American Standard FloWise 4035.516 User manual

Type
User manual

This manual is also suitable for

K40
Revised 2/08
© 2008 AS America Inc.
FloWise
®
DUAL FLUSH RIGHT HEIGHT
ELONGATED TOILET WITH SEAT
2480.216
• Vitreous china
• Meets denition for HET (High Efciency Toilet)
• Low-consumption Dual Flush Toilet
Qualies in LEEDS Program
Full ush 6.0 Lpf/1.6 gpf,
Partial ush 3.0 Lpf/0.8 gpf
• Elongated wash down bowl
Internal trapway fully-glazed,
2-5/8" (67mm) trapway
• Concealed trapway bowl
• 16-1/2" rim height for accessible applications
Chrome-plated top mounted push
button actuator
• Sanitary Dam on bowl
• Includes color-matched plastic seat and cover
• 100% factory ush tested
• 2 color matched bolt caps
• 2 year warranty
2480.516
Same as above, except with tank
with Aquaguard liner
Separate Component Parts:
3073.216 Elongated Bowl
4035.216 Unlined Tank
4035.516 Tank with Aquaguard Liner
Alternate Tank Congurations Available:
4035.516 Lined Tank
Nominal Dimensions:
31-1/4" x 17" x 31-7/8"
(794 x 432 x 810mm)
Fixture and seat only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M
• CSA B45 series
• City of Los Angeles Supplemental
Purchase Specication
• UNAR
• US EPA WaterSense Specication for HETS
FloWise
®
DUAL FLUSH
RIGHT HEIGHT
ELONGATED TOILET
VITREOUS CHINA
NN

NN

NN

$-0'065-&5
'*/*4)&%8"--
164)
#6550/
NNNN

NN

$-
NN

$-0'4&"51045)0-&4
NN$&/53&4
NN

'*/*4)&%
'-003
NN

NN

NN

NN

NN

NN

NN

4611-:
"4
3&2h%
NN

To Be Specied:
Color: White
Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12) FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS
SUPPLIED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2 These measurements are
subject to change or cancellation. No responsibility is assumed for use of super-
seded or voided pages
Certified by
IAPMO R&T
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
  • Page 1 1

American Standard FloWise 4035.516 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI