Identification:
Technical Bulletin:
Date:
Issuer:
Factory:
D06
CGX2008-05 (page 1 of 1)
28 February 2008
R. Sartor (DWS Customer Support)
CGX – Dishwashing – Pordenone (I)
Subject
Nut for Feeding Motor in WTM & RTC/WTC
Model
Modular Rack Type range (Electrolux WTM series) and Compact Rack Type
range (Electrolux WTC series and Zanussi RTC series).
Problem
Loose nut at the delivery.
Reason
The nylon insert lock nut 0L0151 has to be tightened with a torque of 45 Nm.
It may happen that the actual friction is so high that there’s a torque of 45 Nm
but the nut is not tightened properly.
Action in
Factory
From serial number 74900001 we have introduced nut 0L1712 + stop dowel
M8 (No spare part code available. Production code 217015125) instead of the
nylon insert lock nut 0L0151:
nut 0L1712
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
Action in
Field
“New” nut + stop dowel are perfectly interchangeable towards the “old” nylon
insert lock nut.
nut 0L1712
nylon insert
lock nut 0L0151
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380636
++39 0434 385646
Share more of our thinking at www.electrolux.com
Technical Bulletin (Nut for Feeding Motor).doc