mondolux.com.au
LINEAR LED ME02SM
⚫ This fitting requires 220-240V AC/50Hz power input to the driver. Installation should be done by qualified
electrician.
⚫Electrical Wiring and installation should always comply as per the local standards.
⚫Do not open or interchange any parts of this fitting or the warranty is void.
⚫The fitting may be hot to touch after continuous use.
⚫Do not install the fitting near heat source.
⚫Do not install any inductive loads such as exhaust fans or pond pumps etc. within the same lighting circuit
of this fitting. Issues caused by such wirings are not covered under our warranty policy.
⚫If you have any questions about the installation of this product, please contact Mondolux at 1300 601 931.
Product code
Care & Refinishing
Mondolux strongly recommends following cleaning procedures to maintain proper finish of the product.
•Do not use bleach or concentrated solvents under any circumstances.
•For Black finish: Wipe gently with a soft damp cloth or chamois. Do not use any abrasive compounds.
InsInsInstttallaallaallation Manualtion Manualtion Manual
NoNoNottteseses
Stealth 0809 Surface Mounted
8mm
5.5mm
9mm
6mm
8mm
6.95mm
0.25mm
Ø3.7mm
0.5mm
8.5mm
10.04mm
0.95mm
0.8mm
8.5mm
mondolux.com.au
LINEAR LED Product code ME02SM
Stealth 0809 Surface Mounted
Installation Steps
1. Ensure the mains power is turned off.
2. Trim the extrusion based on the required size. See picture 1.
3. Assemble the extrusion with suitable LED strip by sticking to the extrusion base. Install the diffuser and end caps.
See Picture 2.
4. Ignore Step 2 and Step 3 for fully assembled kit.
5. Screw the mounting clips in desired location using the provided screws. See picture 3.
6. Click the extrusion into the mounting clips in position and connect to the DC24V side of the driver provided
separately. It is recommended to use 2 clips per meter for a secure installation.See picture 4.
7. Installation is complete. Turn the mains on. See picture 5.
Picture 1 Picture 2
Picture 4Picture 3 Picture 5
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Fujitsu S26361-F2735-L130 Datasheet
-
WHITECROFT LIGHTING Avenue Metro Recessed User manual
-
Pledco VFI6 User manual
-
Magnuson 11336005BL Installation guide
-
Prusa3D MK3S & MK3S+ User manual
-
CTC Union DIY I3 Installation And Operation Instructions Manual
-
3D Printing Systems Up Mini User manual
-
Tevo Tarantula Pro Assembly Manual
-
Trend WRT Original Instructions Manual
-
Star Trac E Series Embedded Installation guide
