Barclay Products 4156-36-CP Installation guide

INSTALLATION INSTRUCTIONS

P 847•244•1234 www.barclayproducts.com

6/16/08

1. Attach the two rods together by inserting the grey insert into one end and then

pushing the other rod onto it untill secure.

2. Place rod with flanges on againest wall and mark holes for flanges.

3. Attach flanges to wall and secure with screws.

4. The Neo Angle assembly fits into the flanges and is secured with set screws.

5. Rods can be adjusted to fit by cutting them with a hacksaw.

Parts Included

• 2 Angled Rod Pieces • 1 Grey Insert •

• 2 #300 Flanges • 8 Wall Screws • 2 Set Screws •

Cat. No.

4157

Neo Angle

Shower Rod

Tools Needed

• Pencil • Drill • Measuring Tape • Hacksaw (Optional) •

When assembled the rod should measure:

30” x 24” x 30”

This manual is also suitable for

Download PDF