2. American Standard
  3. 2891200.020

American Standard 2891200.020 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the American Standard 2891200.020 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K17
BOULEVARD SIPHONIC DUAL FLUSH RIGHT HEIGHT
®
ELONGATED ONE-PIECE TOILET WITH SEAT
❑ 2891.200
•Vitreouschina
•LXP (Luxury Performance) Toilet in 020 White
• 12"(305mm)rough-in
•RightHeight®Elongatedsiphonactiondualush 
bowlwithsmooth-sided,concealedtrapway
•Highefficiency,lowconsumption
FullFlush(1.6gpf/6.0Lpf)
ConservingFlush(1.1gpf/4.1Lpf),
utilizes21%lesswater
•Meets EPA WaterSense
®
Criteria (Pending)
•EverClean
®
Surface
•PowerWash™rimscrubsbowlwitheachush
•16-1/2"(419mm)rimheightforaccessibleapplications
•Fullyglazed2"trapway
•Oversized3"ushvalve
•Generous9"x8"watersurfacearea
•2color-matchedboltholecovers
•IncludesDuroplastSlowCloseToiletSeatandcover
withconcealedseatringandeasylift-offfeaturefor
simpleremovalandreattachmentforcleaning
•Chrome-platedtopmountedpushbuttonactuator
•2color-matchedboltholecovers
•10yearwarrantyonentiretoilet
•Design coordinates with Studio and
Boulevard lavatories
Nominal Dimensions:
756x368x775mm
(29-3/4"x14-1/2"x30-1/2")
Fixtureonly,supplybyothers
❑ 5218.110Elongatedmoldedseat
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
Revised5/11
©2011ASAmericaInc.
BOULEVARD
®
SIPHONIC DUAL FLUSH RIGHT HEIGHT
®
ELONGATED ONE-PIECE TOILET WITH SEAT
VITREOUS CHINA
Certified by
IAPMO R&T
SEEREVERSEFORROUGHING-INDIMENSIONS
K18
Revised5/11
©2011ASAmericaInc.
BOULEVARD
®
SIPHONIC DUAL FLUSH RIGHT HEIGHT
®
ELONGATED ONE-PIECE TOILET WITH SEAT
VITREOUS CHINA
IMPORTANT: Water supply on the wall is required at 3-3/4" or 9" from centerline of the toilet (see rough-in). First suggested position is
hidden behind the toilet. The geometry of the toilet gives space for this installation. The second suggested position is next to the toilet.
Between these two positions, the space for the supply between wall and toilet is limited to 3-1/4". In this case, check your supply and
hose dimensions.
29-3/4"
(756 mm)
7-1/2"
(192 mm)
3/4"
(19 mm)
18-1/2"
(470 mm)
16-1/2"
(419 mm)
14-1/2"
(368 mm)
30-7/8"
(784 mm)
13-1/2"
(345 mm)
14-1/4"
(364 mm)
8-1/2"
(217 mm)
12"
(305 mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
FINISHED WALL
3-3/8"
(86mm)
3-1/2"
(83mm)
SUPPLY
AS
REQUIRED
(position 1 or
position 2)
6"
(152mm)
5-1/2"
(140mm)
3-3/4"
(95mm)
9"
(229mm)
14"
(350 mm)
FINISHED
FLOOR
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT:DimensionsofxturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.
/