Ronbow Essentials 200480-1-WH Installation guide

Brand: Ronbow Essentials

Model: 200480-1-WH

Type: Installation guide

Installation Sheet

www.ronbow.com

Step 1 :

Step 3 :

Ronbow Corporation, All Rights Reserved.

Ceramic Vessel

Model:

200480

Step 2 :

Step 4 :

Position countertop opening to ensure

clearance between the lavatory,

faucet, and backsplash. Cut counter

top opening and cut-out max 16”W x

14”H. Set sink and seal with silicone or

caulking

See Figure 1.

Place a generous portion of plumbers’

putty under drain cap and insert

whole drain body inside the bowl and

through the countertop.

(There may be a small beveled rubber

washer packaged with your drain, please

discard this and use plumbers’ putty instead)

See Figure 2.

From under the drain, insert the thick

rubber washer and screw on and

tighten the metal nut. Remove excess

plumbers’ putty

See Figure 3.

Attach p-trap to tailpiece.

Self-Rimming Sinks

Drain Cap

Overflow hole

Metal Nut

Thick rubber

washer

Tailpiece

Figure 1.

Figure 2.

Figure 3.

countertop

Drain

Drain Nut

Tailpiece

Thick rubber

washer

P-trap

1

Ronbow Essentials 200480-1-WH Installation guide

Brand: Ronbow Essentials

Model: 200480-1-WH

Type: Installation guide

Related papers

Other documents