Accessory Power Go Grppve BlueBar User manual

Brand
Accessory Power
Model
Go Grppve BlueBar
Category
Soundbar speakers
Type
User manual

This manual is also suitable for

INSTRUCTION MANUAL
TM
BlueBa r
1 -Power LED indicator
2- Power/Play button
3- Volume +/- buttons
4- Forward/Back buttons
5- 3.5mm line-in port
6- Charging port
7- Microphone
8- Silicone ear gels-
3 set sizes
9- 3.5 mm plug
Product Diagram
What’s in the box?
Thank you for purchasing the GOgroove™ BlueBar™ clip-on Bluetooth®
adapter. BlueBar utilizes Bluetooth A2DP technology to equip any head-
phones with Bluetooth! Convenient features such as a hands free mic, play-
back controls, and volume adjustment give you access to your mobile device
from up to 30 feet away. The long lasting internal rechargeable battery
gives you over 8 hours of talk time and 100 hours of standby time. For your
convenience and listening pleasure, the BlueBar comes with our GOgroove™
AudiOHM™ ergonomic earbuds! The GOgroove BlueBar is ready to take your
audio experience into the future, right now.
a- BlueBar Bluetooth adapter
b- AudiOHM earbuds
c- USB charging cable
a
b
1
4
2
3
57
6
c
8
9
BUTTON PRESS FUNCTION
Hold 5 seconds Power ON/OFF
Hold 8 seconds Pairing Mode
Press Answer/End Call
Hold 2 seconds Reject Incoming Call
Hold 2 seconds Redial Last Number
Press Play/Pause Track
Press Previous Track
Press Next Track
-
Press Volume Down
+ Press Volume Up
Setting up the BlueBar
1- Charging- Connect the (c) USB charging cable into a powered USB port. Plug
the barrel end of the (c) USB charging cable into the (6) Charging port on
the BlueBar. The (2) Power LED indicator will illuminate to indicate power  ow.
2- Connect the included (b) AudiOHM earbuds (9) 3 .5mm plug into the (5) 3.5mm
line-in port on the BlueBar and power it on.
3- Powering the BlueBar ON/OFF
a. To power ON- Press and hold the (2) Power/Play button for 5 seconds. You will
hear a short tone and the (1) Power LED indicator lights will  ash brie y. When
the BlueBar is ON, the (1) Power LED indicator will  ash blue periodically.
b. To power OFF- Press and hold the (2) Power/Play button for 5 seconds. You will
hear two short tones and the (1) Power LED indicator lights will  ash brie y.
Function chart
Operating Instructions:
Pairing your mobile Bluetooth device to the BlueBar
Pairing instructions may di er depending on the device you are using. Please
refer to your device’s user manual for further information.
1- Make sure that your mobile device is within at least 3 feet of the BlueBar when
trying to pair.
2- Start with the BlueBar turned OFF. Press and hold the (2) Power/Play button
until the (1) Power LED indicator ashes alternating red and blue. The BlueBar is
now in PAIRING MODE.
3- Access the Bluetooth settings in your mobile device and select SEARCH/SCAN
FOR DEVICES. Your mobile device will begin to search for a Bluetooth signal.
4- You will see the name BLUEBAR appear in the device list. Select it to pair, and
if a password or PIN is needed enter the numbers “0000”. ***You may have to then
select BlueBar and press “CONNECT”.
5- After a successful connection has been made, you will hear a short tone and
the (1) Power LED Indicator will begin to  ash blue.
Playing music
1- Make sure that your Bluetooth A2DP enabled device is paired with the BlueBar.
2- Simply begin playing music on your device and you should hear the music
play through the AudiOHMs. Adjust volume, using the (3) Volume +/- buttons.
3- You can control music playback via the BlueBar with any AVRCP (audio/video
remote control pro le) enabled device. To play or pause brie y press the
(2) Power/Play button. You can control track playback with the (4) Forward/Back
buttons.
Hands-free calls
The BlueBar is equipped with a (7) Microphone for hands-free calling. When
receiving a call you will hear a tone through your headphones.
1- Answer a call- Press the (2) Power/Play button
2- End a call- Press the (2) Power/Play button
3- Reject an incoming call- Press and hold the (2) Power/Play button for 2 seconds
4- Redial last number called- Press and hold the (2) Power/Play button 2 seconds
Operating Instructions (continued):
Using the BlueBar with other devices
Other headsets- The BlueBar can be used with any headphones or earbuds
that have a 3.5mm plug. Just insert your headphone’s 3.5mm plug into the
(5) 3.5mm line-in port on the BlueBar.
Adapting a speaker system for Bluetooth
The BlueBar can also be connected to speaker systems with a 3.5mm input.
Connect the BlueBar via 3.5mm cable (not included) to the 3.5mm AUX input
on your speaker. Pair your mobile device with BlueBar and begin playing
music. You will hear music come through your speaker system when correctly
connected.
Why can’t I get the BlueBar to pair with my mobile device?
a) Please make sure BlueBar is in PAIRING MODE and that (1) Power LED indicator
lights are  ashing. If not, please turn o the BlueBar and start from the beginning
of Pairing your mobile Bluetooth device to the BlueBar instructions.
Why can’t I play music via Bluetooth using my mobile device?
a) Please make sure that your Bluetooth mobile phone supports A2DP (advanced
audio distribution pro le) connection, and that it has been paired properly.
b) Please make sure only one device is paired to the BlueBar at a time. When you
disconnect a device from the BlueBar you will hear two short tones.
Why can’t I hear any sound?
a) Please make sure that the BlueBar is fully charged and powered ON. When the
BlueBar is ON the (1) Power LED indicator will  ash blue periodically.
b) Please make sure that the volume on your mobile device and the BlueBar are
loud enough.
c) Make sure that your mobile Bluetooth device is within 30 feet of the BlueBar.
The maximum Bluetooth range may vary in di erent environments, or with
di erent mobile devices.
Troubleshooting:
©
2011 ACCESSORY POWER
All trademarks and brand names are the property of their owners
- Please only use this product in the manner described in this manual.
- Please keep out of the reach of children.
- Do not expose the unit to dust, water, or extreme temperatures.
- Do not attempt to disassemble the product.
Cautions:
Product Speci cations (BlueBar)
Bluetooth version: 2.1
Bluetooth pro le: A2DP
Bluetooth frequency range: 2.4GHz-2.48GHz
Operating distance: 30 feet
Charging time: 2-3 hours
Talk time: 8+ hours
Standby time: 100+ hours
Power: AC110v
Input: Standard 3.5mm audio plug
Dimensions: 075 x 0.62 x 2 inches (18 x 15 x 50 mm)
Weight: .35oz (10 grams)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Accessory Power Go Grppve BlueBar User manual

Brand
Accessory Power
Model
Go Grppve BlueBar
Category
Soundbar speakers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents