Mackie Serial-9 Installation guide

Mackie
Brand
Mackie
Model
Serial-9
Type
Installation guide

This manual is also suitable for

Mackie Serial-9 - Product Information

Mackie Serial-9 is a dual communication card for the HDR24/96. It replaces the existing MIDI card and offers both MIDI (MTC and MMC) and Sony 9-Pin communication with external devices like remote controllers and DAWs (Digital Audio Workstations).

The device has two 9-pin connectors, one for MIDI and one for Serial 9-Pin connections. The Serial 9-Pin connection is an RS-422 port that supports the Sony® 9-Pin device protocol.

The device can be configured to operate as either a device (controlled by a controller) or as a controller (controlling another device). It has a green LED indicator for device mode and a red LED indicator for controller mode.

Mackie Serial-9 - Product Information

Mackie Serial-9 is a dual communication card for the HDR24/96. It replaces the existing MIDI card and offers both MIDI (MTC and MMC) and Sony 9-Pin communication with external devices like remote controllers and DAWs (Digital Audio Workstations).

The device has two 9-pin connectors, one for MIDI and one for Serial 9-Pin connections. The Serial 9-Pin connection is an RS-422 port that supports the Sony® 9-Pin device protocol.

The device can be configured to operate as either a device (controlled by a controller) or as a controller (controlling another device). It has a green LED indicator for device mode and a red LED indicator for controller mode.

Installation Guide
for the HDR24/96
Serial•9Serial•9
Serial•9Serial•9
Serial•9
Dual Communication Card for the HDR24/96
IRQ
J2
J1
IRQ2/9
IRQ3
IRQ4
IRQ5
IRQ7
IRQ10
IRQ11
IRQ12
IRQ15
JB2
JB1
U2
C21
+
U3
R5 R4 R3
U1
U5
U4
U7
U8
Serial 9 Pin Card
U6
I/O BASE
ADDRESS
BASE4
BASE5
BASE6
BASE8
C4
JP2
JP3
DEVICE
DEVICE
CONTROLLER
JP4
JP5
JP1
C22
C5
C18
C6
R1 R2
R9
C3
C24
+
+
+
C23
+
C1
L3
L2
R10
C10
C2
D1
D3
D2
C11
R11
R14
C17
C19
C20
C14
C12
C15
C13
R12
C16
R13
C7
R6
C8
R8
Y1
Y2
R15
L5
L6
L4
L7
R7
L1
C9
+
2
Serial•9
Serial•9
1. Read instuctions — Read, understand and follow all safety and
operating instructions before using this Mackie product.
2. Retain Instructions — Keep these safety and operating
instructions for future reference.
3. Heed Warnings — Follow all warnings on this Mackie product
and in these operating instructions.
4. Disconnect the power source to the HDR24/96 before installing
the Serial•9 Card.
5. Servicing — Do not attempt to service this Mackie product. All
servicing should be referred to the Mackie Service Department.
Important Safety Instructions
Part No. 0000808 Rev. A 07/02
© 2002 Mackie Designs Inc. All rights reserved.
Printed in the U.S.A.
Introduction
Thank you for choosing Mackie Designs for your
hard disk recording solution. The Serial•9 is a major
step forward in our continued support of the
HDR24/96 Hard Disk Recorder.
The Serial•9 replaces the existing MIDI card in
the HDR24/96, and offers both MIDI (MTC and
MMC) and Sony 9-Pin communication with external
devices like remote controllers and DAWs (Digital
Audio Workstations).
No additional setup is required. Just plug the
Serial•9 in and you’re ready to go!
ATTENTION: The installation of this option requires opening the
HDR24/96 and handling sensitive electronic components. Anti-static
precautions
must
be taken in order to prevent potential damage to
the unit. Damage caused to the unit due to improper installation or
handling of these components
will not be covered under warranty
.
If you do not feel capable of performing this installation, please
call Mackie Tech Support at 800-898-3211 to obtain a referral to
a service center that can perform the installation.
R
E
W
I
N
D
F
A
S
T
F
W
D
P
L
A
Y
S
T
O
P
R
E
C
O
R
D
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
S
E
L
E
C
T
O
N
P
O
W
E
R
L
O
C
2
L
O
C
1
S
T
O
R
E
L
O
O
P
1
–
2
R
E
C
S
A
F
E
A
U
T
O
T
A
K
E
T
-
C
O
D
E
C
H
A
S
E
T
R
A
C
K
D
E
L
E
T
E
L
A
S
T
P
R
O
J
E
C
T
B
A
C
K
U
P
D
I
S
K
U
T
I
L
S
Y
S
T
E
M
D
I
G
I
-
I
/
O
S
Y
N
C
D
E
C
I
N
C
A
U
T
O
I
N
P
U
T
A
L
L
I
N
P
U
T
2
4
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
61
5
1
4
1
3
1
21
11
0
9
87
6
5
4
3
21
24
23
22
21
2
0
19
18
17
16
1514
1312
11
10
9
8
7
6
5
4
32
1
H
D
R
2
4
/
2
4
T
R
A
C
K
/
2
4
B
I
T
D
I
G
I
T
A
L
A
U
D
I
O
H
A
R
D
D
I
S
K
R
E
C
O
R
D
E
R
/
E
D
I
T
O
R
H
I
G
H
R
E
S
O
L
U
T
I
O
N
A
U
D
I
O
4
4
.
1
/
4
8
/
9
6
K
S
A
M
P
L
E
R
A
T
E
S
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
R
E
C
9
6
M
I
N
U
T
E
S
H
O
U
R
S
S
E
C
O
N
D
S
F
R
A
M
E
S
T
I
C
K
S
B
E
A
T
S
B
A
R
S
4
4
.
1
k
V
A
R
I
4
8
k
2
4
B
I
T
E
R
R
O
R
9
6
k
1
6
B
I
T
T
C
C
L
O
C
K
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
O
L
2
4
7
1
0
1
5
2
0
2
5
3
0
3
5
4
0
5
0
PROJECT: Little love
PLAYLIST: Playlist 1
DRIVE: C:Internal
AVAIL: 01:35:00
Important: You must have
version 1.3 or higher of the
HDR24/96 OS in order to use the
Serial•9. Follow the installation
instructions with the software
upgrade to install the new
software.
Installing the Serial•9
Important: The Serial•9
contains static-sensitive
components. Anti-static
precautions must be taken before
opening the anti-static bag and
handling the Serial•9. Use an
anti-static wrist strap when performing this installation.
These are available at most computer supply stores.
The use of an anti-static mat is also recommended.
1) Turn off the HDR24/96 and remove the AC
linecord from the socket on the rear panel.
We don’t want this to be a shocking
experience for you!
2) Remove 22 screws from the HDR24/96 cover
using a #2 Phillips screwdriver (4 screws
from the top panel, 4 screws from each side,
and 10 screws from the rear panel). These
screws are all one size.
3) Remove the cover by lifting it up at the back
and pulling up and away from the front of the
unit.
3
Installation Guide
Installation Guide
4) Remove the Phillips-head screw securing the
MIDI card. Save the screw for installing the
Serial•9 card.
REAR PANEL
FRONT PANEL
REAR PANEL
®
MACKIE DESIGNS. ™
© 2000
4) Remove Screw from
MIDI card bracket
5) Remove the MIDI card by gently lifting up on
the card and bracket to remove it from the
socket on the board.
REAR PANEL
FRONT PANEL
REAR PANEL
®
MACKIE DESIGNS. ™
© 2000
5) Remove MIDI card
6b) Install Screw into
Serial•9 card bracket
6a) Gently press the Serial•9
card into the slot
6) Install the Serial•9 card in the MIDI slot.
Secure it into place with the Phillips-head
screw.
7) Replace the cover, reinstall the screws, and
you’re ready to go!
Making the Connections
MIDI Connection
The MIDI connection on the Serial•9 card is the
same as the MIDI connection on the MIDI card it is
replacing. Simply connect the supplied MIDI
breakout cable to the bottom 9-pin connector on the
Serial•9 card, and connect the 5-pin MIDI IN and
MIDI OUT connectors to your MIDI interface.
Serial 9-Pin Connection
The Serial 9-Pin connection on the Serial•9 card
is an RS-422 port that supports the Sony
®
9-Pin
device protocol. Connect the upper 9-pin connector
to any industry standard Sony 9-Pin controller or
device using a DB9 male to DB9 male serial computer
cable (available at most computer supply outlets).
Note: Make sure your Sony 9-Pin controller or
device accepts a male DB9 connector.
The Serial•9 card is shipped configured to
operate as a device (DEV); that is, to connect to a
controller and be controlled. This is indicated by the
green LED on the Serial•9 card.
It is possible to configure the Serial•9 to be the
controller (CONT), to control another device. Simply
move the five jumpers (JP1–JP5) on the Serial•9
card as shown in the illustration below to configure
the card as a controller. This is indicated by the red
LED on the Serial •9 card.
Note: HDR24/96 software version 1.3
supports only device (DEV) protocol for the
Serial•9. Please refer to the Software
Release Notes, which can be found on Mackie
website’s HDR24/96 software downloads
page, for complete information on the support
of Serial•9 for all software versions.
Serial•9 Device/Controller Configuration
IRQ
J2
J1
IRQ2/9
IRQ3
IRQ4
IRQ5
IRQ7
IRQ10
IRQ11
IRQ12
IRQ15
I/O BASE
ADDRESS
DEVICE
CONFIGURATION
CONTROLLER
CONFIGURATION
DEVICE/CONTROLLER
CONFIGURATION JUMPERS
SERIAL•9MIDI
BASE4
BASE5
BASE6
BASE8
JP2
JP3
DEVICE
DEVICE
CONTROLLER
JP4
JP5
JP1
JP2
JP3
DEVICE
CONTROLLER
JP4
JP5
JP1
JP2
JP3
DEVICE
CONTROLLER
JP4
JP5
JP1
Specifications
MIDI
Electrical Interface: MIDI 1.0 Specification
Data Rate: 31.25 kb/sec
Pinout:
MIDI
OUT
1
13
54
2
13
54
2
5
6
9
MIDI
IN
MIDI Breakout Cable
MIDI
9-Pin Function
1 MIDI OUT Pin 4
2
3
4
5 MIDI IN Pin 4
6 MIDI OUT Pin 5
7
8
9 MIDI IN Pin 5
Shell MIDI OUT Pin 2
Serial Device Controller
9-Pin Function Function
1 Frame Ground Frame Ground
2 Transmit A (–) Receive A (–)
3 Receive B (+) Transmit B (+)
4 Receive Common Transmit Common
5 N/C N/C
6 Transmit Common Receive Common
7 Transmit B (+) Receive B (+)
8 Receive A (–) Transmit A (–)
9 Frame Ground Frame Ground
“Mackie,” the “Running Man” figure, and “Serial•9”
are trademarks or registered trademarks of Mackie
Designs Inc. All other brand names mentioned are
trademarks or registered trademarks of their
respective holders, and are hereby acknowledged.
© 2002 Mackie Designs Inc.
All Rights Reserved.
Printed in the U.S.A.
Serial 9-Pin
Electrical Interface: EIA RS-422-A
Data Rate: 38.4 kb/sec
Parity: Odd
Data Bits: 8
Stop Bits: 1
Indicators: Green LED (Device)
Red LED (Controller)
Pinout:
16220 Wood-Red Rd. NE • Woodinville, WA 98072 • USA
US & Canada: 800/898-3211
Europe, Asia, Central & South America: 425/487-4333
Middle East & Africa: 31-20-654-4000
Fax: 425/487-4337 • www.mackie.com
E-mail: [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Mackie Serial-9 Installation guide

Mackie
Brand
Mackie
Model
Serial-9
Type
Installation guide
This manual is also suitable for

Mackie Serial-9 - Product Information

Mackie Serial-9 is a dual communication card for the HDR24/96. It replaces the existing MIDI card and offers both MIDI (MTC and MMC) and Sony 9-Pin communication with external devices like remote controllers and DAWs (Digital Audio Workstations).

The device has two 9-pin connectors, one for MIDI and one for Serial 9-Pin connections. The Serial 9-Pin connection is an RS-422 port that supports the Sony® 9-Pin device protocol.

The device can be configured to operate as either a device (controlled by a controller) or as a controller (controlling another device). It has a green LED indicator for device mode and a red LED indicator for controller mode.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents