Jabra Speak 450 - Light Quick start guide

1

For more information, please visit

www.jabra.com

NEED MORE HELP?

Why wait? Go to our support page and find all the answers you’re looking for

24-hours a day. www.jabra.com/speak450

Made in China

MODEL: PHS003W

®

is a registered trade-

mark of GN Netcom A/S. All other trademarks included herein are the

property of their respective owners. The Bluetooth

®

word mark and logos

are owned by the Bluetooth SIG, Inc. and any use of such marks by GN

Netcom A/S is under license. (Design and specifications subject to change

without notice).

81-03711 B

Jabra SPEAK™ 450 for Cisco

GET STARTED IN UNDER

jabra.com/speak450

MINUTES

5

2

Page is loading ...

ENGLISH 2

FRANÇAIS 6

DEUTSCH 10

 14

Y 18

NEDERLANDS 22

DANSK / SVENSK 26

ITALIANO 30

ESPAÑOL 34

PORTUGUÊS 38

ČESKY 42

POLSKI 46

TÜRKÇE 50

简体中文

54

繁體中文

58

日本語

62

한국어

66

FRANÇAIS (Canadien) 70

ESPAÑOL (Latinoamericano) 74

1 CONNECT TO PC

1. Connect the USB cable to the Jabra

Speak 450 Cisco, and then plug into

any available USB port on your PC.

2. Turn on the Jabra Speak 450 Cisco.

(Set the On/O/Bluetooth switch

to the On setting, on the base of the

speakerphone).

3. Select the Jabra Speak 450 Cisco as

the audio device in your softphone.

2

ENGLISH

2 CONNECT TO MOBILE DEVICE

1. Set the On/O/Bluetooth switch to

the Bluetooth setting, on the base

of the speakerphone).

2. Press and hold (2 secs) the

Connect button on the base of the

speakerphone until the blue light

ashes.

3. Enable Bluetooth on your mobile

device, and select the Jabra Speak

450 Cisco from the list of available

Bluetooth devices. If prompted for a

password enter 0000.

Note:

You can connect and use both a PC and mobile device simultaneously.

Refer to the User Manual for more information

3

3 USING THE JABRA SPEAK 450 CISCO

Connect

button

Mute

button

Speaker

volume

Answer/end

button

On/O/

Bluetooth

switch

USB port

IMPORTANT

For full Jabra Speak 450 Cisco call functionality with your PC, download and

install Jabra PC Suite from www.jabra.com/pcsuite

4

On/o (USB)

Set the On/O/Bluetooth switch to

the On setting if connected via USB

On/o (Bluetooth)

Set the On/O/Bluetooth switch to

the Bluetooth setting if connected via

Bluetooth.

Answer call Tap the Answer/end button

End call Tap the Answer/end button

Speaker volume Tap the Volume + or Volume - button

Mute/un-mute

microphone

Tap the Mute button

Reconnect/disconnect

with Bluetooth device

Tap the Connect button to reconnect/

disconnect with a Bluetooth device

5

Page is loading ...

1 连接到电脑

1.将 USB 线缆连接到 Jabra Speak

450 Cisco，然后插入电脑上任何

可用的 USB 端口。

2. 打开 Jabra Speak 450 Cisco。

（在扬声器底座上，将开启/关

闭/蓝牙开关设定为开启设置）。

3. 选择 Jabra Speak 450 Cisco 作为

软电话上的音频设备。

50

Page is loading ...

1 連接到電腦

1.將 USB 線纜連接到 Jabra Speak 450

Cisco，然後插入電腦上任何可用的

USB 連接埠。

2. 打開 Jabra Speak 450 Cisco。

（在揚聲器底座上，將開啟/關閉/

藍牙開關設定為開啟設置）。

3. 選擇 Jabra Speak 450 Cisco 作為軟

體電話上的音頻設備。

54

Page is loading ...

3 UTILISATION DU JABRA SPEAK 450 CISCO

Bouton

Connexion

Bouton

sourdine

Volume

du haut-

parleur

Touche

Réponse/n

Touche Marche/

arrêt/Bluetooth

Port USB

IMPORTANT

Pour accéder àl’ensemble des fonctionnalités d’appel du Jabra Speak 450

cisco avec votre ordinateur, téléchargez et installez Jabra PC Suite àpartir du

www.jabra.com/pcsuite

68

Page is loading ...

Jabra Speak 450 - Light Quick start guide

This manual is also suitable for

Jabra Speak 450 - Light Quick start guide

in other languages

Related papers

Other documents