Ronbow Essentials 200005-WH Installation guide

Type
Installation guide

This manual is also suitable for

Installation Sheet
www.ronbow.com
Step 1 :
Step 3 :
Ronbow Corporation, All Rights Reserved.
Ceramic Vessel
Model:
200003
200004
200005
200006
200007
200008
200033
200034
200036
200051
200052
Step 2 :
Step 4 :
Position countertop opening to ensure
clearance between the lavatory, faucet
and backsplash. Cut 1-3/4” hole for
drain in countertop
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece
Above Counter Sinks
Note : For Ceramic Sinks without overflow
Drain
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
Drain Cap
Metal Nut
Thick rubber
washer
Tailpiece
Figure 1.
Figure 2.
Figure 3
  • Page 1 1

Ronbow Essentials 200005-WH Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI