Aiphone IX-SDH Install Manual

IX-SDH

Stainless Steel Door Housing

The IX-SDH is a stainless steel enclosure for the IX-DA or IX-BA network door stations. The enclosure

is made of 14 gauge stainless steel and is designed to mount to a 1 gang box or any at surface.

-INSTRUCTIONS-

IX-SDH Instr.

0318

MOUNTING INSTRUCTIONS:

1. Remove gray plastic cover from door station by pulling up on the tabs on the bottom of the

unit. The plastic cover can be discarded as it is not used when mounting with the IX-SDH.

2. Loosen the security screw with the security driver supplied with the door station.

3. Separate the door station from back frame.

4. Mount the back frame to any at surface or a single gang box, placing the stainless steel

mounting bracket between the wall or gang box and back frame.

5. Mount door station to the back frame with supplied security screw.

6. Peel adhesive strips from the wire mesh and secure it over speaker grill.

7. Attach stainless steel cover with the supplied tamper proof screws.

Aiphone Corporation

www.aiphone.com

(800) 692-0200

Wall or

Gang Box

3-5/16"

IX-SDH mounting bracket

Back frame

2 screws

IX-DA / IX-BA

Security screw

IX-SDH

wire mesh

Tamper proof

screws (2)

IX-SDH

cover

Gray front cover

(remove and discard)

5-½"

⁄