ALC AWF13 Quick start guide

Brand: ALC

Model: AWF13

Type: Quick start guide

Front cover

BACK cover

FO LD

Wireless Made Simple.

Let’s Get Started

Model AWF13

LIVE VIEWING

NOTE: Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.

APPLE REMOTE VIEWING

FREE APP DOWNLOAD

From your smart device, DOWNLOAD and INSTALL the free ALC SightHD App.

Plug camera into an electrical outlet (allow the camera up to 90 seconds to boot up).

On your Apple device, open the Settings App. Tap Wi-Fi and under Choose A Network, select the HD-XXXXXX Network.

When asked for a password, enter, “12345678”. Tap Join to connect.

Now Launch the ALC SightHD App and the Setup Wizard will appear.

Tap “ ” to start the Wizard.

Once the screen indicates the camera is connected, tap Live View.

Once the camera is found, the screen will show a Live View brieﬂy before moving to a set up screen.

At the next screen enter a new password and remember it or write it down. Tap Wi-Fi Setting.

Select your home network from the menu, and then enter your home network’s Wireless Password. Tap OK.

The system will reboot the camera. The reboot will be complete when the App ﬁnishes counting down from 90.

Tap still image for live video.

SightHD

APPLE DEVICE SETUP

1 2

For detailed installation and setup, please refer to the

Model AWF13 complete User’s Guide available on our website:

www.ALCWireless.com/support

SCAN

TO VIEW

COMPLETE

USER’S GUIDE

ALCWireless.com

Wireless

Made Simple.

Screw the Antenna clockwise

into the rear of the camera.

Secure the multi-position Camera Bracket to a stable

surface, ceiling or wall using the two screws. If

needed, two anchors are also included. Secure the

camera to the Camera Bracket using the three smaller

screws.

Connect the small end of the AC

adapter to the camera’s AC In jack.

Plug into electrical outlet when

ready to install App (Step 2 in

REMOTE VIEWING section).

Quick

Simple

Set Up

FEATURES

LIVE VIEW

Tap SETTINGs icon and then tap

ADVANCE to see the

Advanced Feature options

• Sensitivity Setting

(Motion Recording)

• Email Setting

• SDCard Setting

• Recording Setting

Tap preview PICTURE

Pan and Tilt: To move

the camera, simply

slide your ﬁnger across

the Android or Apple

Device’s screen up

and down or from side

to side.

Tap to RETURN to the

main page.

LIVE VIEW RECORDING

on microSD CARD*

Motion Recording

Tap to CAPTURE screen images in

Live View. Images automatically

save to smartphone’s camera roll

or gallery.

Tap to RECORD. Two-minute (approx.)

recordings save to microSD card on the

rear of camera, see diagram page for

location (microSD card not included).

NOTE: Do not submerge camera in water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords

more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of ﬁre,

electric shock and injury to persons. Illustrations are for reference only. Actual product speciﬁcations may vary.

For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support

Manually RECORD video from Live View by

tapping Record icon. Recording will stop

after approximately two minutes.

To set MOTION ACTIVATED RECORDING,

Go to Advanced Settings in App >

SENSITIVITY SETTINGS to select options.

The Advanced Settings will ask for the

admin password, default password is:

123456. You can change the default

password within the Advanced Settings.

Insert a microSD card into the rear of camera.

ADVANCED SETTINGS

microSD Card Slot*

*microSD card (not included) is

required to record video to camera.

Camera 2 (Live Video)

Connected

Tap to set the Default Position

or return to the Default Position.

To speak through the camera's speaker,

using your Android or Apple device, tap

and hold this icon and speak;

the voice will be heard through the

camera’s speaker.

Tap to turn volume ON/OFF in the

Live View mode.

720p Indoor

Pan/Tilt Wi-Fi

Camera

QUICK START GUIDE

Model AWF13

Tip: Plan the location of

your camera for optimal

viewing and proximity to AC

Power outlet.

Indoor Camera

NOTE: Avoid installing in a location which requires the wireless signal to pass through

cement, concrete and metal structures. This will reduce the transmission range.

*microSD card (not included) is

required to record video to camera.

Antenna

Connector

AC In Jack

Power LED

microSD Slot

Sensor

Internet

Jack

Reset

ANDROID REMOTE VIEWING

FREE APP DOWNLOAD

From your smart device, DOWNLOAD and

INSTALL the free ALC SightHD App.

Tap Next.

The App will start the connection process. Tap Live View.

Plug camera into an electrical outlet (allow the

camera up to 90 seconds to boot up).

Tap Set Up Wizard on screen for direct wireless

connection of camera to App.

SightHD

The Setup Wi-Fi Network pop up box will appear. Select your

home network from the menu, and then enter your home

network’s Wireless Password. Tap OK. The App will reboot

the camera. Tap image for live video.

Smart device will scan and detect camera. Once found,

the Change Password screen will appear. Enter a password

and remember it or write it down for future use. Tap OK.

ANDROID DEVICE SETUP

NOTE: Screen shots and icons may vary due to continuous updates to App and software development.

To move the camera, simply

slide your ﬁnger across the

Android or Apple Device’s

screen up and down or from

side to side.

PAN & TILT

Remote Monitoring Anytime from Anywhere

Recommendations for best system performance:

• iOS 6.0 or above.

• Android: Android

smartphone or tablet (version 2.3x or above).

• Storage: Class 10 microSD memory card (up to 32 GB).

• Bandwidth: 512Kbps or above upload/download speed suggested.

Camera 2 (Live Video)

Select the Start and Stop date and time on the Select Event Filter and tap OK.

Tap the FILE that you want to playback from the list.

PLAYBACK

NOTE: For Apple devices tap the Search icon to bring up the Events screen.

Tap CAMERA SETTING icon and then EVENT LIST icon

Connected

1280x720

P2P, N=1, 15.00FPS

CAMERA INSTALLATION

CAMERA INSTALLATION + SETUP

Indoor camera

AC power adapter

Internet cable

(for optional manual

connection)

Power extension cable

Camera Bracket

IN THE BOX

Antenna

Quick Start Guide

Screw/Anchor Kit

ALC AWF13 Quick start guide

ALC AWF13 Quick start guide

ALC AWF13 Quick start guide

Related papers

Other documents