Q+
C 1=LLUR
I I
model: TLL511231
Tellur Enki Bluetooth headset
Instruction manual [1] Bluetooth/call button
Ãl [5l i
[3]
l2l
[2] Bluetooth LED (headset)
[3] Built-in mic
[/t] Portable charging case
[5] LED for charging (case)
[6] Input charging port — micro USB
[7] Charging cable for charging case
[4l
Power Dff
f) Press & hold Bluetooth/call button for 4 second ~ > OFF;
Charging the headset & case
• To charge the headset, attach it to charging case and the headset
will be charged automatically.
• To recharge the charging case, open the lid for micro USB port,
and connect the charging cable to USB power source;
> When the LED is Red and flashes the case is charging
> When the LED stays Red continuously, it indicates that the case
is fully charged
(If you charge the case with headset attached, the headset will
also be charged in the same time)
How to use
1. Press from behind and pop the headset out from the charger
carry case,
2. Hang the headset to the ear shell (either left or right ear).
Pairing 1" time
a) Press & hold Bluetooth/call button fir 2 seconds ~ > ON, until
you will hear the pairing sound.
b) Headset LED will flash rapidly in blue color;
c) Turn on the Bluetooth on your smartphone, search and select
(Tellur Enki);
d) You will hear the pairing confirmation sound and the headset LED
will slowly blink in blue color;
e) Pairing & connection to your phone is successful.
headset
g) The headset LED will turn OFF.
Pairing Again
h) If the headset is paired and ON, but you want to pair another
phone;
i) Press & hold Bluetooth/call button ~2s
j) The headset LED will rapidly blink in Blue color;
k) Repeat above step c) to e) to pair another phone;
Redial
— If there are no incoming calls, double click Bluetooth/call button;
• e to redial last number in call out history of the phone
Others
Adjust volume by operating your phone.
Re-connect Phone
I) Make sure the phone has Bluetooth ON before turning ON the
m) Press & hold Bluetooth/call button~ 2s > ON
n) You will hear the pairing confirmation sound and the headset LED
will slowly blink in blue color;
o) Pairing & connection to your phone is successful.
Call-pick / end / reject
— During incoming call click Bluetooth/call button; • = call pick;
— Click again • = call end;
— Press & hold Bluetooth/call button ~ 1s to reject call directly
I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I
Reset headset — repeat steps f) to k) as above [Power off and
Pairing Again], or attach headset back to holder to charge
Battery low ~ recharge
- headset LED blinks slowly in red color.
- repeat steps as above [Charging the headset and case]
Specifications:
• Bluetooth version: v4.2, class II
• Wireless range: 10m
• Talk/Play time: Up to 3 hours+ 12 hours with charging case
• Charging case: 200 mA, up to 4 full charges
• Charging time headset: 1 hour
• Charging time charging case: 1.5 hours
• Charging interface: Micro USB (for charging case)
• Other features: IPX4 splash proof
• Available colors: Black
• Product dimensions: 92mm x 7mm x 60mm
(incl. charging case)
• Product weight: 12 grams (headset)
• Total weight: 31 grams (incl. charging case)
sin Marinarilon nn29
Sector 1, aucurestl Romania
ABN Systems International
6
o004.021.233.09.95
Disposal and recyciing information
©
I
separate waste collection points at the end of their working lives;
they must not be disposed of in the normal waste stream with
household garbage. It is the responsibility of the user to dispose of
the equipment using a designated collection point or service for
separate recycling of waste electrical and electronic equipment
(WEEE) and batteries according to local laws. Proper collection and
recycling of your equipment helps ensure EEE waste is recycled in a
manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental
breakage, damage, and/or improper recycling at the end of its life
may be harmful for health and environment.
The crossed-out wheeled-bin symbol on your product, battery,
literature or packaging reminds you that all electronic products
and batteries must be taken to
officeetelluncom
officeaabnsystems.ro
www.teuuncom C6
Declaration of conformity
We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest, Sector 1, Marinarilor
street, nr. 31, declare on own responsibility that the product below:
Product description: Bluetooth headstet Totter Enki
Brand: Totter
Product code: TLL511231
Does not endanger life, health, work safety, does not have a negative impact
on the environment and corresponds to the standards stated in the
manufacturer's declaration of conformity. The product is compliant with the
following standards and / or other normative documents:
RED - 2014/53/EU
Applied standards:
ETSI EN 300 328 V2.1.1 [2016-11)
EN 55032:2015/AC:2016-07
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55035:2017
ETSI EN 301 489-1 V2.1.1 (2017-02)
ETSI EN 301 489-17 V3.1.1 [2017-02)
EN 62479:2010
EN 60065:2014
RoHS - 2011/65/EU
The product bears CE mark, applied in 2018
Name: George Barbu
Function: General manager
Date: 13-11-2018
Signed:
Place: Bucharest