Microdia MMCmicro Operating instructions

Brand: Microdia

Model: MMCmicro

Type: Operating instructions

Microdia MMCmicro is a compact and lightweight memory card with a dimension of 14 (L) x 12 (W) x 1.1 (T) mm and a weight of approximately 0.4g. It operates on a voltage of 1.7V to 1.95V or 2.7V to 3.6V and has a minimum clock frequency of 2.4MB/sec. The card is designed to withstand a wide range of temperatures, from -25°C to +85°C, and humidity levels, from 5% to 96%RH.

The MMCmicro card is ideal for storing and transferring data, such as photos, videos, music, and documents. It can be used in various electronic devices, including smartphones, tablets, digital cameras, and MP3 players.

MICRODIA Ltd

Email: [email protected]

Website: http://www.microdia.com

MMCmicro

OPERATING MANUAL

SPECIFICATIONS CONFIRMATION OF PARTS LIST

Dimension: 14 (L) x 12 (W) x 1.1 (T) mm

Weight: Approx. 0.4g

Operating Voltage: 1.7V to 1.95V or 2.7V to 3.6V

Operating Temperature:

-25°C to +85°C

Clock Frequency: Minimum 2.4MB/sec

Operating Humidity: 5% to 96%RH

MMCmicro

Card MMCmicro

Adapter Plastic Case Manual

NOTE: Specifications are subject to change without notice.

REMOVAL OF THE MMCmicro

CARD AND ADAPTER FROM BLISTER

1. Hold a corner of the blister.

2. Clap the blister on your palm for removing the plastic case.

3. Hold the blister upside down with about an inch of distance

between the blister and the table.

4. Use your finger to push the edge of the MMCmicro

card and

adapter.

5. Then MMCmicro

card and adapter will drop on the table.

Step 1 & 2 Step 3 & 4 Step 5

REMOVAL AND STORAGE OF THE MMCmicro

CARD IN PLASTIC CASE

1. Hold the case with both hands when opening and closing.

2. Unlock and open the lid of the case.

3. Store or remove the MMCmicro

and adapter card in the tray.

Ensure the MMCmicro

and adapter are placed properly on the

tray before closing the case.

4. Lock the plastic case.

Step 2 Step 3

PRECAUTIONS FOR HANDLING AND STORAGE

• Keep out of the reach of children. Get medical advice immediately if swallowed.

• Do not touch the interface pin directly by hands, metal or hard objects.

• Do not modify or disassemble the MMCmicro

card.

• Do not wet, heat/fire, impact, drop or bend the MMCmicro

card.

• Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near

fire, a stove, an air-conditioner outlet, etc.

• Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause

damage through melting or the emission of heat/smoke or cause product failure.

• Do not place in cooking appliances such as microwave ovens or high-pressure containers.

• Do not detach the label on the MMCmicro

card and adapter. Do not attach other stickers/labels on the

MMCmicro

card and adapter.

DATA PROTECTION

• MICRODIA MMCmicro

Memory Card comes pre-formatted. Make sure to back up all the data on your

MMCmicro card before formatting.

• Do not remove the MMCmicro

card and switch off any equipment using the card when data is being read,

written and transferred. It can cause data to be destroyed.

• Insert the MMCmicro

card firmly in the correct orientation. The product will not operate correctly if it is

inserted in an incorrect orientation or not inserted all the way.

• Parental Guidance is needed when a child uses the MMCmicro

card. Teach the child how to use and protect

the product and insure that the child follows your instructions.

Microdia MMCmicro Operating instructions

Microdia MMCmicro Operating instructions

Microdia MMCmicro Operating instructions

Related papers

Other documents