Argos Kids Scandinavia XL Storage Box Assembly Instructions Manual

Brand
Argos
Model
Kids Scandinavia XL Storage Box
Type
Assembly Instructions Manual
Kids Scandinavia - XL Storage Box
Dimensions
Width - 87cm
Depth - 42cm
Height - 63.5cm
Sainsbury’s Argos
489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
MK9 2NW
Issue 2 - 23/11/2016
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Assembly Instructions - Please keep for future reference
499/3144
487/6584
Retain these instructions for future reference
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
• Check you have all the
components and tools listed on
pages 2 and 3.
• Do not use this item if any
components are missing or
damaged.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product is suitable for
children in the age range which
the product is designed, 3-12
years.
• The maximum child weight
or load for the product is 30
kilograms.
• Assembly to be carried out by
a competent adult only
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Folding and unfolding this
product should only be carried
out under adult supervision.
• Ensure that ngers and legs
are clear of all adjustments
when adjusting this product.
• Regularly check all fastenings
to ensure that they properly
tightened.
Components - Panels
Please check you have all the panels listed below
2
Top plinth (83.4 x 8cm)
3
Right side (63.5 x 42cm)
2
Left side (63.5 x 42cm)
1
Front panel (83.4 x 38.5cm)
5
Top (83 x 42cm)
4
Back panel (83.4 x 38.5cm)
6
Bottom (84.6 x 40cm)
7
Rail x 4 (38 x 2.5cm)
8
underside
If you have damaged or missing components,
call the Customer Helpline:
03456 400 800
3
Please check you have all the ttings listed below
50mm Screw x 10
Ruler - Use this ruler to help correctly identify the screws
Tools required
A
20mm Screw x 8
E
Allen key x 1
B
15mm Screw x 12
H
30mm Dowel x 2
C
20mm Dowel x 8
I
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
100 20 30 40 50 60 70 80 90 100
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
15mm Screw x 4
F
Flap hinge x 2
D
Safety hinge x 1
G
Components - Fittings
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
4
Assembly Instructions
Step 1
Step 2
C
I
C
I
E
E
C
Inserting the dowel to
the top plinth.
Insert the dowels
C
into
the holes indicated on
the top plinth
3
.
Mounting the rail onto
the side.
Put dowels
I
in the right
side
2
.
Press the Rail
8
onto
the right side
2
.
Fix the rail using screws
E
trough the holes
indicated.
Repeat with left side
panel
1
.
Components - Key Diagram
3
4
1
7
6
5
2
8
8
Top plinth
3
Right side
2
Rail
8
5
Assembly Instructions
Fixing the flap hinges
onto the back panel.
Fix the ap hinges
D
onto the back panel
6
using screws
H
.
Mounting the top plinth,
the front panel and the
back panel onto the left
side.
Press the top plinth
3
,
the front panel
5
and the
back panel
6
onto the
left side
1
.
Fix the top plinth, the front
panel and the back panel
using screws
A
and allen
key
B
through the holes
indicated.
Step 4
Step 3
A
D
H
H
H
D
H
H
H
D
H
H
H
A
A
A
A
B
A
Top plinth
3
Back panel
6
Left side
1
Front panel
5
Back panel
6
Assembly Instructions
6
Slide the bottom into
the front panel, the
back panel and the left
side.
Slide the bottom
7
into
the grooves of the front
panel
5
, the back panel
6
and the left side
1
.
Step 6
Step 5
Mounting the right side
onto the top plinth,
the front panel and the
back panel.
Press the right side
2
onto the top plinth
3
, the front panel
5
and
the back panel
6
.
Fix the right side using
screws
A
and allen key
B
through the holes
indicated.
A
A
A
A
A
A
B
Front panel
5
Front panel
5
Back panel
6
Back panel
6
Right side
2
Left side
1
3
3
Bottom
7
7
Assembly Instructions
Mounting the rails onto
the top
Insert the dowels
I
into
the holes indicated on
the top
4
.
Pres the rails
8
onto the
top
4
.
Fix the rails using screws
E
throug the holes
indicated.
Mounting the top onto
the back panel.
Press the top
4
, onto
the back panel
6
.
Fix the top using screws
H
through the holes
indicated on ap hinges
D
.
Step 8
Step 7
H
H
D
D
H
H
E
E
E
I
I
I
I
I
E
E
1
5
Top panel
4
Back panel
6
Top panel
4
Rail
8
Rail
8
F
F F
G
G
Top panel
4
Top panel
4
4
4
6
6
6
6
Assembly Instructions
8
Mounting the safety
hinge onto the back
panel.
Fix the safety hinge
G
onto the back panel
6
using screws
F
into the
pre-drilled holes.
Step 10
Step 9
Mount the safety hinge
onto the top.
Fix the safety hinge
G
onto the top
4
using
screws
F
into the pre-
drilled holes.
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
F
9
Dear Customer
Please note that the product you have purchased is a
natural living timber.
Just like nature itself, wood varies in shape and
colour. Knots, vein patterns, resin pockets and colour
differences contribute to giving the piece of furniture its
beauty and form - a natural part of solid wood.
Although the tree has been cut down and dried, it
is still alive and therefore will react to high and low
temperatures, light, humidity, drought and time.
In cold and dry periods, the wood contracts which may
lead to small cracks in the piece of furniture. The reverse
happens in warm and humid periods where the wood
expands and this may result in slight unevenness.
The colour of the wood also changes with time,
particulary if the furniture is placed in a light place.
This is a natural process and part of owning a piece of
furniture made of solid wood.
Any flexing that has occured during transport will
re-correct itself once this product is correctly assembled.
Tighten all joints of the furniture after six months.
Please keep these instructions in a safe place for future
use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Argos Kids Scandinavia XL Storage Box Assembly Instructions Manual

Brand
Argos
Model
Kids Scandinavia XL Storage Box
Type
Assembly Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents