WAGO Digital output module 24VDC / 2.0A User manual

Pos: 2 /Dokumentation allgemein/Einband/Einband Handbuch - Fronts eite 20 15 - mit Doc Var iabl en ( Sta ndar d) @ 9\ mod_1285229289866_0.docx @ 64941 @ @ 1

WAGO-SPEEDWAY 767

Manual

767-4803/000-800

8DO 24V DC 2.0A IF (8xM8)

Digital Output Module 24 V DC / 2.0 A

Version 1.1.0

Pos: 3 /A lle Ser ien ( All ge mein e M odul e)/ Hin weis e z ur D oku men tati on/I mpr ess um für Sta ndar dh and büch er - al lg. A ngabe n, Ansc hrifte n, Telef onn ummer n und E-Mai l-A dresse n @ 3\mod_1219151118203_21.docx @ 21060 @ @ 1

2 WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail: [email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

=== Ende der Lis te f ür T e xtmar ke Ei nb and _vor ne = ==

WAGO-SPEEDWAY 767 Table of Contents 3

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 5 /D ok ument ati on al lg em ein/V erz eic hni sse /Inh alts ver zei chni s - Ü bersc hrift oG und Ver zeich nis @ 3\mod_1219151230875_21.docx @ 21063 @ @ 1

Table of Contents

1 Notes about this Documentation ................................................................. 6

1.1 Validity of these Operating Instructions ................................................... 6

1.2 Copyright ................................................................................................... 6

1.3 Symbols ..................................................................................................... 7

1.4 Number Notation ....................................................................................... 9

1.5 Font Conventions ...................................................................................... 9

2 Important Notes ......................................................................................... 10

2.1 Legal Bases ............................................................................................. 10

2.1.1 Subject to Changes ............................................................................. 10

2.1.2 Personnel Qualification ...................................................................... 10

2.1.3 Use in Compliance with Underlying Provisions ................................ 11

2.1.4 Technical Condition of Specified Devices ......................................... 11

2.2 Safety Advice (Precautions) .................................................................... 12

2.3 Safety Equipment .................................................................................... 13

2.4 Notes on Operation ................................................................................. 14

3 Device Description ..................................................................................... 15

3.1 Connectors ............................................................................................... 16

3.2 Marking Possibilities and Fastening ....................................................... 17

3.3 Display Elements .................................................................................... 18

3.4 Labeling ................................................................................................... 19

3.5 Schematic Diagram ................................................................................. 21

3.6 Dimensions .............................................................................................. 22

3.7 Technical Data ........................................................................................ 23

3.7.1 General Information ........................................................................... 23

3.7.2 Supply ................................................................................................. 23

3.7.3 Communication .................................................................................. 23

3.7.4 Outputs ............................................................................................... 24

3.7.5 Information on Selecting the Actuator ............................................... 25

3.7.6 Influence of Operating States on Output ............................................ 25

3.7.7 Configurable Functions ...................................................................... 26

3.7.8 Diagnostics ......................................................................................... 26

3.7.9 Process Image ..................................................................................... 26

3.7.10 Display Elements ................................................................................ 26

3.7.11 Isolation .............................................................................................. 26

3.8 Approvals ................................................................................................ 27

3.9 Standards and Guidelines ........................................................................ 28

4 Mounting ..................................................................................................... 29

4.1 Information on Mounting ........................................................................ 29

4.2 Tools and Accessories Required for Mounting ....................................... 31

4.3 Direct Mounting on Your System ........................................................... 32

4.4 Mounting on a Carrier Rail (only with WAGO Accessories) ................. 33

4.4.1 Fastening the Carrier Rail Adapter to the Module ............................. 33

4.4.2 Fastening the Module with Carrier Rail Adapter to a Carrier Rail .... 34

4.5 Mounting on a Profile Rail (only with WAGO Accessories) ................. 35

4.5.1 Fastening the Profile Adapter to the Module ..................................... 35

4 Table of Contents WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

4.5.2 Fastening the Module with Profile Adapter to a Profile Rail ............. 36

4.6 Marking and Replacing the Marking Spaces .......................................... 37

4.7 Mounting the Spacer in the Case of Compact Arrangement ................... 38

5 Connecting Data and Supply Cables ........................................................ 40

5.1 Notes ....................................................................................................... 40

5.2 Required Accessories .............................................................................. 41

5.3 Connecting the S-BUS Cables ................................................................ 42

5.4 Connecting the Supply Cable .................................................................. 44

5.5 Connecting the Actuator Cable ............................................................... 46

6 Commissioning ........................................................................................... 48

7 Parameterizing ........................................................................................... 49

7.1 Electronic Type Label ............................................................................. 51

7.2 Diagnostic Overview ............................................................................... 52

7.3 Parameters of Outputs ............................................................................. 54

7.4 Global Settings ........................................................................................ 56

7.5 Automatic Storage of System Parameters ............................................... 57

7.6 Updating the Firmware ........................................................................... 57

8 Process Image ............................................................................................. 58

8.1 Output Data ............................................................................................. 59

8.2 Input Data ................................................................................................ 61

9 Diagnostics .................................................................................................. 63

9.1 LED Signaling ......................................................................................... 63

10 Service ......................................................................................................... 66

10.1 Updating the Firmware ........................................................................... 66

10.2 Replacing the Module ............................................................................. 66

10.2.1 Disconnecting the Cables ................................................................... 66

10.2.2 Removing the Module from Your System ......................................... 67

10.2.3 Removing the Module from the Carrier Rail ..................................... 67

10.2.4 Removing the Module from the Profile Adapter ................................ 68

10.2.5 Connecting the Module ...................................................................... 68

10.3 Disposal ................................................................................................... 68

11 Use of the Interference-Free Module in Safety Applications ................. 69

11.1 Important Notes ....................................................................................... 69

11.2 General Measures and Conditions for the Power Supply

Solution of the Module ............................................................................ 70

11.3 Measures and Conditions for Shielded Power Supply

of the Module .......................................................................................... 72

11.4 Measures and Conditions for Unshielded Power Supply

of the Module .......................................................................................... 73

11.5 Connection of the Module to Safety Switching Devices ........................ 74

11.5.1 General Structure of a Potential Group .............................................. 74

11.5.2 Examples of Connection.................................................................... 75

12 Appendix ..................................................................................................... 76

12.1 Diagnostic Information ........................................................................... 76

List of Figures ...................................................................................................... 77

WAGO-SPEEDWAY 767 Table of Contents 5

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

List of Tables ........................................................................................................ 78

=== Ende der Lis te f ür T e xtmar ke V erz eic hnis _vor ne == =

6 Notes about this Documentation WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 7 /A lle Ser ien ( All ge mein e M odul e)/ Über sc hrif ten für all e Ser ie n/Hi nwei se zur D o kume nt ation /Hi nw eise zu dies er D o kume ntati on - Ü b ersc hrif t 1 @ 4 \mod_1237987661750_21.docx @ 29029 @ 1 @ 1

1 Notes about this Documentation

Pos: 8 /S eri e 76 7 ( WAGO- SPEEDWAY)/Hinweise zur Dokumentation/Hin weis e z ur D oku me ntati on I/O-M odul e 7 67- xxxx @ 5\mod_1248172015859_21.docx @ 38666 @ @ 1

The module shall only be installed and operated in conjunction with these

operating instructions and the system description.

Pos: 9 /S erie 76 7 (WAGO -SP EED WAY) /Wi chti ge Erl äu ter ung en/Si cher hei tshi n weis e/W arn ung /Warn ung : R ele ase N ot es beac hten @ 8\mod_1278912368761_21.docx @ 59530 @ @ 1

Observe release notes!

Please note that, within the SPEEDWAY system, a function is provided without

restriction only if all system's components have the same system-wide firmware

release. Therefore, always observe the appropriate release notes on products used.

Pos: 10 /S eri e 7 67 ( WA GO-S PEED WAY)/ Wichti ge Erlä uteru ngen/ Sich erheits hin weise/ Achtu ng/ Achtung : Vers orgu ngsaus legung @ 8\mod_1278912433448_21.docx @ 59533 @ @ 1

Supply layout!

In addition to these operating instructions, you will need the “WAGO

SPEEDWAY 767, System Description and Information” manual, which can be

downloaded at www.wago.com. There you will find information regarding supply

layout, etc.

Pos: 11 /A ll e Ser ien (Al lg emei ne M od ule)/ Hi nweis e zur D okumentation/Hinweise/Hinweis: Dokumentation aufbewahren @ 4\mod_1237987339812_21.docx @ 29026 @ @ 1

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation

during the entire service life of the product. Pass on the documentation to any

subsequent user. In addition, ensure that any supplement to this documentation is

included, if necessary.

Pos: 12 /S eri e 7 67 ( WA GO-SPEEDWAY)/Hinweise zur Dokumentation/Gültigkeit Dokumentation I/O-Modul 767-xxxx @ 5\mod_1248172494859_21.docx @ 38679 @ 2 @ 1

1.1 Validity of these Operating Instructions

These operating instructions are only applicable to the WAGO SPEEDWAY 767

Series module 8DO 24V DC 2.0A IF (8xM8), 767-4803/000-800.

Pos: 13.1 /All e Seri en ( All ge meine Mo dul e)/H in weis e zur D oku ment ati on/U rh eber sc hutz aus führ lic h @ 4\mod_1235565145234_21.docx @ 27691 @ 2 @ 1

1.2 Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any

further use of this Manual by third parties that violate pertinent copyright

provisions is prohibited. Reproduction, translation, electronic and phototechnical

filing/archiving (e.g., photocopying) as well as any amendments require the

written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.

Non-observance will involve the right to assert damage claims.

Pos: 13.2 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-SPEEDWAY 767 Notes about this Documentation 7

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 13.3 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Hi nwei se z ur Dok um enta tio n/S ymbol e - Ü bers chr ift 2 @ 1 3\mod_1351068042408_21.docx @ 105270 @ 2 @ 1

1.3 Symbols

Pos: 13 .4.1 /Al le Seri en ( All ge mei ne Mo dul e)/ Wic htig e Er lä uter ung en/ Sich erh eits- und sonstige Hinweise/Gefahr/Gefahr: _Warnung vor Personenschäden allgemein_ - Erl äuter ung @ 13 \mod_1343309450020_21. docx @ 101029 @ @ 1

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 13 .4.2 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonsti ge Hinw eise/ Gefa hr/Gef ahr: _ Warnu ng vor Per son enschä den durc h elek trisc hen Strom_ - Erläuterung @ 13\mod_1343309694914_21. docx @ 101030 @ @ 1

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will

result in death or serious injury.

Pos: 13 .4.3 /Al le Seri en (All gemei ne Mo dul e)/ Wic htig e Er lä uter ung en/ Sich erh eits- und sons ti ge Hi nw eis e/W arn ung/ War nung : _ War nu ng vor P erso nens ch äde n allg em ei n_ - Erläuterung @ 13\mod_1343309877041_21.docx @ 101035 @ @ 1

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Pos: 13 .4.4 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so nsti ge H inw eis e/V orsic ht /Vor sic ht: _War nu ng vor P ers one nsc häde n al lg emei n_ - Erläuterung @ 13\mod_1343310028762_21. docx @ 101038 @ @ 1

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Pos: 13 .4.5 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Achtung/Achtung: _War nung vor Sac hschäden allgemein_ - Erläuterung @ 13\mod_1343310134623_21.docx @ 101041 @ @ 1

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 13 .4.6 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Achtung/Achtung: _War nung vor Sac hschäden durch elektrostatische Aufladung_ - Erläuterung @ 13\mod_1343310227702_21.docx @ 101044 @ @ 1

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in

damage to property.

Pos: 13 .4.7 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und sonstige Hinweise/Hinweis/Hinweis: _Wichtiger Hinweis allgemein_ - Erläuterung @ 13\mod_1343310326906_21.docx @ 101047 @ @ 1

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in

damage to property.

Pos: 13.4 .8 /All e Serien ( Allg emeine Modul e)/Wic htig e Erläut erung en/Si cherh eits- und sons tig e Hi nwei se/ Inf or mati on/I nfor ma tio n: _ Wei ter e Inf or matio n al lg emei n_ - Erl äuter ung @ 13\ mod_1343310439814_21. docx @ 101051 @ @ 1

8 Notes about this Documentation WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Additional Information:

Refers to additional information which is not an integral part of this

documentation (e.g., the Internet).

Pos: 13.5 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-SPEEDWAY 767 Notes about this Documentation 9

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 13.6 /All e Seri en ( All ge meine Mo dul e)/H in weis e zur Doku mentati on/D arstel lung der Zahl ensys teme - Ü ber schri ft 2 un d I nhal t @ 3\mod_1221059454015_21.docx @ 21711 @ 2 @ 1

1.4 Number Notation

Table 1: Number Notation

Number Code

Example

Note

Decimal

100

Normal notation

Hexadecimal

0x64

C notation

Binary

'100'

'0110.0100'

In quotation marks, nibble separated with

dots (.)

Pos: 13.7 /All e Seri en ( All ge meine Mo dul e)/H in weis e zur D oku ment ati on/S chr ift kon venti o nen - Ü bers chr ift 2 u nd I nhal t @ 3\mod_1221059521437_21.docx @ 21714 @ 2 @ 1

1.5 Font Conventions

Table 2: Font Conventions

Font Type

Indicates

italic

Names of paths and data files are marked in italic-type.

e.g.: C:\Program Files\WAGO Software

Menu

Menu items are marked in bold letters.

e.g.: Save

>

A greater-than sign between two names means the selection of a

menu item from a menu.

e.g.: File > New

Input

Designation of input or optional fields are marked in bold letters,

e.g.: Start of measurement range

“Value”

Input or selective values are marked in inverted commas.

e.g.: Enter the value “4 mA” under Start of measurement range.

[Button]

Pushbuttons in dialog boxes are marked with bold letters in square

brackets.

e.g.: [Input]

[Key]

Keys are marked with bold letters in square brackets.

e.g.: [F5]

Pos: 14 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

10 Important Notes WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 15 /Alle Ser ien (Al lge meine Mo dule)/ Über schrif ten für alle Ser ien/ Wichti ge Erlä uteru ngen/ Wichtige Erläuterungen - Übersc hrift 1 @ 4\mod_1241428899156_21.docx @ 32170 @ 1 @ 1

2 Important Notes

Pos: 16.1 /All e Seri en ( All ge meine Do kum ente) ( All ge meine Mo dule) /Wi cht ige Erl äut eru nge n/Wi chti ge Erl äut eru nge n - Ei nleit ung @ 3\mod_1221059818031_21.docx @ 21717 @ @ 1

This section includes an overall summary of the most important safety

requirements and notes that are mentioned in each individual section. To protect

your health and prevent damage to devices as well, it is imperative to read and

carefully follow the safety guidelines.

Pos: 16.2 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Wi chti ge Erl äuter u ngenR ec htlic he Gr undl ag en - Üb ersc hrift 2 @ 3\ mod_1221060626343_21.docx @ 21726 @ 2 @ 1

2.1 Legal Bases

Pos: 16.3 /All e Seri en ( All ge meine Dokumente) ( Allgemeine Module)/Wichtige Erläuterungen/Änderungsvorbehalt - Übers chri ft 3 un d I nhalt @ 3\mod_1221060036484_21.docx @ 21720 @ 3 @ 1

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any

alterations or modifications that serve to increase the efficiency of technical

progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from

the granting of patents or from the legal protection of utility patents. Third-party

products are always mentioned without any reference to patent rights. Thus, the

existence of such rights cannot be excluded.

Pos: 16.4 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M odul /Pers onalq ualif ikati on 767- xxxx @ 5\ mod_1248175871265_21.docx @ 38705 @ 3 @ 1

2.1.2 Personnel Qualification

All sequences implemented on the module may only be carried out by electrical

specialists with sufficient knowledge in automation. The specialists must be

familiar with the current standards and guidelines for the module and automation

environment.

Pos: 16.5 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

WAGO-SPEEDWAY 767 Important Notes 11

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 16.6 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M od ul/ Besti mmu ngsg emäße V erwe ndung 7 67-48xx @ 5\ mod_1248176459437_21.docx @ 38717 @ 3 @ 1

2.1.3 Use in Compliance with Underlying Provisions

The module 767-4803/000-800 emits digital signals that are specified by a higher-

level controller, e.g., a programmable fieldbus coupler.

Pos: 16.7 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M odul /Bes timmu ngsg emäße V erwend ung 767- IOs all ge mein 1 @ 7\mod_1266322273828_21.docx @ 50731 @ @ 1

The module may not be used to control safety-related functions, i.e. it cannot be a

functional part of a safety function.

Pos: 16.8 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M odul /Bes timmu ngsg emäße V erwend ung 767- DOs 1_ 1 Hi nwei s_R üc kwir kung sfr ei @ 1 1\mod_1317278760144_21.docx @ 79992 @ @ 1

The digital outputs of the module are interference-free to eliminate any impact by

the internal potential groups.

In a safety circuit, the module shall only be used together with a safety switching

device (with diagnostic function).

If additional modules are required, these modules must also be interference-free.

The module itself is no safety-oriented module. Note the "Use of the Interference-

Free Module in Safety Applications" chapter.

Pos: 16.9 /Serie 767 (WAGO-SPEED WAY)/ Wic htige Erl äuter unge n/I/O-M od ul/ Besti mmung sge mäße Ver wend ung 767-I Os allg em ein 2 @ 5 \mod_1248176511796_21.docx @ 38751 @ @ 1

The module may only be operated in combination with components of the WAGO

SPEEDWAY 767 Series.

The module was developed for applications requiring IP 67 (NEMA type 6, 6P)

protection.

Pos: 16.1 0 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul/B esti mmungs gem äße Ver wendu ng 767- xxxx allgemein3 @ 8\mod_1278997190572_21.docx @ 59680 @ @ 1

Applications other than those described in this manual are not permitted.

Pos: 16.1 1 / Alle Ser ie n (All ge mein e D oku ment e) ( All ge mein e M odul e)/ Wich tig e Er lä uter ung en/T ech nisc her Zus ta nd der Ger äte - Ü bers chr ift 3 u nd I nhal t @ 3\mod_1221060446109_21.docx @ 21723 @ 3 @ 1

2.1.4 Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software

configurations, which meet the individual application requirements. WAGO

Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of

changes in hardware or software as well as to non-compliant usage of devices.

Please send your request for modified and new hardware or software

configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Pos: 16.1 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.doc x @ 218 10 @ @ 1

12 Important Notes WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 16.1 3 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/Wi chti ge Erl äut er unge nSi cher heit shi nwei s e - Über s chrif t 2 @ 6\ mod_1260180299987_21.docx @ 46724 @ 2 @ 1

2.2 Safety Advice (Precautions)

Pos: 16 .14 /S erie 767 ( WAG O-SPE ED WAY) /Wi chti ge Erl äuter ung en /Sic her heit shi nwei se /Gef ahr/ Gef ahr: El ektr isc he Spa nnu ng @ 8\ mod_1278307980373_21.docx @ 58901 @ @ 1

Electric voltage!

Operate the 767 Series components exclusively with 24 VDC PELV (Protective

Extra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sources. Failure

to comply may result in electric shock.

Pos: 16.1 5 / Ser ie 7 67 ( WAG O-S PEEDWA Y)/Wic htige Er läuter ungen /Sich erhei tshin weise /Vorsi cht/ Vorsic ht: Heiß e Ansc hluss buch sen @ 8\mod_1278308217203_21.docx @ 58913 @ @ 1

Hot connection sockets!

Even when taking into account derating, high surface temperatures on the metallic

connection sockets and on the enclosure can arise during operation. If the 767

Series component has been in operation, allow it to cool off before moving it.

Pos: 16.1 6 / Ser ie 7 67 ( WAG O-S PEED WA Y)/ Wich tig e Er läu ter ung en/Si ch erh eits hin weis e/Ac ht ung /Acht ung : Hö chs te Str om belas tbar kei t d er V ers org ungs kon takt e @ 8\ mod_1278308653219_21.docx @ 58916 @ @ 1

The highest current carrying capacity of the supply contacts is 4 A!

Always observe the maximum current carrying capacity per supply line (U

LS

, U

A

)

for each 767 Series component and the overall power consumption for all

767 components. Neither of these values shall exceed 4 A since an increase in

current causes the contacts to overheat and damages the 767 Series components.

Information regarding the power demand of each 767 Series component can be

found in the corresponding data sheet, which is available from www.wago.com.

Pos: 16.1 7 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wich tige Erläu ter ung en/S ic herh eits hin wei se/A cht ung /Ac htung : O ff ene Ans chl üss e @ 8 \mod_1278308159953_21.docx @ 58910 @ @ 1

Exposed connections!

If connections have not been closed with protective caps, liquid or dirt can

penetrate the components of the 767 Series module and ruin it. Therefore, close

all unnecessary connections with protective caps, which must be ordered

separately, in order to maintain the IP67 degree of protection. (See section

“Accessories” of the fieldbus coupler/controller manual.)

Pos: 16.1 8 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Sic her hei tshi nw eise 767- xxxx_2 @ 7\mod_1267623532771_21.docx @ 51669 @ @ 1

• Disconnect the power supply from the system on which you wish to mount

the 767 Series device.

• Observe the appropriate accident prevention regulations for your system

during assembly, start-up, maintenance, and repairs. For example, BGV A3,

“Electrical systems and equipment”.

• The operating instructions for the 767 Series module and the system

description must be laid out ready on site.

• Observe the exact positioning (coding) between plug and socket.

• The 767 Series device shall not come into contact with substances having

seeping and insulating properties. Otherwise, additional measures shall be

WAGO-SPEEDWAY 767 Important Notes 13

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

taken for the device, such as installation of an enclosure that is resistant to

the above-mentioned substance properties.

• Electronic components fulfilling the ESD requirements according to the IEC

61000-6-2 are integrated in the 767 device. As higher voltages may occur,

under unfavorable circumstances, due to electrical charge in the field,

discharge must be ensured before performing work on the 767 system.

• Ensure that the potential equalization is correctly laid out.

Pos: 16.1 9 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Sic her hei tshi nw eise 767- xxxx_3 @ 7\mod_1267624103126_21.docx @ 51676 @ @ 1

• Keep all cables a sufficient distance away from electromagnetic sources of

interference in order to maintain a high level of interference resistance of

the 767 system against electromagnetic emissions. Use only shielded cables

at the necessary locations, and always observe the appropriate standards for

EMC-suitable installations.

• For the power supply and for the S-BUS, use only pre-assembled WAGO

system cables, so the specified characteristics of the technical data can be

achieved.

Pos: 16.2 0 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-Mo dul/ Sic her heits hi nwei se 7 67- xxxx_4 @ 7\mod_1267623157545_21.docx @ 51662 @ @ 1

• Replace defective or damaged modules (e.g., deformed connections), else

function disruptions can occur in the respective fieldbus stations or nodes.

• When laying any cables, make sure that you do not lay them within the

shear range of movable machine parts.

• For each activity, observe the corresponding personnel qualification in the

corresponding section.

• Observe the marking on the front and rear side of the module.

Pos: 16.2 1 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul/S icher heits einri chtu ngen 76 7-xxxx @ 7\mod_1268142379773_21.docx @ 52055 @ 2 @ 1

2.3 Safety Equipment

All 767 Series products are designed to meet the requirements of IP67. This

includes complete protection against accidental contact with electrical voltage and

currents – even when wet.

Pos: 16.2 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

14 Important Notes WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 16.2 3 / Ser ie 7 67 ( WAG O-SPEEDWAY )/Wic htig e Erläuter ung en/I/ O-Modul /H inw eise z um Bet ri eb 7 67-xxxx, Teil 1 @ 7\mod_1266921815843_21.docx @ 51219 @ 2 @ 1

2.4 Notes on Operation

When integrating the 767 module in your machine or system, all the currently

applicable norms, regulations and guidelines shall be observed during all

activities: for example, BGV A3, “Electrical systems and equipment”,

DIN EN 418, EN 60204. The emergency stop equipment shall remain effective in

all operating modes of the system and machine.

For protection from electromagnetic interferences

• Connect your system to protective earth (PE), and

Pos: 16.2 4 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Hi nwei se zum Betr i eb 7 67-I/O , Teil 2 @ 5\mod_1248180225875_21.docx @ 38755 @ @ 1

• Ensure that the cable routing and the installation of the fieldbus cable, S-

BUS cable, supply cable, and sensor or actuator cable are correct.

Pos: 16.2 5 / Ser ie 7 67 ( WAG O-S PEED WAY)/ Wichti ge Erl äuter ungen /I/O-M odul /Hi nwei se zum Betr i eb 7 67-xxxx, Teil 3 @ 7\mod_1266921848140_21.docx @ 51 222 @ @ 1

The following elements for 24 V supply shall be present:

• Outer lightning protection on buildings

• Inner lightning protection of supply lines and signal lines

• Safe electrical separation of low voltage 24 VDC through PELV (Protective

Extra Low Voltage) or SELV (Safety Extra Low Voltage) voltage sources

Pos: 17 /Doku ment ation all gemei n/Gli eder ungsel eme nte/---Seit en wechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

WAGO-SPEEDWAY 767 Device Description 15

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 18.1 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en für alle S erien/G eräte besc hreib ung/G eräte beschr eib ung - Über schr ift 1 @ 3\mod_1233756084656_21.docx @ 27096 @ 1 @ 1

3 Device Description

Pos: 18.2 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/I /O-Mo dule/ Gerät ebes chrei bung 7 67-48x x St an dard @ 5\ mod_1248412361437_21.docx @ 38974 @ @ 1

The digital output module 767-4803/000-800 is used to control solenoid valves,

gates, transmitters, relays or other electrical loads. The module has many

parameterization options that can be carried out via a fieldbus coupler. In addition,

diagnostic messages for individual channels and for the entire module can be

parameterized.

Use a fieldbus or FDT-DTM as, for example, with the WAGOframe to make

module settings. Detailed information about assignment of module parameters

using a fieldbus can be found in the corresponding manual.

Detailed information regarding the properties of the module is available in

Section "Technical Data".

Pos: 18 .3 /Dok ume ntatio n allge mein/ Glieder ungs elem ente/---Seite nwec hsel--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

16 Device Description WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 18.4 /All e Seri en ( All ge meine Mo dul e)/Ü bers chr ift en f ür alle S erie n/Ger äte bes chr eib ung /Ans chl üss e - Üb ersc hrift 2 @ 4\ mod_1240984262656_21.docx @ 31961 @ 2 @ 1

3.1 Connectors

Pos: 18 .5 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nschl üss e/I /O-Mo dule/ Ansc hlüss e 767-xxxx 8 xM8-Versor gu ngsei ng ang - Bild @ 16\mod_1374817418012_21.docx @ 127050 @ @ 1

Figure 1: Connectors (exemplary)

Pos: 18.6 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nsc hlüs se/I /O-M odule/ Leg ende An schlus s 767-xxxx S-BU S @ 5\ mod_1248847875187_21. docx @ 39167 @ @ 1

Table 3: Legend for figure "Connectors"

Position

Description

Function

1

S-BUS input

M12 plug, B-coded

For transmitting data from previous 767

Series components.

2

S-BUS output

M12 socket, B-coded

For transmitting S-BUS data to the next

767 Series components or to the S-BUS

terminator.

Pos: 18.7 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bung /Ans chl üss e/I /O-Mo dule/ Lege nde Ansc hluss 7 67-4xxx DO 8xM8 @ 5\mod_1248847874578_21.docx @ 39163 @ @ 1

3

Digital outputs X1 – X8

M8 socket

For connecting digital actuators (e.g.,

solenoid valves or gates).

Pos: 18.8 /Serie 767 (WAGO-SPEED WAY) /Ger ät ebesc hrei bu ng/A nsc hlüs se/I /O-M odule/ Leg ende An schlus s 767-x xxx Vers orgu ng, nur 48 03 und 4 804 @ 5\mod_1249021985000_21.docx @ 39616 @ @ 1

4

Supply input

M12 plug, A-coded

For feeding in both U

LS

(logic and sensor

supply) and U

A

(actuator supply).

5

Supply input

M12 plug, A-coded

Pos: 18.9 /Dokumentation allgemein/Gliederungselemente/---Seite nwechs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

1

2

4

3

5

WAGO-SPEEDWAY 767 Device Description 17

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 18 .10 /S erie 767 ( WAG O-SPEEDWAY)/Gerätebeschreibung/Befestigung/I/O-Module/Beschriftung und Befestigung 767- xxxx_8xM8 - Bild @ 5\mod_1248845069421_21.docx @ 39114 @ 2 @ 1

Beschr ift ung smög lich keit en

3.2 Marking Possibilities and Fastening

Figure 2: Marking possibilities and fastening (exemplary)

Pos: 18.1 1 / Ser ie 7 67 ( WAG O-SPEEDWAY)/Gerätebeschreibung/Befestigung/I/O-Mo dule/L egend e zu Bes chrif tung un d Befes tigu ng 767-xxxx @ 5\mod_1249475777546_21.docx @ 40514 @ @ 1

Table 4: Legend for figure "Marking possibilities and fastening"

Position

Description

Function

10

Module marker card

For identifying the module within a

fieldbus node.

11

Mounting holes

With integrated function earth (FE) socket

for fastening and grounding the module.

12

Marker strips

For identifying inputs.

Pos: 18.1 2 /D ok um entati o n allg em ein/ Gli eder ung sel eme nte/---S eit enw echs el--- @ 3\ mod_1221108045078_0.docx @ 21810 @ @ 1

10

11

12

11

18 Device Description WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 18.1 3 / Alle Ser ie n (All ge mein e M odul e) /Üb ersc hri ften für all e S eri en/G erät ebes chr ei bung /An zeig eel em ent e - Ü bersc hri ft 2 @ 4\mod_1240984390875_21.docx @ 31964 @ 2 @ 1

3.3 Display Elements

Pos: 18.1 4 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Anz eig eel emen te 767- xxxx_IO_8 xM8 - Bil d @ 5 \mod_1248848990156_21.docx @ 39175 @ @ 1

Figure 3: Display elements (exemplary)

Pos: 18 .15 /S erie 767 ( WAG O-SPE ED WAY)/ Gerä tebe schr eib ung /Anz eig eel ement e/I /O-M odul e/L ege nde zu A nz eigeel e ment e 7 67-x xxx, P os. 15+1 6: Stat us SB und F @ 5\ mod_1248854485718_21.docx @ 39190 @ @ 1

Table 5: Legend for figure "Display elements"

Position

LED

Color

Meaning

15

SB

Green/red/orange

S-BUS status

16

F

Red

Diagnostic information

Pos: 18.1 6 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Leg en de zu Anz eig eel em ente 767- 48x x, P os. 17: St atus D O @ 5 \mod_1248855317609_21.docx @ 39200 @ @ 1

17

0 … 7

Yellow/red

Information on outputs

Pos: 18.1 7 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/A nzei geel eme nte/ I/O-M od ul e/Leg en de zu Anz eig eel em ente 767- xxx x, Pos. 1 8+19: St atus U A und ULS @ 7\mod_1268053208570_21. docx @ 51957 @ @ 1

18

U

A

Green

Actuator supply is present.

19

U

LS

Green

Logic supply and sensor supply are

present.

Detailed information

Detailed information can be found in section "Diagnostics" > "LED Signaling".

Pos: 18.1 8 /D ok um entati o n allg em ein/Gl i ederu ngsel e ment e/---Seit enw echs el--- @ 3 \mod_1221108045078_0.docx @ 21810 @ @ 1

15

17

16

17

19

18

WAGO-SPEEDWAY 767 Device Description 19

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 18.1 9. 1 /Al le S eri en ( Allg em ein e Mo dul e)/Ü ber schr ift en f ür al l e Ser ien/ G erät ebesc hr eib ungB edr uck ung - Über schr ift 2 @ 4\mod_1241082409515_21.docx @ 32035 @ 2 @ 1

3.4 Labeling

Pos: 18.1 9. 2 /S erie 767 ( W AGO -SPE EDW AY) /Ger äte beschr ei bung /Bedr uc kung /I/O- Mod ul e/Be druc ku ng 7 67-4 803 - Bild @ 5\mod_1248860318125_21.docx @ 39337 @ @ 1

Figure 4: Labeling (exemplary)

Pos: 18.1 9. 3 /S erie 767 ( W AGO -SPE EDW AY) /Ger äte beschr ei bung /Bedr uc kung /I/O- Mod ul e/Leg en de z ur B edr uc kung 767- 480 3/-4 804 @ 5\mod_1249023593234_21.docx @ 39620 @ @ 1

Table 6: Legend for figure "Labeling"

Position

Description

30

Manufacturer's mailing address

31

Connection assignment of S-BUS

32

Connection assignment of outputs

33

Connection example

34

Connection assignment of supply input

35

Information on approvals and CE marks

36

Unambiguous identification of module

37

Item number

Pos: 18.1 9. 4 /D oku ment ati on al lge mei n/Gl ied eru ngs ele ment e/---S eiten wec hs el--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

36

33

31

30

37

34

35

32

20 Device Description WAGO-SPEEDWAY 767

767-4803/000-800 8DO 24V DC 2.0A IF (8xM8)

Manual

Version 1.1.0

Pos: 18 .19. 5 /Serie 76 7 (WAG O-SPE EDW AY) /Ger äte beschr ei bung /B edruc kung /I/O -Mod ule/B edruc kung seitli ch @ 7\mod_1267620827007_21.docx @ 51647 @ @ 1

On the side of the module is a label, with information that would prove useful in

the case of a complaint:

• BA: Work order number (40)

• SN: Serial number (40)

• Manufacturing number (41)

Pos: 18.1 9. 6 /S erie 767 ( W AGO -SPE EDW AY) /Ger äte beschr ei bung /Bedr uc kung /I/O- Mod ul e/Be druc ku ng sei tl ich - Bild @ 5\mod_1248864035578_21.docx @ 39357 @ @ 1

Figure 5: Label on the module

Pos: 18.2 0 / Ser ie 7 67 ( WAG O-S PEED WAY )/G eräte bes chr eibu ng/B edr uckung /I /O-M odul e/B edr uck ung sei tlic h - Legende @ 9\mod_1286969974465_21.docx @ 65601 @ @ 1

Table 7: Description of manufacturing number

Abbreviation

Description

WW

Week of production

JJ

Year of production

FW

Firmware release index

When updating the firmware, please note that, the firmware

release index may not be conformed to the printed firmware

release index on the side of the fieldbus coupler. The “Electronic