Bach Bluetooth Soundbar
TLL161161
User Manual
Product description
1. Power ON/OFF / Line IN Mode : Press and hold to
power on/off. Short press to toggle between Line IN
Mode and Bluetooth® mode.
2. Vol - : Press and hold for previous track. Short
press to decrease volume.
3. Vol + : Press and hold for next track. Short press to
increase volume.
4. Play/Pause, Answer Call, Mode Selection:
When playing audio, short press to play; short press
again to pause; press and hold to unpair current
audio device.
When receiving a call, short press to answer; short
press again to hang up.
When in Line IN Mode, press and hold to switch to
Bluetooth®.
5. LED indicator
6. Micro-USB charging port
7. 3.5mm audio Line IN port
8. Reset
9. Microphone
Package includes: Bach Wireless Speaker, USB
cable, AUX 3.5mm audio cable
Technical specifications:
• BT version: 4.2
• Working range: 10 meters
• Hands-free call: Yes
• AUX port: Yes
• Music playing time: 6 hours
• Rated power: 10W RMS
• Drivers size: 2" x 2
• Impedance: 4Ω
• Signal to Noise ratio (SNR): ≥70dB
• Battery: 2000mAh
• Device size: 36.8cm x 6.2 cm x 6.2 cm
• Device weight: 790 grams
LED indicator:
Flashing blue: pairing mode
Slowly flashing blue: Bluetooth connected / Line IN
mode active
Solid red: speaker is charging
LED off: charging complete
Power ON/OFF / Bluetooth® set up:
Place the speaker next to your Bluetooth® enabled
1 4
3
2
5
7
68
9
device.
Press and hold the Power button. You will hear a tone
notification and the blue LED will flash quickly to
indicate pairing mode.
Using your Bluetooth audio device, select “Tellur
Bach” from the list of available Bluetooth devices.
A tone notification will be heard and the blue LED will
flash slowly to indicate pairing was successful.
Press and hold the Power button to turn off the
speaker.
Charging the speaker:
Charge for 2 hours minimum prior to first use.
Insert the Micro-USB cable into the charging port (6)
of the speaker.
Insert the opposite USB end into a compatible 5V
adapter or a computer's USB port.
Red LED ON = Charging
Red LED OFF = Charging complete
Safety precautions:
1. Read all the instructions before using the product.
2. Do not use on an aircraft or in a hospital.
3. To reduce the risk of injury, close supervision is
necessary when the product is used near children.
4. Do not expose the device to any moisture.
5. Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit
unpredictable behavior, resulting in fire, explosion or
risk of injury.
6. Do not disassemble the device. Take it to a
qualified service operator when service or repair is
required. Incorrect reassembly may result in a risk of
fire or injury.
7. Do not expose the device to fire or excessive
temperatures. Exposure to fire or temperatures
above 212ºF may cause explosion.
8. Have servicing performed by a qualified service
operator. This will ensure that the safety of the
product is maintained.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product,
battery, literature or packaging reminds you that all
electronic products and batteries must be taken to separate
waste collection points at the end of their working lives; they
must not be disposed of in the normal waste stream with
household garbage. It is the responsibility of the user to
dispose of the equipment using a designated collection point
or service for separate recycling of electrical and electronic
equipment waste (WEEE) and batteries according to local
laws. Proper collection and recycling of your equipment helps
ensure EEE waste is recycled in a manner that conserves
valuable materials and protects human health and the
environment. Improper handling, accidental breakage,
damage, and/or improper recycling at the end of its life may
be harmful for health and environment.
Declaration of conformity
We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest,
Sector 1, Marinarilor street, nr. 31, we declare on
own responsibility that the products below:
Product description: Soundbar Bluetooth Tellur Bach, 10W
Brand: Tellur | Product code: TLL161161
Does not endanger life, health, work safety, does not have a
negative impact on the environment and
corresponds to the standards stated in the manufacturer's
declaration of conformity.
The products are compliant with the following standards and
/ or other normative documents:
RED – 2014/53/EU
Applied standards:
ETSI EN 301 489-1 V2.1.1:2017
ETSI EN 301 489-17 V3.1.1:2017
ETSI EN 300 328 V2.1.1:2016
EN 62479:2010
LVD – 2014/35/EU – EN 60065:2014
RoHS – 2011/65/EU
The product bears CE mark, applied in 2018
Name: George Barbu Signed:
Functia: General manager
Place and date:
Bucharest, 07-12-2018
/
