Front cover
BACK cover
FO LD
FO LD
FO LD
Wireless Made Simple.
Camera 2 (Live Video)
Infrared
LED
Thumb screw
Camera
Bracket T-Bolt
Outdoor camera with
multi-position bracket
AC power adapter
microUSB / RJ45 cable
(for optional manual
connection)
Screw/Anchor Kit
Quick Start Guide
IN THE BOX
Phillips head screwdriver or drill
may be required for installation
Let’s Get Started
Model AWF51
LIVE VIEWING
1
2
FREE APP DOWNLOAD
From your smart device, DOWNLOAD and
INSTALL the free ALC SightHD App.
Tap Next.
Plug camera into an electrical outlet (allow the
camera up to 90 seconds to boot up).
Tap ADD camera on screen for direct wireless
connection of camera to App.
SightHD
3
4
5
6
7
The App will start the connection process. Tap Live View.
The Setup Wi-Fi Network pop up box will appear. Select your
home network from the menu, and then enter your home
network’s Wireless Password. Tap OK. The App will reboot
the camera. Tap image for live video.
Smart device will scan and detect camera. Once found, the
Change Password screen will appear. Enter a password and
remember it or write it down for future use. Tap OK.
ANDROID DEVICE SETUP
For detailed installation and setup, please refer to the
Model AWF51 complete User’s Guide available on our website:
www.ALCWireless.com/support
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
ALCWireless.com
Wireless
Made Simple.
Quick
Simple
Set Up
SNAP SHOT
LIVE VIEW
1
Select the Start and Stop date and time on the Select Event Filter and tap OK.
2
3
Tap the FILE that you want to playback from the list.
Tap SETTINGs icon to see
Advanced Feature options
• Sensitivity Setting
(Motion Recording)
• Email Setting
• SDCard Setting
• Recording Setting
1
Tap preview PICTURE
Tools
PLAYBACK
Antenna
Power Indicator
Signal Indicator
microSD Card Slot*
microUSB port
Microphone
Tip: Plan the location of
your cameras for optimal
viewing and proximity to AC
Power outlets, (1) power
extension cable is included.
Indoor/Outdoor Camera
Multi-position
Camera Bracket
Passive
Infrared Sensor
NOTE: Avoid installing in a location which requires the wireless signal to pass through
cement, concrete and metal structures. This will reduce the transmission range.
*microSD card (not included) is
required to record video to camera.
Tap to turn volume ON/OFF
in the in Live View mode.
Tap to RETURN to the
main page.
LIVE VIEW RECORDING
on microSD CARD*
Motion Recording
NOTE: Screen shots and icons may vary due to continuous updates to App and software development.
Tap to CAPTURE screen images in
Live View. Images automatically
save to smartphone’s camera roll
or gallery.
Tap to RECORD. One-minute recordings
save to microSD card slot on the rear of
camera, see diagram page for location
(microSD card not included).
NOTE: Do not submerge camera in water. STRANGULATION HAZARD: Infants have STRANGLED in power cords.
Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce
the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary.
For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support
NOTE: For Apple devices tap the Search icon to bring up the Events screen.
Tap CAMERA SETTING icon and then EVENT LIST icon
1
2
Manually RECORD video from Live View by
tapping Record icon. Recording will stop
after 1 minute.
To set MOTION ACTIVATED RECORDING,
Go to Advanced Features in App >
SENSITIVITY SETTINGS to select options.
Lift cover and insert a microSD card into
the rear of camera.
ADVANCED FEATURES
SETTINGS
microSD Card Slot*
*microSD card (not included) is
required to record video to camera.
Camera 2 (Live Video)
Connected
Camera 2 (Live Video)
Power Cable
Connected
1280x720
P2P, N=1, 15.00FPS
Connected
1280x720
P2P, N=1, 15.00FPS
720p Outdoor
Wi-Fi Camera
Remote Monitoring Anytime from Anywhere
QUICK START GUIDE
Model AWF51
1
2
FREE APP DOWNLOAD
From your smart device, DOWNLOAD and INSTALL the free ALC SightHD App.
Plug camera into an electrical outlet (allow the camera up to 90 seconds to boot up).
3
On your Apple device, open the Settings App. Tap Wi-Fi and under Choose A Network, select the HD-XXXXXX Network.
4
When asked for a password, enter, “12345678”. Tap Join to connect.
5
Now Launch the ALC SightHD App and the Setup Wizard will appear.
6
Tap “ ” to start the Wizard.
7
Once the screen indicates the camera is connected, tap Live View.
8
Once the camera is found, the screen will show a Live View briefly before moving to a set up screen.
9
At the next screen enter a new password and remember it or write it down. Tap Wi-Fi Setting.
10
Select your home network from the menu, and then enter your home network’s Wireless Password. Tap OK.
11
The system will reboot the camera. The reboot will be complete when the App finishes counting down from 90.
Tap still image for live video.
SightHD
APPLE DEVICE SETUP
APPLE REMOTE VIEWING
ANDROID REMOTE VIEWING
Power extension
cable
Antenna
Surface Mount
CAMERA MOUNTING
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install
camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid
pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.
Recommendations for best system performance:
• iOS 6.0 or above.
• Android: Android
smartphone or tablet (version 2.3x or above).
• Storage: Class 10 microSD memory card (up to 32 GB).
• Bandwidth: 512Kbps or above upload/download speed suggested.
CAMERA INSTALLATION + SETUP
1 2
43
Secure the multi-position
camera bracket to a stable
surface, ceiling or wall.
Loosen the T-Bolt on the camera
bracket and adjust viewing angle
using the Thumb Screw to rotate
position.
Align hole on bottom of camera
with T-Bolt to install camera.
Screw antenna into rear of camera.
Plug into electrical outlet when
ready to install App (Step 2 in
REMOTE VIEWING section).
TM
1
Uniden APPCAM25HD Owner's manual
Uniden AppCam 21 User manual
Uniden APPCAM23 User manual
Uniden G455 User manual
Kodak EP101WG Quick start guide