Groupe Brandt DHK8000 Owner's manual

FR GUIDE D’UTILISATION

ES MANUAL DE UTILIZACION

EN GUIDE TO INSTALLATION

DE BETRIEBSANLEITUNG

PT GUIA DE UTILIZAÇAO

NL GEBRUIKSAANWIJZINGEN

IT GUIDA D’INSTALLAZIONE

LOREM IPSUM

HOTTE DÉCORATIVE

CAMPANA EXTRACTORA DECORATIVA

DECORATIVE HOOD

DEKOR-DUNSTABZUGSHAUBE

EXAUSTOR DECORATIVO

DESIGNAFZUIGKAP

CAPPA DECORATIVA

Typo : Arial

Couleur : blanc

Corps : 12 pts

Typo : Times New Roman italique

Couleur : noir 70 %

Corps : 36 pts

Typo : Arial

Couleur : noir 70 %

Corps : 12 pts

Couleur de fond : noir 70 %

C = 0 / M = 0 / J = 0 / N = 70

FR GUIDE D’UTILISATION

ES MANUAL DE UTILIZACION

EN GUIDE TO INSTALLATION

DE INSTALLATIONSANLEITUNG

PT GUIA DE INSTALAÇÃO

NL INSTALLATIEHANDLEIDING

IT GUIDA D’INSTALLAZIONE

PL PRZEWODNIK INSTALACYJNY

SK INŠTALAČNÝ NÁVOD

RU РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

DK INSTALLATIONSVEJLEDNING

SV INSTALLATIONSGUIDE

EL ΟΔΗΓΙΕΣ ΕΓΚΑΤΑΣΤΑΣΗΣ

CS NÁVOD K POUŽITĺ

DHD7960B

HOTTE DÉCORATIVE

CAMPANA EXTRACTORA DECORATIVA

DECORATIVE HOOD

DEKOR-DUNSTABZUGSHAUBE

EXAUSTOR DECORATIVO

HOOD DECORATIEVE

CAPPA DECORATIVA

DEKORACYJNY OKAP KUCHENNY

DEKORAČNÝ ODSÁVAČ PAR

ДЕКОРАТИВНАЯ ВЫТЯЖКА

DEKORATIV HÆTTE

DEKORATIV FLÄKTKÅPA

ΔΙΑΚΟΣΜΗΤΙΚΟΣ ΑΠΟΡΡΟΦΗΤΗΡΑΣ

ODSAVAČ

Page is loading ...

TABLE OF CONTENTS

WARNINGS

• Important precautions ______________________________

• Electrical risk ____________________________________

• Asphyxia risk ____________________________________

• Fire risk _________________________________________

• Installing the hood _________________________________

• Description of the appliance _________________________

1 / INSTALLING THE HOOD

• Useful advice ____________________________________

• Use ____________________________________________

• Filtering version ___________________________________

• Grease lter removal - charcoal lter installation _________

• Connecting the hood to power supply __________________

• Electrical connection _______________________________

2 / HOW THE HOOD WORKS ___________________________

3 / CLEANING THE HOOD ______________________________

4 / OPERATIONAL ANOMALIES __________________________

5 / AFTER-SALE SERVICE ______________________________

6 / ENVIRONNEMENT

• Care for the environment _____________________________

33

34

35

36

38

39

41

42

43

32

EN

Important: These warnings are also available at the De

Dietrich brand website.

Please follow all the instructions given below , before installing

and using your appliance.

They have been written down for ensuring your personal sa-

fety and the safety of other people, as well. Keep these instruc-

tions for use with the appliance . Should the appliance be sold

or passed on to others, please make sure these warnings are

passed on with it.

- Constantly seeking to improve our products, we hereby hold

the right to modify their technical, operational and aesthetic

features in line with any new technical innovation available.

- We suggest you to take note of the appliance technical de-

tails/ references in the “Consumers’ Service ” page, so that you

can easily nd then when necessary.

The manufacturer declines any liability for possible pro-

blems, damages or re caused by not abiding to the in-

structions specied in this manual.

- IMPORTANT PRECAUTIONS

- This appliance has been designed for personal use in the

household environment. Never use the appliance for commer-

cial or industrial use or for purposes other than its intended

use.

- Take the appliance immediately out of its packaging on de-

livery, or ask the courier to do it for you. Check the appliance

overall conditions. Write down any claims on the delivery note,

and take a copy of it .

- The appliance can be operated by children over the age of

8 and by people with impaired physical , sensorial and mental

faculties or without the necessary experience and competence

only if properly supervised and if they had been duly provided

with the necessary instructions concerning the safe use of the

appliance and informed of the potential associated risks.

Children shall not be allowed to play with the appliance.

Cleaning and maintenance operations on the appliance shall

not be performed by children without adults’ supervision.

33

WARNINGS

-Caution: Accessible parts of the hood may become hot

when used with cooking appliance.

- Use only the screws provided with the appliance during in-

stallation . The use of other screws may cause electrical or me-

chanical problems. Caution: Failure to use screws and xing

devices in compliance with the instructions specied in this

manual, may result in electrical risk. The use of accessories

which are not provided with the appliance is not recommended.

- ELECTRICAL RISK

- Disconnect any power supply circuits before reaching the

connecting terminals. In case the power cord is damaged, it

shall be replaced by either the manufacturer , the technical

assistance service or qualied personnel in order to avoid any

kind of risks.

- Electrical disconnection can be done by using an accessible

socket or by providing xed pipes with a breaker, in accordan-

ce with the installation instructions.

- Do not alter or try to alter the technical features of the applian-

ce, as it might be very dangerous.

- Repairs on the appliance shall be performed by authorized

technicians only.

- Always disconnect the appliance from power supply before

carrying out any cleaning and maintenance operation.

- Never use steam/ or high pressure devices to clean the ap-

pliance (precautions connected to electrical safety).

- ASPHYXIA RISK

- Standards concerning air- exhaust methods should be com-

plied with. The ducting system for this appliance must not be

connected to any existing ventilation system which is being

used for any other purpose such as discharging exhaust fumes

from appliances burning gas or other fuels (this does not apply

to appliances conveying only air into the room).

- The room where the appliance is installed must be properly

ventilated, when the kitchen hood is used together with other

gas combustion devices or powered by other fuels (this does

not apply to appliances conveying only air into the room).

- FIRE RISK

- It is not allowed to cook food over open ames (ambè coo-

king) and operate gas hobs without pots or pans on them (the

ames sucked into the hood might damage the appliance).

34

35

- Frying under the appliance shall be done under constant su-

pervision as overheated oils and fats may ignite.

- Respect the guidelines for the cleaning and replacement of

grease lters. Accumulated grease deposits represent a re

risk.

- The use of the appliance over ames produced by fuels (wood

or coal) is not allowed.

WARNING:

Place the metal box containing the electrical components at

minimum distance of 65 cm from the gas hob, in any case at

65 cm form the hood suction area.

WARNING:

We recommend to place the metal box containing the electro-

nic components at a distance of at least 10 cm from the ground

and at a safe and proper distance from any heat source (e.g.

oven or hob side).

INSTALLING THE HOOD

Installation shall be performed in compliance with any applicable standards on the

ventilation of enclosed spaces. In France, these requirements are specied in DTU

61.1 issued by CSTB.

In particular, the air collected shall not be conveyed into any existing ventilation sy-

stem which is being used for any other purpose such as discharging exhaust fumes

from appliances burning gas or other fuels . The use of disused ducts is not allowed,

except upon approval by a qualied technician.

DESCRIPTION OF THE APPLIANCE

• 1 HOW TO INSTALL THE HOOD

In order to ensure the Downdraft pro-

per operation, installation instruc-

tions shall be carefully followed.

Useful Advice:

- Use an air exhausting pipe whose ma-

ximum length does not exceed 5 meters.

- Limit the number of elbows in the pi-

ping, since each elbow reduces the air

capacity of 1 linear meter. (Ex. : if you

use no. 2 x 90 ° elbows, the length of

piping should not exceed 3 meters).

- Use only piping approved by relevant

standards in force.

- Avoid abrupt direction changes.

- Any problem due to failure to com-

ply with aforementioned instructions in

terms of performances and noise level

will not be the supplier’s liability and the

appliance will not covered by the manu-

facturer’s guarantee.

- Use a 150 mm. constant diameter pipe

or similar section for the whole length.

CAUTION: In order to know the speci-

c input of the appliance expressed in

WATT, the installer shall tick the box cor-

responding to the type of external motor

installed found in the adhesive label pla-

ced beside the appliance rating label, as

shown in the gure below.

36

DHD7960B

1) Drill a rectangular hole in the rear side

of the kitchen worktop of the following di-

mensions for 90 cm Downdraft:

794X106mm.

2) In case of gas hobs, the minimum di-

stance from the downdraft edge to the

hob rear edge shall be of a least 60 mm.

3) Before making the hole, check that

there are no structural or other parts insi-

de the cabinet, where the appliance is to

be placed, which could hinder a proper

installation. Check that the overall di-

mensions of the Downdraft and its motor

are compatible with the cabinet so that

installation can be carried out properly.

4) Apply the glue on the lower side of the

frame (g. 2).

5) Fit the Downdraft inside the cabinet by

inserting it from above, without removing

the glass and panel protections.

6) The appliance frame shall perfectly

adhere to the kitchen upper worktop.

7) Secure the hood inside the cabinet by

using the two brackets provided (g. 3).

DHK9000

It shall be installed inside your house and

connected to the Downdraft mounted in

your kitchen by using one of the 5 outlets

available , as shown in g. 10.

It can be xed on the wall, or on the o-

or either in vertical (dis. 12) or horizontal

(dis.13) position, having the xing surfa-

ce as reference.

Fixing operations : once the position and

installation method have been chosen

, please insert the anti-vibration rubber

seals into the brackets supplied (Fig.

14C).

The rubber seals are to be positioned in

the sides that will touch the wall.

Place the brackets (g . 14A) on the con-

trol unit , by matching the unit holes with

the brackets holes and then x using the

screws supplied (g. 14B).

Place it in the installation point previously

chosen, and mark the points on the wall

where the holes are to be drilled.

Insert the screw anchors supplied into

the holes made. (g. 15A).

Place the control unit on the wall,

matching the brackets holes with the

plastic anchors and then fasten with the

screws supplied (g.15B).

Ducts connection: the appliance is

equipped with an inlet and outlet for

ducts connection (check the air direction

shown in the external label before instal-

ling the exhaust ducts, g. 16), connect

the ducts and secure them using suitable

metal clamps (ducts and clamps shall be

provided by the installer ) . The duct in

g. 16A must be connected to D7960B,

the duct in g. 16B is to be directed to-

wards the outside of the building or insi-

de your house if your hood works in the

ltering mode.

Connect the external motor cable to

the terminal block found inside the

plastic box in the hood . Make sure

to follow the wires colours when

performing the electrical connection

(g.17).

DHK8000

DHK8000 has been designed to be in-

stalled under the kitchen cabinet , whe-

re the lower air outlet of DHD7960B is

found.

Installation is possible on cabinets

whose height ranges from 900mm and

960mm. The appliance has been desig-

ned to extract vapours abd odours in an

optimal yet extremely silent way.

Installation procedure: Place the ap-

pliance under the Downdraft where the

air outlet is found, as shown in (g. 18).

All unions are supplied with the applian-

ce, along with a rectangular pipe to con-

nect the downdraft to DHK8000.

The rectangular pipe connecting the two

appliances can be cut according to the

cabinet height , see g. 18. The pipe

current length allows for installation in

960mm height cabinets.

Please take the overall dimensions

shown in gure 19 into account .

Drilling on the cabinet bottom shall vary

according to the distance of the cabinet

from the oor.

If the cabinet bottom is higher than

120mm, you just need to drill the hole to

let the pipe in , see g. 21. The hole di-

mensions are 240x100mm in this case.

If the cabinet bottom height is lower than

120mm from the oor , then you will need

to make an opening that can house the

appliance DHK800, as shown in g. 22:

in such a case the opening dimensions

will be as follows: 410mm x 410mm.

In this second case , the use of the metal

xing bracket supplied with the applian-

ce DHK800 can be useful, as shown in

gure 23.

The appliance air outlet shall be con-

nected to the cabinet outlet, so that air

collected into the kitchen can be re-cir-

culated into the room in case of ltering

version. If your appliance works in suc-

tioning mode, then the ducting shall re-

ach the outside of the building.

Ducts to be connected to the DHK8000

air outlet are not supplied with the ap-

pliance.

You can direct the appliance air outlet

according to your installation needs, by

simply rotating the air outlet ange, as

shown in gure 20.

The appliance is equipped with a 1.5

meter long power cord to be connected

to the downdraft specic terminal block

found inside the black plastic box, (Fig.

17).

Caution: do not drill any other hole on

the appliance , in order prevent any

damage on the sliding internal com-

ponents and on the electric ones, as

well .

8) Connect the appliance to the power

supply.

9) Start to open the extractable unit (see

‘ How the hood works’ chapter ) and re-

move all the protections(g. 6-7). Then

open the small door (g. 8) and remove

all the protections.

Remove the PVC protection from the

grease lters and place them as shown

in g. 9.

37

We hereby decline any lia-

bility in case of accidents

duetofailuretoconnectthe

hood to the ground or in-

correctgroundconnection.

Thefusetobeusedshallbe

10or16A.Incaseofdama-

gestothepowercord,plea-

secalltheafter-saleservice

inordertoavoidanykindof

risk.

ELECTRICAL CONNECTION

This appliance complies with Europe-

an Directives 2006/95/CE (Low Voltage

Directive) and 2004/108/CE (Electroma-

gnetic Compatibility).

The hood shall be disconnected from po-

wer supply during installation and main-

tenance operations, while fuses shall be

disconnected or removed. Electric con-

nection shall be completed before tting

the appliance into the cabinet.

Check that :

- Power is adequate.

- Power lines are in good conditions.

- Cables diameter is compliant with in-

stallation regulations.

 Caution

In case the hood shows any

anomalies, please disconnect

it or remove the fuse corre-

sponding to the appliance po-

wer disconnecting line.

USAGE

This appliance is intended to suck coo-

king fumes, greases and steam. It has

been designed to work in both suctioning

mode, with outside evacuation, and lte-

ring mode.

Exhausting piping is not supplied with

the appliance.

FILTERING VERSION

In case fumes and vapour cannot be

discharged to the outside, the applian-

ce can be used in the ltering mode,

Activated charcoal lters are required in

this operation mode (g. 10). The air re-

cycled through the charcoal lters is then

re-circulated into the kitchen, thanks to

a duct conveying the air on one side of

the cabinet.

GREASE FILTER REMOVAL, ACTIVA-

TED CHARCOAL FILTER INSTALLA-

TION

Grease lters and charcoal lters remo-

ving and tting operations shall be carri-

ed out with the downdraft open . To open

the downdraft, push the key .

Then remove the front panel by simulta-

neously pulling on the top of each side

(g. 8). The panel will rotate forward,

thus allowing to reach the grease lters.

Remove the grease lters to reach the

charcoal lters . Charcoal lters shall be

replaced (g. 11) accordingly to the ac-

tual use of the Downdraft, in any case at

least once every 6 months.

Caution: the lters protection panel

shall be re-t properly, otherwise the

hood might stop operation.

CONNECTING THE HOOD TO PO-

WER SUPPLY



Theapplianceshallbe

connectedtoa220V–240V

electrical mono-phase net-

work through a CEI 60083

approved power socket,

which shall be accessible

afterinstallation,complian-

ce with installation regula-

tions.



38

• 2 HOW THE HOOD WORKS

IMPORTANT: All of the hood features/

functions are enabled only if the suc-

tion panel/extractable unit is open.

39

The light turns on and off only

when the suctioning panel is completely

OPEN.

By pressing this key when the panel is

closed , rst the panel will open up com-

pletely and then the light will turn on.

By pressing this key you will turn the light

off.

This key lifts the suctioning panel

until it is completely open, and automati-

cally sets operation at 2°speed.

When the suctioning panel is open, this

key disables all of the functions and pulls

the suctioning panel back.

This key decreases the mo-

tor speeds, from 4th speed to motor

switching off , without closing the suctio-

ning panel.

This key displays the speed set

by lighting the Leds.

It also signals the grease lters satura-

tion by the simultaneous ashing of all

the Leds.

This key increases the motor spe-

ed when the suctioning panel is open.

After10 min from setting, this key

allows to stop the motor, close the panel

and switch off the lights.

The function set is signaled by the

ashing of the led corresponding to the

speed set. To disable the timer function,

press the key again.

40

TIMING

As a result of the EU65 “Energy label”

and EU66 Ecodesign regulations issued

by the European Commission, which

came into force as from January 1st,

2015 , our products have been adapted

to comply with these new requirements.

All of the models complying with the

energy label requirements are equipped

with a timer device that automatically

regulates the suction speed when the

air capacity exceeds 650m³/h.

External motor appliances can only be

combined with external motors that, as

for internal motor versions, are equip-

ped with a timer device regulating

speeds with air capacity higher than

650m³/h, (See instructions detailed in

the external motor section).

External motors with air capacity higher

than 650m³/h, both at IV and III speed,

are automatically temporized as fol-

lows: from IV speed it is switched au-

tomatically to III speed after 6 minutes

of operation.

If the appliance is set at III speed, it is

switched automatically to II speed after

7 minutes of operation. Nevertheless,

changing the speed set is always pos-

sible.

The energy consumption of the ap-

pliance in stand - by mode is lower than

0.5W.

OTHER FUNCTIONS

Automatic turn-off

After 4 hours of continuous operation

from the last setting, the appliance turns

off and closes automatically.

Grease lters saturation

After 30 hours of operation, the speed

indicators will all ash simultaneously,

signaling the grease lters saturation,

To reset this function, press the “TI-

MER” key for at least 3 seconds, while

the extractable unit is open.

ADJUSTMENT

The hood self-adjust every 3 comple-

te cycles performed by the extractable

unit.

By pressing the “Timer” key 6 times in a

raw (MAX 3 sec. between one push and

the other) all the leds will ash in and

the hood adjustment will be reset .

The downdraft performs self-adjustment

after the next 3 cycles.

CRUSH - PROOF SAFETY DEVICE

If an obstacle obstructs the closure of

the suctioning panel, the closure is

stopped and the panel lifts up.

41

Careful maintenance ensures proper

operation and good performances over

time.

• 3 CLEANING THE HOOD

MAINTENANCE

HOW TO PROCEED?

PRODUCTS /

ACCESSORIES TO USE

External surface

and accessories

Do not use metallic scrub-

bers, abrasive products, or

hard brushes.

To clean the external surfa-

ce of the hood and the light

housing screen use only

commercially available hou-

sehold detergents diluted in

water. Then rinse with cle-

an water and dry with a soft

cloth.

Grease lter with

extractable unit

open

Activated charcoal

lter

After 30 hours of operation,

the downdraft will signal the

grease lter saturation.

The saturation is signaled by

the ashing of the 4 central

Leds.

To reset, press the timer key .

In the ltering version, the acti-

vated charcoal lter shall be re-

placed regularly. To remove the

charcoal lter panel , rst of all it

is necessary to remove the gre-

ase lter grid and then pull the

plastic key of the panel itself,

in order to disengage it from its

seating. Follow these steps in

reverse order to t the activated

charcoal lter. Replace the used

charcoal lter on an average of

every six months.

Grease lters can be washed

by hand or in the dishwasher.

These lters need to be cle-

aned on a regular basis,

otherwise they may repre-

sent a re risk.

Ret the grease lters and

the front panel, making sure

that the panel is properly t

on both sides so that it does

not cause the downdraft to

stop operation.

The hood shall be disconnected

from the electrical network ,by both

unplugging the appliance from the

socket and activating the magnetic

circuit breaker (safety cut-out), befo-

re removing the metal grease lters.

After cleaning operations, ret the

metal grease lters as detailed in the

installation instructions.

42

• 4 OPERATIONAL ANOMALIES

PROBLEM SOLUTION

The cooker hood

does not work.....

Check that:

• There is not a power outage.

• A specic speed has actually been selected

The red reset key, found over the electrical system box, has

been pushed .

• Make sure that the wires are inserted properly in the con-

nector itself (during the connection, an excessive pressure

could bend the contacts).

The cooker hood

has low perfor-

mances...

The cooker hood

stops during ope-

ration

Check that:

• The motor speed selected is adequate for the quantity of

fumes and vapors present in the room.

• The kitchen is ventilated well enough to allow for air intake.

• The charcoal lter is not worn out ( ltering version hood).

• The air outlet channel is free and compliant with paragraph

no. 2.

Check that:

• There is not a power outage.

• The omnipolar device has not tripped.

• 5 AFTER - SALE SERVICE

Any maintenance operation on your ap-

pliance should be carried out by:

- Your retailer,

- A qualied professional technician, au-

thorized by the brand.

When calling, please mention the ap-

pliance details (model, type, serial num-

ber). This information can be found on

the rating label stuck on the downdraft.

43

• 6 ENVIRONNEMENT

CARE FOR THE ENVIRONMENT

This appliance’s packaging can be re-

cycled. Recycle and contribute towards

protecting the environment by disposing

of packaging in local waste containers

designed for this purpose.

Your appliance also con-

tains a lot of recyclable ma-

terial. This logo indicates

that used appliances must

not be mixed with other wa-

ste.

Appliance recycling organized by your

manufacturer is carried out under op-

timum conditions, in accordance with

European Directive 2012/19/EC on the

disposal of waste electrical and electro-

nic equipment.

Contact your local authority or retailer

for information on used appliance col-

lection points close to your home.

Thank you for helping to protect the en-

vironment.

Page is loading ...

Groupe Brandt DHK8000 Owner's manual

This manual is also suitable for

Groupe Brandt DHK8000 Owner's manual

in other languages

Related papers

Other documents