available in lengths 25–500ft.
2x2 DROP IN CEILING SPEAKER
70/25 VOLT – PLENUM RATED
(PART NO. 2601-41109-000)
Designed to be used in K-12
classrooms, conference rooms, or
other work spaces that have dropped
ceilings to deliver high quality audio
for presentations, video clips, movies
and other curriculum. This speaker is
designed to mount in the drop-ceiling
frame and disperse sound downward
at 120° to provide audio coverage to
the entire audience.
Notes: Also available for 8 ohms systems -
2601-41108-000.
WALL PLATE AMPLIFIER
(PART NO. 2601-40913-000)
Ideal for meeting spaces, classrooms
or huddle spaces, this small amplifier
is designed to fit in a Decora
®
style
wall plate. It is easy to install on
mobile A/V carts and drives external
speakers in a classroom, or retrofits
a meeting room for audio. The Decora
style plate can be installed into a
surface mount wall box and can
utilize surface mount cable track,
to connect to wall mount speakers.
Either solution offers flexibility and
ease of install when a room needs
audio reinforcement.
HDMI
®
, VGA, AND AUDIO TO HDMI
CONVERTER SWITCH
(PART NO. 2215-40814-ADT)
Installs in conference rooms,
classrooms, or board rooms to
ensure that any presenter using a
laptop or tablet with a VGA or HDMI
video output can walk in and connect
to the display that is installed in the
room. This converter simplifies the
user experience by eliminating the
need for additional adapters, and
allows the projector or display to
remain on the same HDMI input for
all connected devices.
A/V AND PC