MONDOLUX ME04SM User manual

Brand
MONDOLUX
Model
ME04SM
Type
User manual
mondolux.com.au
LINEAR LED ME04SM
⚫ This fitting requires 220-240V AC/50Hz power input to the driver. Installation should be done by qualified
electrician.
⚫Electrical Wiring and installation should always comply as per the local standards.
⚫Do not open or interchange any parts of this fitting or the warranty is void.
⚫The fitting may be hot to touch after continuous use.
⚫Do not install the fitting near heat source.
⚫Do not install any inductive loads such as exhaust fans or pond pumps etc. within the same lighting circuit
of this fitting. Issues caused by such wirings are not covered under our warranty policy.
⚫If you have any questions about the installation of this product, please contact Mondolux at 1300 601 931.
Product code
Care & Refinishing
Mondolux strongly recommends following cleaning procedures to maintain proper finish of the product.
•Do not use bleach or concentrated solvents under any circumstances.
•For Black finish: Wipe gently with a soft damp cloth or chamois. Do not use any abrasive compounds.
Installation Manual
Notes
Installation Manual
Notes
Installation Manual
Notes
Stealth 1707 Surface Mounted
12mm
9.5mm
17mm
7.4mm
17mm
12.2mm
8mm
18.3mm
10.6mm
0.4mm
16.34mm
18.3mm
87°
Installation Steps
Picture 1 Picture 2
Picture 4Picture 3
mondolux.com.au
LINEAR LED ME04SM
Product code
Stealth 1707 Surface Mounted
Picture 5
1. Ensure the mains power is turned off.
2. Trim the extrusion based on the required size. See picture 1.
3. Assemble the extrusion with suitable LED strip by sticking to the extrusion base. Install the diffuser and end caps.
See Picture 2.
4. Ignore Step 2 and Step 3 for fully assembled kit.
5. Screw the mounting clips in desired location using the provided screws. See picture 3.
6. Click the extrusion into the mounting clips in position and connect to the DC24V side of the driver provided
separately. It is recommended to use 2 clips per meter for a secure installation.See picture 4.
7. Installation is complete. Turn the mains on. See picture 5.
  • Page 1 1
  • Page 2 2

MONDOLUX ME04SM User manual

Brand
MONDOLUX
Model
ME04SM
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents