Your easy-to-use reference for getting the most out of your product
Enjoy
USER GUIDE
FREE REGISTRATION
WHAT’S IN THE BOX
PRODUCT DIAGRAM
Thank you for purchasing the
SMARTmini™AUX
Bluetooth® Audio Receiver
It’s easy to equip any 3.5mm AUX enabled car or home stereo with
Bluetooth audio and hands-free calling capability. The on-board
microphone, swivel head design and 6-hour battery life makes this
device worthy of any high-tech gadget arsenal. Pair up and plug in
using these simple instructions.
3.5mm plug
Velcro mounting pad
Power button
Microphone
SMARTmini™AUX
AUX mount
USB charging cable
Charging port
BUTTON FUNCTIONS
CHARGING
Connect the SMARTmini AUX to a powered USB port using the
included USB charging cable. Allow 1-2 hours for a full charge. The
Power button light will turn o once fully charged.
Button Action Bluetooth Mode
Power Press and hold for 6
seconds
Answer / Hang up call,
Pause / Play Track
Press and hold for 2
seconds
ON / OFF, Enter Pairing
Mode
Activates voice dialing
for voice enabled
phones. Functionality
may vary.
Press
STREAM MUSIC AND HANDS-FREE CALLS
1) Insert the 3.5mm plug into the AUX line-in port on your
sound system.
2) If your system requires it, switch the audio input source to play from
the AUX line-in port. System settings may vary, so please consult
your system’s user manual.
POWER, PAIRING, AND AUTO-CONNECT
1) Make sure the SMARTmini AUX is o . Enter “Pairing Mode” by
pressing and holding the Power button for 6 seconds. The Power
button will blink red and blue rapidly.
2) On your audio device, nd “SMARTmini AUX” in your Bluetooth
menu. Select it for pairing. If required, use PIN: 0000.
3) Auto-Connect can be performed with the last paired device. Turn
on SMARTmini AUX by pressing and holding the Power button for
2 seconds. When powered on, press the Power button once and it
will automatically reconnect with your audio device if Bluetooth
is enabled.
Peel back the adhesive backing on the Velcro mounting pad and
place the AUX mount on your dashboard or desired surface. Connect
the SMARTmini AUX to the AUX Mount and insert the 3.5mm plug
into the AUX line-in port on your sound system.
MOUNTING
-Make sure that SMARTmini AUX is fully charged before use.
-Pairing instructions may vary by device.
-Adjust volume settings on your audio source and your stereo system.
-To turn the SMARTmini AUX o , press and hold the Power button.
-You can also charge SMARTmini AUX using a standard AC or DC
USB charger.
USEFUL TIPS
3) Adjust volume and play audio from your PAIRED device. You will
hear the audio come through your sound system speakers. Sound
can be regulated by both your audio device and sound system
independently.
STREAM MUSIC AND HANDS-FREE CALLS CONTINUED
For more on the SMARTmini AUX
+ tips and tricks please visit
AccessoryPower.com/videos
© 2012 Accessory Power.
Accessory Power. All rights reserved. Accessory Power, the Accessory Power logo, and GOgroove
and the GOgroove logo, and SMARTmini are registered trademarks of Bright Ideas, Inc. The Blue-
tooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Bright Ideas, Inc. is under license.
All trademarks and logos are property of their respective owners.
Manufactured in China. Designed in California.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
2. Changes or modi cations not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Bluetooth version: 2.1+EDR
Bluetooth pro le: HSP, HFP,
A2DP and AVRCP
Bluetooth frequency range:
2.4GHz – 2.48GHz
Operating distance: 30 feet
Charging time: 1.5 hours
Audio Playback: 6 hours per charge
Power: USB 5V
Output: Standard 3.5mm
audio plug
Dimensions: 2.62 x 1.5 x .81 inches
(66.55 x 38.1 x 20.57 mm)
Weight: .45 oz (12.76 grams)
TECHNICAL SPECIFICATIONS
/
