Labgear HDS5K User guide

Type
User guide
4k 5 Way HDMI Switch
HDS5K
Gbps
@60Hz
4:4:4
lossless
User Guide
General Safety
• This product is for indoor use only, do not expose to rain, moisture, very
high and low temperatures, strong magnetic fields and dusty
environments
• Disconnect power to the units before cleaning. Do not use abrasives or
solvents to clean the surface of the unit, wipe with a clean soft cloth
• Do not disassemble any of the units in this kit they contain no user
serviceable parts. Refer servicing to qualified personnel only.
• Install the unit in a location with adequate ventilation.
Introduction
The Labgear 5 way switch is designed to connect up to 5 HDMI sources to
your HDMI display and switch to any one of them instantly using the press
button switch on the unit or the remote control supplied.
Supports video resolutions up to 4K2K@50/60Hz YCbCr 4:4:4.
The product also supports HDR, HDR10, Dolby Vision, HLG and
all 3D video formats.
Box contents
• 1x HDMI 5 to 1 Switch
• 1x IR Receiver Cable
• 1x 5V USB Power Cable
• 1x Remote Control
• 1x User Guide
2
3
Feature Function
HDMI INPUT
(1/2/3/4/5)
Connect to HDMI source devices such as DVD players
or games consoles with HDMI cables.
INPUT LEDs
1/2/3/4/5
The corresponding LED will illuminate when the HDMI
input port connects an active source
SWITCH button Press this button to switch HDMI source signal for the
HDMI OUTPUT.
HDMI Connect to one HDMI display device such as HDTV or
Monitor with an HDMI cable.
DC 5V DC 5V power input
IR IN Connect IR Receiver cable to receive the remote
control signal.
Features and functions
ULTRAHD
HDS5K HDMI 5 Way Switch
HDMI V2.0, HDCP 2.2, 18GBps, 4k/60Hz 4:4:4, HDR
INPUT
1
2
IN 2
3
IN 1 IN 3
SWITCH IN 4 IN 5
5
4
1
4
2
3
6
5
1 1
Remote Control
4
IN1/IN2/IN3/IN4/IN5:
Press IN1/IN2/IN3/IN4/IN5 button to
switch HDMI source signal to output
display, and the corresponding
LED will illuminate
:
Press this button to cycle through
the input sources to connect
them to the output display.
IN1 IN2 IN3
IN4 IN5
ULTRAHD
HDS5K HDMI 5 Way Switch
HDMI V2.0, HDCP 2.2, 18GBps, 4k/60Hz 4:4:4, HDR
INPUT
1
2
IN 2
3
IN 1 IN 3
SWITCH IN 4 IN 5
5
4
5
DVD, Blu-ray Player or Gaming Console
USB Power
Cable
IR Receiver
TV
Press the SWITCH button or
use the IR remote control to
change the HDMI source
device
Connections
6
Specifications
Technical
HDCP Compliance HDCP 2.2/1.x
Video Bandwidth 18Gbps
Video Resolution Up to 4k2k@60Hz
Color Depth 8-bit (4K60Hz)
Color Space RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:4:4
HDMI Audio Formats PCM 2.0/5.1/7.1CH, Dolby 5.1, DTS 5.1, Dolby True HD,
DTS-HD Master Audio
ESD Protection Human body model - ± (Air-gap discharge) & ±4kV
(Contact discharge)
Connection
Input Ports 5× HDMI Type A (19-pin female)
1×I R IN (3.5mm Stereo Mini-jack)
Output Ports 1× HDMI Type A (19-pin female)
Mechanical
Housing Plastic Enclosure
Dimensions 87mm (W) × 59.5mm (D) × 19mm (H)
Weight 60g
Power Supply Input: 5V/1A
Power Consumption 1.5W
Operation Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
7
HDMI Cable Quality
To ensure optimum results we recommend the use of HDMI V2.0
compliant cables for connecting the input and outputs to the AV
source and the HDMI displays.
Waste electrical and electronic products should not
be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority
for recycling advice.
© Labgear 2021 V1.2
For further information or any queries
please contact
Technical Support:
www.labgear.co.uk/support
Distributed by Labgear, Kingfisher Wharf, London Road, Bedford, MK45 2HP, UK.
Distributed by: Philex Electronic Ireland Ltd., Robwyn House,
Corrintra, Castleblayney, Co. Monaghan, A75 YX76, Ireland.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Labgear HDS5K User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI