smpl F2 Installation guide

Test & Install Guide

Solar Doorbell

The wireless Solar Doorbell includes a

per-installed, long-life lithium-ion battery. The

rechargeable battery is powered by either

direct or indirect light.

The waterproof Solar Doorbell includes a

mounting bracket, adhesive pad and screws for

brick installation.

Test: When purchased in a kit, plug in the AC

Plug-in Alert or turn on the Wearable Pager

Alert (Section 4). Now, press the doorbell to

hear the Alert tune, or if you want to adjust the

volume or change the bell tune, see the User

Guide (Section 5) Pairing Sensors (Bells) to

Alerts’ using your preferred tune and volume

level.

Continued...

Solar Panel

Push Button

Mount the doorbell bracket in the desired location.

Use the screws OR use the adhesive pad. If using the adhesive pad, clean the

surface ﬁrst. Snap the solar Doorbell onto the secured mounting bracket.

Solar Doorbell

Install

Mounting

bracket

Adhesive

pad