Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use.

Important: Please read the following instructions carefully before assembling this prodcut. Retain this

guide in a safe place for future reference.

PRODUCT REFERENCE GUIDE

© Copyright VE 2008

Due to our policy of continuous

product development, this

please contact us via the web

at info@valco.com.au to obtain

the most up to date information

before use. Include the batch

number, which can be found on a

sticker on the frame.

All pictures and diagrams herein

are provided for illustration

purposes only. Actual product,

colour or fabric may vary. VALCO

In Australia/New Zealand

www.valco.com.au

www.valco.co.nz

In North America only

www.valcobaby.com

1800 610 7850

Latitude Car Seat Adaptor

Compatible with most Graco and Britax Car Seats

A

B

C

D

FIGURE A

1. Begin preparing the Latitude stroller for the Car Seat

Adaptor by removing the canopy (hood), from the stroller,

and reclining the seat to its fully reclined position.

2. Locate the extra Male and Female straps, included with

your original purchase.

FIGURE B

the end of the strap.

IMPORTANT WARNING: ALWAYS TEST THAT ALL

STRAPS ARE SECURELY ENGAGED BEFORE USE.

E

F

H

G

FIGURE E

6. Once strap is through the metal loop, pull plastic end up

to tighten, and secure on stroller.

7. Repeat process outlined in Figures B to E on other side

bar of stroller, with the other strap.

FIGURE F

8. Place car seat in seat portion of the stroller.

TIP: BE SURE THAT SEAT IS FULLY RECLINED.

10. Locate a Male/Female strap attached to side of stroller.

11. Slip strap through the car seat belt hooks on the side of

the car seat.

12. Repeat with the other strap.

13. Insert Male clip into its Female counterpart and buckle.

14. Adjust straps to tighten around car seat.