PRO SIGNAL PSG3441 Operating instructions

  • Hello! I'm your chat assistant. I've reviewed the datasheet for the PRO-SIGNAL HDMI Switch PSG3441. This device allows you to connect multiple HDMI sources to a single display, with support for high resolution video and various HDR formats. I'm ready to answer your questions about its features and capabilities.
  • What video resolution is supported?
    What power supply does the switch use?
    How can I control the switch?
PSG3441
3x1 HDMI 2.0 SWITCH 4:4:4
1
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
The 18Gbps 3 by 1 HDMI Switcher can switch any of 3 HDMI sources to 1 HDMI
display.
Supported video resolution is up to 4K2K@50/ 60Hz YCbCr 4:4:4.
The product supports HDR, HDR10, Dolby Vision and HLG.
Support 3D video format.
The switch has low power consumption 5VDC via USB.
It can be controlled by the panel button and also via remote control.
1× HDMI 3×1 Switcher
1× IR Receiver Cable
1× 5V USB Power Cable
1× Remote Control
1× User Manual
Please read these inructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
FEATURES
2
1HDMI Input Connect to HDMI source devices such as DVD player or PS3
with an HDMI cable.
2Indicator LED The corresponding LED will illuminate when the HDMI input port
connects an active source device.
3 Source Switch Press this button to switch HDMI source signal for the HDMI
output.
4HDMI Output Connect to one HDMI display device such as HDTV or Monitor
with an HDMI cable.
5 DC 5V input DC 5V power input connector.
6IR extender
connector Connect IR Receiver cable to receive the remote control signal.
Remote Control
3
Press IN1/IN2/IN3 button to select the HDMI source signal to
output display, and the corresponding LED will illuminate.
Press this button to cycle through input source to output
display.
INSTALLATION
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.0
4
SPECIFICATIONS
HDCP Compliance HDCP 2.2/1.x
Video Bandwidth 18Gbps
Video Resolution Up to 4k2k@60Hz
Colour Depth 8-bit (4K60Hz)
Colour Space RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:4:4
HDMI Audio Formats PCM2.0/5.1/7.1CH, Dolby 5.1, DTS 5.1, Dolby True
HD, DTS-HD Maer Audio
ESD Protection Human body model—±8kV (Air-gap discharge)
&±4kV (Contact discharge)
Input Ports 3×HDMI Type A (19-pin female) 1×IR IN
[3.5mm Stereo Mini-jack]
Output Ports 1×HDMI Type A (19-pin female)
Dimensions 87mm (W) × 59.5mm (D) × 19mm (H)
Weight 60g
Power Supply Input: 5V/1A 1.5W
Operating Temperature 0°C ~ 4C / 32°F ~ 104°F
Storage Temperature -20°C ~ 6C / -F ~ 140°F 20~90% RH
MAINTENANCE
Clean the outside plaic casing with a soft cloth lightly moiened with mild soap and
water. Never use any abrasive or solvents.
/