2
Umbrella with Holder Stand Setup
• Insert the umbrella into the umbrella stand
and secure it with the help of knob.
Feature: Umbrella Holder Stand is made of
durable aluminium alloy, it won't chip, bend or
break.
• The base plate must be bolted to your cart
(Not Included) using 5/16-18" CSK/
countersunk bolts and requires that you drill
4 holes in the top shelf of your cart (11/32" is
a good t).
NOTE: The base plate of the umbrella holder
has 48 threaded mounngs in sizes 1/4-20" and
3/8-16".
• Umbrella clamp aaches to camera cart. It
consists of a cheese plate and a rod that
easily opens from the base when not needed.
Feature: Umbrella is a must-have designed to
keep your equipment dry in the rain and cool in
the harsh sunlight. This Umbrella ts with
included Holder Stand.
• To move the umbrella, press the buon as
shown in the picture.
• Aer pressing the buon, you can lt the
umbrella to the le side.
• you can lt the umbrella to the right side.
• Umbrella has 8 rib design provided as shown
in the picture.