2. Channel Vision
  3. IR-5000

Channel Vision IR-5000 User manual

  • Hello! I am an AI chatbot trained to assist you with the Channel Vision IR-5000 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Besuretheemitterisattached
directlyoverthecomponent’s
IRreceiver. TolocatetheIR
receiver,shineaflashlightinto
theunitandlookforthesensor.
HowIRrepeatingworks
AB-500
Tx Batt
Rew<< Play>
FF
>>
Learn
Stop
Paus
e
1 2
3
4
5
6
7 8 9
0
Pow
er
-/--
Ch
Vol
Learn
Error
AllOff
OffSele
ct
Tuner
CD Sat
VC
R
DV
D
TV
Channel Vision
TM
Pointan
IRremotecontrol
attheIRreceiver
TheIRreceiveriswiredto
theIRhubwhichroutesthe
signaltoIRemitters
CDplayer
Andtheemitter
repeatstheIRsignal
infrontofthecomponent.
Specifications: (typical)
PowerSupplyVoltage:
IRFreq.rangesupported:
IRpickuprange:
IRreceiverheaddimensions:
IRemitteroutputs:
Color:
8-12VDC
30kHz-60kHz
40ft.@38kHz,25ft.@56kHz
0.65” x0.35” x0.25”
4
Black
Specificationssubjecttochangewithoutnotice.
TheIR-5000includestheseitems:
500-149revD
LEDStatusindicators:
PowerandIRdata
4-IRemitterholsters
2-IR-3002emitters
Powersupply
1-IRreceiverholster
1-holemount
1-tabletopmount
IRreceiverhead
4IRemitteroutputs
DCPowerinput
36”
Features:
!
!
!
!
PlasmaProofIRreceiver
4IRemitters
StatusLEDsforpowerandIRsignalindication
Versatilemountingaccessoriesincluded
0.4 0.2 0 0.2 0.4
0.6
0.6
0.9
1.0
0.8
0.7
d
rel
– Relative Transmission Distance
10º 20º
30º
40º
50º
60º
70º
80º
0º
Underidealconditions,
rangesof>40feetare
possible.
DirectivityofIRSensor
TheeffectivereceivedistanceofallIRreceiverschanges
whentheIRremotecontrolisnotdirectlyinfrontoftheIR
sensor.
ThegraphbelowdescribestheperformanceoftheIRsensor
deviceusedinthisChannelVisionIRreceiver.Pleasenote
thatthegraphbelowmarksthedistanceasapercentageof
themaximumdistance.Soat0º,thedistanceis1.0(or100%)
andat30º,thedistanceis0.7(or70%)andsoon.
Actualtransmissiondistancesaredependentuponfrequency
ofremotecontrol(40kHzhasmaxrange)andluminosityof
remotecontrol(i.e.Someremotesarebrighterthanothers.)
CAUTION: DONOT attempttocutorextendthis
wire.Doingsowillpreventtheunitfromworking.
Channel Vision Technology will repair or replace any defect in material or
workmanship which occurs during normal use of this product with new or
rebuilt parts, free of charge in the USA, for one year from the date of original
purchase. This is a no hassle warranty with no mail in warranty card needed.
This warranty does not cover damages in shipment, failures caused by other
products not supplied by Channel Vision Technology, or failures due to
accident, misuse, abuse, or alteration of the equipment. This warranty is
extended only to the original purchaser, and a purchase receipt, invoice, or
other proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling (800)
840-0288 toll free. A Return Authorization number must be obtained in
advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights
(which vary from state to state). If a problem with this product develops
during or after the warranty period, please contact Channel Vision
Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life
sustaining or critical environment applications. Channel Vision customers
using or selling Channel Vision products for use in such applications do so at
their own risk and agree to fully indemnify Channel Vision for any damages
resulting from such improper use or sale.
1
IR-5000
USERSGUIDE
All-In-One
IRSystem
Drilla3/4” .hole
PushtheIRreceiverhead
throughthehole.
PushtheIRreceiverhead
throughtheholeinthe
tabletopmount.
MounttheIRreceivertothe TVoronasurfacewithinlineofsight
ofyourremotecontrol.
Removethebackingfromthetapeandattachthe
IRreceiverholsterinthedesiredlocation.
Removethebackingfromthetapeandattachthe
IRemitterholsterovertheIRsensorofthedevice
youwishtocontrol.
SnapIRreceiverheadintotheholster
asshown.
SnapIRemitterintotheholster
asshown.
PushtheIRreceiverhole
mountandIRreceiverhead
backintothehole.
PushtheIRreceiverhole
mountandIRreceiverhead
backintotheholeinthetabletop
mount.
Tosecurethemount,remove
thebackingfromthefoamtape
onthebottomoftheunitand
attachthemounttoanyflatsurface.
InserttheIRreceiverhead
intotheIRreceiverholemount.
InserttheIRreceiverhead
intotheIRreceiverholemount.
CDplayer
MountingtheIRreceiver:Option1-Usingtheholster
MountingtheIRreceiver:Option3-UsingthetabletopmountMountingtheIRreceiver:Option2-Usingtheholemount
MountingtheIRemitter
/