Job ________________________________________________
SUPER ERECTA SHELF
®
DOLLY TRUCKS – WIRE
N Series
L02-042
Rev. 12
/
00
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
®
11.25
SUPER ERECTA SHELF
®
Dolly Trucks – Wire N Series
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
Manufactured by:
Specifications
Standard Units: Standard wire shelf trucks
consist of four shelves, posts, plastic split
sleeves,* truck dolly with wraparound bumper and
designated casters.
Dimensions
With Super Erecta Brite™ Shelves, Plated Posts & Aluminum Dolly 63" (1600mm) Posts
Cat. No. with Casters
Shelf Width Shelf Length Two B5DN Two B5P Two 6P Two 8P
(in.) (mm) (in.) (mm) Two B5DNB Two B5PB Two BL6P Two BL8P
18 455 36 910 N336JBR
18 455 48 1220 N356JBR N356LBR N356MBR
18 455 60 1520 N366JBR N366LBR N366MBR
21 530 36 910 N436JBR
21 530 48 1220 N456JBR N456LBR N456MBR
21 530 60 1520 N466JBR N466LBR N466MBR
24 610 36 910 N536JBR N536LBR N536MBR
24 610 48 1220 N556JBR N556LBR N556MBR N556PBR
24 610 60 1520 N566JBR N566LBR N566MBR N556PBR
With Chrome Shelves, Plated Posts & Aluminum Dolly 63" (1600mm) Posts
Cat. No. with Casters
Shelf Width Shelf Length Two B5DN Two B5P Two 6P Two 8P
(in.) (mm) (in.) (mm) Two B5DNB Two B5PB Two BL6P Two BL8P
18 455 36 910 N336JC
18 455 48 1220 N356JC N356LC N356MC
18 455 60 1520 N366JC N366LC N366MC
21 530 36 910 N436JC
21 530 48 1220 N456JC N456LC N456MC
21 530 60 1520 N466JC N466LC N466MC
24 610 36 910 N536JC N536LC N536MC
24 610 48 1220 N556JC N556LC N556MC N556PC
24 610 60 1520 N566JC N566LC N566MC N556PC
To Order By Components:
1. Order shelves and posts from sheet #10.01 or
price list. (Shelves will be packed with plastic
split sleeves.*)
2. Order truck dolly frame from sheet #11.37 or
price list.
3. Order plate casters from sheet #11.37 or price list.
For more information on brake/lock caster sets
see sheet #11.70.
Important:
1. Specify “staked posts” to ensure that die casting
does not separate from dolly.
2. If truck will be towed, tranported over the road or
otherwise subjected to vibration and jolting,
specify aluminum split sleeves. (See sheet #11.40
or price list.)
3. Remember that stability decreases as the ratio of
height to width increases. Units should be kept as
wide and low as possible.