2. smpl
  3. Pairing Wearable Alerts to Bells Sensors
Pairing Wearable Alerts to Bells Sensors

smpl Pairing Wearable Alerts to Bells Sensors User guide

  • Hello! I've analyzed the provided Quick Start Guide for simpl Pager Alert and Plug-in Alert. This document details how to pair your alerts with bells and sensors, adjust volume, and select tunes. It also includes steps for pairing multiple devices. I'm ready to answer any questions about the document and the products described in it.
  • How do I turn on the Wearable Pager Alert?
    How to turn on pairing mode on Plug-in Alert?
    How do I select a tune?
    How do I select a volume?
    How do I know if pairing is successful?
Wearable
Pager Alert
ON
OFF
Quick Start Guide Pairing Wearable Alerts to Bells/Sensors
STEP 1
Turn on
Snap off the Belt Clip by rmly
pushing it downwards. Then
slide off the battery cover.
Insert 2 x AAA batteries.
Turn on.
STEP 2
Select Tune
Using the enclosed pointer,
repeatedly press and release
the inset TUNE Select button
to select one of the
35 tunes.
STEP 4
Pairing Mode
Press and hold the VOLUME Adjust
button for 5 seconds until you hear
a ‘chirp’ sound, and then release.
The Pairing mode lasts for
only 5 seconds.
STEP 5
STEP 6
Pairing
More Pairing
Immediately trigger the Bell/Sensor
your are pairing. If you hear the
selected tune, paring is successful.
If you hear the “chirp” sound
again, pairing failed.
Repeat steps 4 & 5.
To Pair additional Bells or Sensors,
start at STEP 2. Bells or Sensors
can be associated with their
own tune and volume
to differentiate its
location, if desired.
STEP 3
Select Volume
Repeatedly press and release the
VOLUME Adjust inset button to
select the desired volume level
(5 levels including silent).
Belt Clip
Plug-in
Alert
STEP 2
Select Tune
Select one of the 35 TUNES
by repeatedly pressing and
releasing the TUNE selection
button forward
or backward.
STEP 1
Plug In
Quick Start Guide Pairing Plug-in Alerts to Bells/Sensors
STEP 4
Pairing Mode
STEP 5
STEP 6
Pairing
More Pairing
Immediately trigger the Bell/Sensor
your are paring. If you hear the
selected tune, paring is successful.
If you hear the “ding” sound again,
pairing failed. Repeat STEPS 4 & 5.
Start at Step 2 to pair additional
Bells/Sensors.
To Pair additional Bells or Sensors,
start at STEP 2. Bells or Sensors
can be associated with their
own tune and volume
to differentiate its
location, if desired.
STEP 3
Select Volume
Now repeatedly press the
VOLUME Adjust button until the
desired volume is selected
(5 levels including
silent).
Press and hold the VOLUME
Adjust button for 5 seconds until
you hear a ‘ding’’ sound, and then
release. The Pairing mode
lasts for only
5 seconds.
/