2. American Standard
  3. 2889.218.222
2889.218.222

American Standard 2889.218.222 Specification

  • Hello! I am an AI chatbot trained to assist you with the American Standard 2889.218.222 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K2-66
© 2015 AS America Inc.
H
2
OPTION
®
SIPHONIC DUAL FLUSH
ROUND FRONT TOILET
❑ 2889.218
•Vitreouschina
•Ultrahighefficiencytoilet(UHET)
-FullFlush(4.8Lpf/1.28gpf)
-PartialFlush(3.4Lpf/0.92gpf)
•Roundfrontsiphonactionbowlwithdirect-fedjet
•MeetsEPAWaterSense
®
criteria
•MaPPREMIUMlisted
•IncludesEverClean
®
antimicrobialsurface
•PowerWash
®
rimscrubsbowlwitheachush
•305mm(12")rough-in
•Fullyglazed2"Trapway
•Generous9"x8"watersurfacearea
•Chromeplatedtopmountedpushbuttonactuator
•Sanitarybaronbowl
•2colormatchedboltcaps
•Limitedlifetimewarrantyonchinawareandlimited
veyearwarrantyonallmechanicalparts
❑ 2889.518Sameasabove,exceptwithTankwith
AquaGuardLiner
Separate Component Parts:
❑ 3708.216Bowl
❑ 4133A.218Tank
❑ 4133A.518TankwithAquaGuardLiner
Nominal Dimensions:
705x380x762mm
(27-3/4"x15"x30")
Fixtureonly,seatandsupplybyothers
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•CALGreenandCaliforniaEnergyCommission
(CEC)Compliant
•USEPAWaterSense
®
criteriaforUHETs
H
2
OPTION
®
SIPHONIC DUAL FLUSH
ROUND FRONT TOILET
VITREOUS CHINA
spec_2889.218H2OptionDFRev.A9/15
NOTES:
THISCOMBINATIONISDESIGNEDTOROUGH-INATAMINIMUM
DIMENSIONOF305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDERED
SEPAR ATELY.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithinthe
rangeoftoleranceestablishedbyANSIStandardA112.19.2
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibility
isassumedforuseofsupersededorvoidedpages.
C/L OF SEAT POST HOLES
5-1/2" (140 mm) CENTERS
27-3/4"
(705 mm)
8-1/2"
(213 mm)
16-1/2"
(419 mm)
15"
(380 mm)
9-1/2"
(238 mm)
30"
(762 mm
)
*
10"
(254 mm)
15"
(381 mm)
12-3/4"
(324 mm)
3/4"
(19 mm)
7"
(180 mm)
12"
(308 mm)
C/L OF OUTLET
FINISHED FLOOR
FINISHED WALL
3-5/8"
(92mm)
SUPPLY
AS
REQ'D
14"
(356 mm)
*
6"
(152 mm)
1" ± 1/4"
(25mm ± 6mm)
To Be Specied:
❏ Color:❏ White❏ Bone❏ Linen
❏Seat:AmericanStandard#5259B.65CEasyLift
andCleanRoundFrontSeatwithCoverandSlow
Closehinges
❏AlternateSeat:
❏Supplywithstop:
Certified by
IAPMO R&T
/