Valco baby Car Seat Adapter Operating instructions

Valco baby
Brand
Valco baby
Model
Car Seat Adapter
Category
Strollers
Type
Operating instructions

Valco baby Car Seat Adapter enables the user to attach their car seat of choice onto the Valco baby Latitude stroller. This accessory is designed for convenience and safety, allowing parents to easily transition their baby from the car to the stroller without disturbing their sleep or comfort. The adapter is compatible with most Maxi Cosi car seats, providing a secure and snug fit.

To use the adapter, simply follow the instructions outlined in the manual. Start by removing the canopy from the stroller and reclining the seat. Attach the included straps to the side bars of the stroller and tighten them securely. Place the car seat onto the stroller and ensure it is securely fitted over the front bumper bar. Finally, use the provided Maxi Cosi strap to connect the car seat to the stroller's inner front bar for added stability.

Valco baby Car Seat Adapter enables the user to attach their car seat of choice onto the Valco baby Latitude stroller. This accessory is designed for convenience and safety, allowing parents to easily transition their baby from the car to the stroller without disturbing their sleep or comfort. The adapter is compatible with most Maxi Cosi car seats, providing a secure and snug fit.

To use the adapter, simply follow the instructions outlined in the manual. Start by removing the canopy from the stroller and reclining the seat. Attach the included straps to the side bars of the stroller and tighten them securely. Place the car seat onto the stroller and ensure it is securely fitted over the front bumper bar. Finally, use the provided Maxi Cosi strap to connect the car seat to the stroller's inner front bar for added stability.

Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this
guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all
the warnings and safety guidelines before use.
Important: Please read the following instructions carefully before assembling this prodcut. Retain this
guide in a safe place for future reference.
PRODUCT REFERENCE GUIDE
valco
baby
© Copyright VE 2008
Due to our policy of continuous
product development, this
product is constantly evolving. It
is possible that some features or
procedures outlined here have
changed since this document
was written. If you are unsure
of any procedure shown here,
please contact us via the web
at info@valco.com.au to obtain
the most up to date information
before use. Include the batch
number, which can be found on a
sticker on the frame.
All pictures and diagrams herein
are provided for illustration
purposes only. Actual product,
colour or fabric may vary. VALCO
reserves the right to modify or
alter any specication or colour
without notice or obligation to
modify any product previously
purchased
FURTHER INFORMATION
In North America only
www.valcobaby.com
1800 610 7850
Latitude Car Seat Adaptor
Compatible with most Maxi Cosi Car Seats
WARNINGS
• Be sure to check that all clamps, Velcro and buckles are securely xed and in place before use.
• Check all parts for breakage or fatigue before use. Discontinue immediately if any part is found to be
damaged or broken.
• NEVER leave any child unattended at any time.
• This product is intended for domestic use only. It is not intended for commercial use.
• Always follow car seat manufacturer’s instructions when using car seat.
GRACO/ BRITAX CAR SEAT
ADAPTOR
FIGURE A
1. Begin preparing the Latitude stroller for the Car Seat
by removing the canopy (hood), from the stroller, and
reclining the seat to its fully reclined position.
2. Locate the extra Male and Female straps, included with
your original purchase.
FIGURE B
3. Select a strap to secure around the side bar of the
Latitude stroller.
FIGURE C
4. Fit the strap around the side bar of the Latitude stroller.
FIGURE D
5. Slip the strap through the ‘opening’ of the metal loop at
the end of the strap.
IMPORTANT WARNING: ALWAYS TEST THAT ALL
STRAPS ARE SECURELY ENGAGED BEFORE USE.
A
B
C
D
Female Buckle
Male Buckle
Seat Reclined
Select a strap to secure to stroller
Wrap the strap around side bar
FIGURE E
6. Once strap is through the metal loop, pull plastic end up
to tighten, and secure on stroller.
7. Repeat process outlined in Figures B to E on other side
bar of stroller, with the other strap.
FIGURE F
8. Place car seat in seat portion of the stroller.
TIP: BE SURE THAT SEAT IS FULLY RECLINED.
FIGURE G
9. Be sure car seat is securely tted over the front bumper
bar, and in the stroller seat.
TIP: YOU MAY WANT TO ADJUST THE FRONT BUMPER BAR
FOR MOST SECURE FIT.
FIGURE H
10. Locate a Male/Female strap attached to side of stroller.
11. Slip strap through the car seat belt hooks on the side of
the car seat.
12. Repeat with the other strap.
13. Insert Male clip into its Female counterpart and buckle.
14. Adjust straps to tighten around car seat.
E
F
H
G
Pull up to tighten
Secure on stroller
Insert Car Seat
Secure seat over front bar
Loop buckles through car seat
belt hooks, and secure buckle.
valco
baby
FIGURE I
15. Once car seat is secured, turn stroller so you are facing
the car seat front.
FIGURE J
16. Remove the Maxi Cosi strap, purchased seperately,
from packaging.
FIGURE K
17. Locate the inner front bar of the car seat (FIGURE K).
18. Wrap the strap around the bar in an UNDER, OVER,
UNDER motion until tightly wrapped around the bar.
FIGURE L
19. Once tight, pull the Female clip over the front hook
20. Place Male clip under the front bumper bar
21. Insert the Male clip into the Female clip and buckle
22. Adjust strap to tighten.
I
J
L
K
Remove strap from packaging
1
2
3
4
Secure strap around car seat bar
1
2
1
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Valco baby Car Seat Adapter Operating instructions

Valco baby
Brand
Valco baby
Model
Car Seat Adapter
Category
Strollers
Type
Operating instructions

Valco baby Car Seat Adapter enables the user to attach their car seat of choice onto the Valco baby Latitude stroller. This accessory is designed for convenience and safety, allowing parents to easily transition their baby from the car to the stroller without disturbing their sleep or comfort. The adapter is compatible with most Maxi Cosi car seats, providing a secure and snug fit.

To use the adapter, simply follow the instructions outlined in the manual. Start by removing the canopy from the stroller and reclining the seat. Attach the included straps to the side bars of the stroller and tighten them securely. Place the car seat onto the stroller and ensure it is securely fitted over the front bumper bar. Finally, use the provided Maxi Cosi strap to connect the car seat to the stroller's inner front bar for added stability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents