XClear TT000089 User guide

Brand
XClear
Model
TT000089
Category
Screen protectors
Type
User guide

This manual is also suitable for

XClear TT000089 is a screen protector designed to protect your Galaxy S20 Plus smartphone's screen from scratches and damage. The protector is made of a durable material that is resistant to everyday wear and tear, and it is also easy to apply and remove. Additionally, the XClear TT000089 protector comes with an alignment mount to ensure a precise fit, and it also includes a dust absorber sticker to remove any dust or dirt from the screen before application.

XClear TT000089 is a screen protector designed to protect your Galaxy S20 Plus smartphone's screen from scratches and damage. The protector is made of a durable material that is resistant to everyday wear and tear, and it is also easy to apply and remove. Additionally, the XClear TT000089 protector comes with an alignment mount to ensure a precise fit, and it also includes a dust absorber sticker to remove any dust or dirt from the screen before application.

GALAXY S20 PLUS
Screen Protector
Scraper
Alignment Mount
Stopper
Cleaning Wipes
Dust Absorber
Sticker
IMPORTANT! PLEASE REMOVE CASE BEFORE INSTALLATION
1. Use wet wipe to remove any dirt or
liquid from screen.
2. Use dry wipe to remove any left
over dirt from screen.
3. Dab the dust-absorber sticker to
remove any dirt or dust from screen.
Product Overview
Installation
1/3
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
Note: Guarantee there is no gap between your
phone and the alignment mount. You will hear
a “clicking” sound when attached properly.
Note: Make sure Support Mount is
attached firmly to a solid flat surface
and the phone cannot slip.
Peel off
Flip and stick to the table
Align your phone to the Stopper
4. Tear tape off Stopper and stick it to a flat surface.
Place edge of smartphone against the Stopper.
5. Insert Alignment Mount into bottom of smartphone.
Ensure it’s snug.
6. Align the 3 holes of the screen protector into the 3
grooves of the Alignment Mount. Align screen
protector to Galaxy S20 Plus camera as well.
7. Press down on “Paste Start Line”, lift up tab 1, and use scraper to
press down and away to attach screen protector.
2/3
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
Note: Do not use the scraper in a vertical
direction when applying the screen protector
to the curved surfaces of your phone.
8. Lift up tab 2 and detach Alignment Mount,and
rotate smartphone.
9. Lift up tab 2, press down on “Paste Start Line”, and use scraper to
press down and away to attach screen protector.
FAQ
Q: The screen protector is emitting a strong chemical-like smell. What is it and how long does it take to go away?
A:The smell comes from the glue of the protector and is normal for the attachment process. The smell will fade after a few
days.
Q: Can I manually peel off the protective film instead of using the scraper?
A: No. You cannot peel off the layers of protective film by hand. Instead, you must use the scraper as detailed within the
user manual. (WARNING: IF YOU PEEL BY HAND, IT WILL CAUSE PERMANENT AIR BUBBLES).
Q: What if I still see air bubbles?
A: Use the scraper to push air bubbles to the edges of the sccreen. Air bubbles may last up to 24 hours then disappear.
10. Peel off top film. 11. Use scraper to align screen protector to your screen. Properly align
all curved edges of the screen. Use scraper to push out any air bubbles
into corners of the screen.
3/3
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
X CLEAR
  • Page 1 1
  • Page 2 2
  • Page 3 3

XClear TT000089 User guide

Brand
XClear
Model
TT000089
Category
Screen protectors
Type
User guide
This manual is also suitable for

XClear TT000089 is a screen protector designed to protect your Galaxy S20 Plus smartphone's screen from scratches and damage. The protector is made of a durable material that is resistant to everyday wear and tear, and it is also easy to apply and remove. Additionally, the XClear TT000089 protector comes with an alignment mount to ensure a precise fit, and it also includes a dust absorber sticker to remove any dust or dirt from the screen before application.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents