Place both A pieces about 16 inches apart with slots
facing up with slots facing up.
Secure items using
cord item G on both
sides.
Slide the bottom outside slot of 1 part C into the slot
on both part A’s.
Place both part B’s behind parts A with slots facing up. Slide the bottom outside slot of 2 part C’s into the slots
at both ends of part’s B.
Connect the portions of the ramp by sliding both parts D
into the slots on parts C that are in both parts A and B.
Place part E (deck with logo) on both part A’s.
Making sure the nodules go into the holes.
Place part F on both parts B’s making sure
the nodules go into the holes.
