Ronbow 212237-8-WH Installation guide

Type
Installation guide

This manual is also suitable for

Installation Sheet
www.ronbow.com
Step 1 :
Step 4 :
Ronbow Corporation, All Rights Reserved.
KARA
Model:
Step 3 :
Step 5 :
Place adhesive around top of cabinet
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece.
Figure 1.
Figure 2.
Figure 3.
Step 2 :
Position and set vanity top on cabinet
See Figure 1.
212225
212231
212237
212249
Ceramic Sinktop
25”/31”/37”/49”
Drain Cap
Overflow hole
Metal Nut
Thick rubber
washer
Tailpiece
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain
  • Page 1 1

Ronbow 212237-8-WH Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI